|
|
Willson Premier 6100 Series Respirators (NIOSH and EN models available)
A fit for every face and a respirator for every job.
Easiest-breathing respirator of its type loaded with features and benefits to maximize wearer protection and comfort.
Available in three sizes and has a soft sealing flange with rolled edges for increased wearer acceptance.
Head straps adjust at the crown for easy fitting and unobstructed vision.
Low profile nosepiece allows for compatibility with eyewear.
Perspiration port reduces facepiece slippage and skin irritation.
Replaceable parts and convertability to supplied air or PAPR configurations. allow versatility and reduce expenses.
NIOSH, EN and AS/NZS 1716- approved models available. |
|
| Survivair is a manufacturer of world-class respiratory protection equipment. Our name means safety. Saving lives and property. Protecting firefighters from smoke, fumes, and toxic gases. Providing respiratory protection from airborne workplace hazards. For more than three decades, Survivair has manufactured the finest, most dependable respiratory equipment money can buy. |
|
| Survivair is a manufacturer of world-class respiratory protection equipment. Our name means safety. Saving lives and property. Protecting firefighters from smoke, fumes, and toxic gases. Providing respiratory protection from airborne workplace hazards. For more than three decades, Survivair has manufactured the finest, most dependable respiratory equipment money can buy. |
|
Scott Health & Safety's range of half masks include twin and single filter masks. All Scott half masks use replaceable standard filters for cost-effectiveness. Pro² filter cartridges have a safety bayonet fitting and Pro2000 canisters have a 40 mm thread connection.
Scott half masks provide comfortable protection in a wide range of applications, from chemical treatment to agriculture. A choice of sizes each with fully adjustable anatomic fit and in skin-friendly materials ensures wearer comfort and safety.
Key Features
Comprehensive range of highly efficient Scott gas, particulate and combined filters available
Ready-Paks contain a mask and filter cartridges ready to use
Combines high quality materials with maximum user comfort
|
|
HAUG PISTON COMPRESSORS FOR OIL-FREE COMPRESSED AIR
HAUG guarantees technically and economically optimal solutions for compressed air supply, with the security of a constant oil-free quality of the compressed air.
Universal ways of operation
Due to the dry-running technology the HAUG piston compressors can be out of operation, without causing any problem compared to lubricated-compressors and screw compressors. Operation in idle run mode is not required.
Universal application for:
· Continuous operation
· Intermittent operation
· Emergency or reserve operation |
|
| Oxygen escape sets should be carried when toxic gases can be present or the atmospere can be oxygen deficient. |
|
Portable, battery driven fan respiratory unit connected to a KEMPER autodark® 750 welding protection helmet suitable for welding and grinding work. The welding protection helmet consists of an automatic electro optical filter with variable darkening shade, adjustable delay, adjustable sensitivity of the sensors and activatable grind mode.
Technical data KEMPER autoflow®
Volume flow: 140 - 210 l/min
Weight: appr. 900 g
Operating time of battery: 8 - 16 h Dark shade: DIN 9 - 13
Technical data KEMPER autodark®
Switching time (23°C): 0.0001 sec.
Light shade: DIN 4
Dark shade: DIN 9 - 13
KEMPER autoflow® with protection hood, KEMPER freshflow® with autodark® 750 and KEMPER freshflow® with protection hood available on request
|
|
| MSA´s expertise in breathing protection becomes very visible in the range of the full face masks. Comfort and quality, useful accessories and an unbelievable range of filters meet every challenge put up by hazardous gases. |
|
| PAPRs are perfect working devices, where comfortable breathing protection is needed. A blower is moving the hazardous air through filters and the wearer is provided with filtered air consistently. |
|
Scott Health & Safety's Proflow range is a comprehensive group of powered respiratory protection systems. The range offers industry specific options and a choice of flow capabilities.
This combines with a wide selection of headtops and the latest electronic developments to provide more flexibility, added safety and suitability for the widest range of applications.
Key Features
Electronic control maintains flow as filters clog
Continuous display of flow and battery status
Intrinsically safe model available |
|
The Salisbury PRO-AIR™ is a belt mounted COMPACT POWERED AIR SYSTEM that provides a continuous flow of filtered air to reduce worker fatigue and provide additional comfort when working in hot and humid conditions. The PRO-AIR works with the full ATPV range of Salisbury's PRO-HOOD line and easily attaches inside the hood using hook and pile fasteners.
The PRO-AIR kit consists of a blower unit, belt and comfort pad, rechargable battery pack, breathing hose and battery charger. Blower unit and hose are covered with a fire resisitant material that meets NFPA 70E -2004 requirements. The PRO-AIR kit is shipped in a durable carrying case. |
|
| Survivair's mask mounted PAPR weighs only 59 ounces. The belt mounted units weigh a bit more, but the belt mounted battery pack and blower/filter assembly are designed to ride comfortably on the wearer's hip, thus taking the weight off the facepiece. Silicone full facepieces are available for mask mounted and belt mounted units are come in small and standard sizes. All full facepieces come standard with a speaking diaphragm to enhance wearer communication. |
|
WillsonMax
Marathon Facemount PAPR
WillsonMaxª 8600 full facepiece for panoramic vision, unrestricted airflow and wearer acceptance.
Field-replaceable power cord reduces downtime and inventory costs.
Proven reliable 2-prong, lead acid gel batteries and charger interchangeable with Willson belt-mount PAPR increases program flexibility.
Mask-mounted blower streamlines profiles and increases wearer acceptance. |
|
- The lightweight half mask is made from a mixture of natural rubber and neoprene and features an anatomically shaped sealing frame ensuring very high wearer comfort.
- Safe positioning of the mask is guaranteed by the dual straps with quick adjustment clips.
- Large field of vision - also very well suitable for persons wearing glasses
The fresh air supply may be regulated steplessly - according to the user's requirements - whereby a shut-off device prevents the air flow from being cut off entirely.
- The compact activated charcoal filter, fixed to the belt inside a protective cage, removes vapors and gases from the air as well. The saturation degree of the activated charcoal filter may be easily determined.
- It goes without saying that this SATA respiratory protection system is silicone-free, solvent-resistant and conductive.
- Protection level: up to 100 times the MAK value (maximum workplace concentration)
- CE-approved |
|
Factair's breathing air compressors continue to set the standard in mobile long duration life support systems.
A range of models is available from 185 l/min (7 cfm) to 4000 l/min (141 cfm) and can be supplied with electric, petrol or diesel drive. The electrically driven units can be supplied in Atex versions and the diesel driven compressors are fitted with chalwyn valve and spark arrestors as standard.
Every unit produces breathing-air to the requirements of BS EN 12021:1999 and on all engine driven units a fail-safe system is fitted as standard, which, in the event of a failure, sounds an alarm and automatically switches to an onboard cylinder reserve system, allowing time for operatives to move to a place of safety.
Sale or hire options available. |
|
OIL-FREE COMPRESSORS SERIES TF
The TF series of HAUG compressors is running completely dry, i.e., without cylinder lubrication and with no oil bath in the crankcase. Contamination of the compressed air product with lubricating oils is thus excluded. Only an oil-free compressor system is capable of generating oil-free compressed
air on a continuous basis, ensuring that neither oil aerosols nor oil
vapours can enter the process.
Oil-free TF compressors are suitable for universal use. They are suitable for continuous operation, intermittent operation and for standby emergency operation with long periods of shutdown. These dry compressors are extremely reliable and permit highly economical operation with no idling costs. |
|
| Used by almost every airline in the world for filling on-board emergency cylinders. Also used by major diving contractors, emergency medical service companies and mine rescue centers. |
|
| Quality, reliability and cost effectiveness distinguish this series. These characteristics are proven daily by many customers world-wide under hardest conditions. |
|
| High pressure breathing air compressors used to fill SCBA cylinders for use in the fire and industrial safety markets, as well as SCUBA cylinders for use in diving. Compressor systems are comprised of two components: a compressor unit, which compresses clean ambient air, and a fill station, which both fills a cylinders and provides containment safety during filling. Compressors systems are available in both stationary models for use in permanent installations and mobile units for use on scene. |
|
3M Disposable Respirators offer state of the art features such as our Advanced Electret Filter material which offers exceptional low breathing resistance and the 3M Cool Flow Valve that reduces heat build-up, set us apart from conventional respirators on the market.
Combined with an ergonomic design for superior comfort, our wide range of patented technologies guarantee to deliver easy breathing and optimal protection against particle hazards. |
|
A wide variety of different Air Purifying Respirators and filters - the right product for every application!
Our range of light respiratory protection products covers everything from Particle Filtering Facepieces to Powered Air Purifying Respirators.
|
|
- Optimum protection from dust, dirt and organic vapors
- The dual filter system ensures excellent balance and a large field of vision - also very suitable for people wearing glasses
- Due to the large filter surface, the inhalation resistance is low
- The anatomically shaped mask body is made of a skin-friendly rubber mixture characterized by high deformation resistance.
- The four straps ensure safe position of the mask in all work situations. The additional dual function neck strap allows the mask to comfortably hang from the neck, i.e. during short breaks, and therefore is immediately ready for use.
- A bayonet closure allows rapid filter change and ensures thorough sealing between mask body and filter.
- The wall-mounted storage box includes the SATA Filter Timer, reminding of the correct filter replacement time
- The masks are available with an A2:P3 or A2:P2 filter combination. Protection degree with A2:P3: up to 30 times the MAK (maximum workplace concentration) value; protection degree with A2:P2: up to 10 times the MAK value.
- Naturally, this breathing mask is silicone-free, solvent-resistant and electrically conductive. |
|
Scott Health & Safety's Promask is a multi-function full face mask, providing unrivalled comfort and protection against a wide variety of respiratory hazards. It is lightweight and ergonomically designed for use in a wide variety of industrial applications. Scott's Promask is available in halo-butyl and silicone, with a choice of two sizes.
Key Features
Unique, contoured 'T' sealing edge for a comfortable and efficient fit
Available in two sizes
Wide visor and side filter fit to give an unobstructed field of vision
Easy to don and doff
Hard-coated PC visor option for solvent resistance |
|
| Air purifying respirators use cartridges or canisters constructed of carbon or paper-based filters to remove contaminants or particles from non-IDLH (Immediately Dangerous to Life and Health) environments. Air purifying respirators that rely on the user's inhalation to draw the ambient air over the filters are called negative pressure air purifying respirators. Those that utilize blower to pull the ambient air through the filters and then push it to the user are called positive pressure air purifying respirators. Air-purifying respirators have numerous applications from construction and automotive repair to pharmaceutical and oil production. |
|
Willson 6000 Series Full Facepiece Respirators (NIOSH models)
Offers a selection of styles; available in rubber or silicone and a choice of headgear.
6400 Tite-Seal ratchet headgear makes donning and adjustingquick and easy.
6500 six-strap rubber head harness comfortably accommodates hard hats.
Durable wide-vision, polycarbonate lens with a dual coating: scratch resistant on the outside, anti-fog on the inside.
Wide sealing flange design offers a secure fit.
Easily converts to supplied air and PAPR configurations.
Wide range of replacement parts that extend the life of your full facepiece.
NIOSH approved. |
|
| Survivair's mask mounted PAPR weighs only 59 ounces. The belt mounted units weigh a bit more, but the belt mounted battery pack and blower/filter assembly are designed to ride comfortably on the wearer's hip, thus taking the weight off the facepiece. Silicone full facepieces are available for mask mounted and belt mounted units are come in small and standard sizes. All full facepieces come standard with a speaking diaphragm to enhance wearer communication. |
|
Our New Survivair® System of Respirators is Designed to Give You a Better Fit.
Survivair has been protecting firefighters from smoke, fumes and toxic gases, and industrial workers against respiratory hazards in all kinds of environments since 1981. Willson® has been manufacturing respirators for over 80 years. Now, with the addition of Willson reusable respirator products to the Survivair line, we offer the industry’s most comprehensive system of air purifying respirators (APR), powered air purifying respirators (PAPR), supplied air respirators (SAR) and self-contained breathing apparatus (SCBA). With fourteen half mask styles and sizes, six full facepiece configurations, and our newly consolidated cartridge line, Survivair respirators now provide one source for more faces and applications. |
|
| Respiratory protection with filters is dependent on the ambient air. In order to use filtering respirators, the type, properties and composition of the hazardous agent in the ambient air must be known. The oxygen content in the inhalation air must be at least 17 vol.%. When using particle filters, no hazardous gases must be present; when using gas filters, no hazardous particles. In case of doubt combined filter must be used. See also our Filter Selection Guide. |
|
|
|
Breathing protection
