|
|
| Air purifying respirators use cartridges or canisters constructed of carbon or paper-based filters to remove contaminants or particles from non-IDLH (Immediately Dangerous to Life and Health) environments. Air purifying respirators that rely on the user's inhalation to draw the ambient air over the filters are called negative pressure air purifying respirators. Those that utilize blower to pull the ambient air through the filters and then push it to the user are called positive pressure air purifying respirators. Air-purifying respirators have numerous applications from construction and automotive repair to pharmaceutical and oil production. |
|
Our New Survivair® System of Respirators is Designed to Give You a Better Fit.
Survivair has been protecting firefighters from smoke, fumes and toxic gases, and industrial workers against respiratory hazards in all kinds of environments since 1981. Willson® has been manufacturing respirators for over 80 years. Now, with the addition of Willson reusable respirator products to the Survivair line, we offer the industry’s most comprehensive system of air purifying respirators (APR), powered air purifying respirators (PAPR), supplied air respirators (SAR) and self-contained breathing apparatus (SCBA). With fourteen half mask styles and sizes, six full facepiece configurations, and our newly consolidated cartridge line, Survivair respirators now provide one source for more faces and applications. |
|
Willson 6000 Series Full Facepiece Respirators (NIOSH models)
Offers a selection of styles; available in rubber or silicone and a choice of headgear.
6400 Tite-Seal ratchet headgear makes donning and adjustingquick and easy.
6500 six-strap rubber head harness comfortably accommodates hard hats.
Durable wide-vision, polycarbonate lens with a dual coating: scratch resistant on the outside, anti-fog on the inside.
Wide sealing flange design offers a secure fit.
Easily converts to supplied air and PAPR configurations.
Wide range of replacement parts that extend the life of your full facepiece.
NIOSH approved. |
|
| Survivair's mask mounted PAPR weighs only 59 ounces. The belt mounted units weigh a bit more, but the belt mounted battery pack and blower/filter assembly are designed to ride comfortably on the wearer's hip, thus taking the weight off the facepiece. Silicone full facepieces are available for mask mounted and belt mounted units are come in small and standard sizes. All full facepieces come standard with a speaking diaphragm to enhance wearer communication. |
|
| Respiratory protection with filters is dependent on the ambient air. In order to use filtering respirators, the type, properties and composition of the hazardous agent in the ambient air must be known. The oxygen content in the inhalation air must be at least 17 vol.%. When using particle filters, no hazardous gases must be present; when using gas filters, no hazardous particles. In case of doubt combined filter must be used. See also our Filter Selection Guide. |
|
Over prolonged periods of use, 3M reusable respirators offer exceptional value and quality, and all combine unrivalled comfort with ease of use.
The 3M range of reusable respirators incorporate a wide range of features designed to ensure a comfortable fit in a wide range of applications. Our Reusable Respirators protect against: industrial gases, vapours and particulate hazards.
|
|
Self Contained Breathing Apparatuses provide the user with breathable air regardless of the ambient atmosphare.
They give respiratory protection in toxic or oxygen deficient environments.
|
|
SATA vision 2000
Lightweight, comfortable breathing hood that thoroughly protects the face, hair and neck from over spray. It is also suitable for persons wearing glasses and persons with short beards or mustaches.
Fresh air is supplied steadily through a silencer to the hood without drafts.
The air supply has a variable adjustment according to the users requirements, while a shut-off system prevents airflow from being completely shut off.
The compact activated charcoal filter is worn on the belt in a protective cage and removes oil vapor and gases. The level of filter saturation is indicated.
A thin transparent visor sheet prevents reflections and distortion free vision. If the visor sheet becomes contaminated by over spray, it can be replaced quickly and easily.
For reasons of hygiene, replacement of the hood lining and the sweatband is very easy.
Obviously, the SATA respirator system is silicone-free, solvent resistant and electrically conductive.
Protection up to 100 times the MWC value (maximum workplace concentration).
NIOSH and CE approved |
|
| A self contained breathing apparatus or SCBA is a device worn by first responders, firefighters, industrial worker and others to provide breathable air in environments that are Immediately Dangerous to Life and Health (IDLH). The term "self-contained" differentiates SCBA from other apparatus connected to a remote supply by a long hose. |
|
Circuit breathing sets are air independent protection sets, which eliminate CO2 and supplement the air with oxygen. This is different to compressed air breathing apparatus because the exhaled air is circulated and does not leave the set.
Using time can be up to 4 hours, according to the type of set.
To supply the user with oxygen mixed gas, liquid or chemical bounded oxygen can be used.
|
|
| FENZY is the specialist in GROUP BACOU in the field of the respiratory equipment with open circuit and closed. In collaboration with the other marks of the Group, FENZY proposes a range of respiratory equipment very complete and recognized for its effectiveness by the professions at the risks. That it is for the firemen, the personnel of fire control in industrial environment or the civil security, FENZY is one of the European leaders in this speciality with strong technological contents. Firemen of Paris to the brigades of firemen in Poland, South America or with the Middle East, FENZY exports its know-how in the whole world. |
|
AdfloTM Powered air Respirator
We've reinvented the powered air respirator for welders. Speedglas welding shields with Adflo respirator is a light, compact, all-in-one system. The exclusive "stackable" configuration of the Adflo turbo unit means that the gas filter can be stacked onto the particle filter for additional protection from specific organic, inorganic and acidic vapours.
Fresh-airTM C Compressed air Respirator
Speedglas welding shield with Fresh-air C respirator is a lightweight respiratory system with a nominal protection factor of 200, making it an excellent choice in environments with high levels of particle fumes and gases. |
|
Scott Health & Safety's Autoflow powered respirator provides a comfortable and efficient source of filtered air to users in many industries. The Autoflow range incorporates blower units, filters and an extensive choice of headtops. Automatic control of the airflow ensures cost-effective operation and extends both filter life and battery duration. The range also offers Autoflow Ex, an intrinsically safe model.
Key Features
Automatic control for optimum flow rate
Typically more than 8 hours operation from a single charge
Airflow regulation ensures cost-effective filter use |
|
Especially designed for welders, the Optrel OS100 provides ideal protection against IR/UV radiations, flying particles, metal fumes and dusts emitted during welding and associated processes.
A blower powered by a rechargeable battery draws ambient air through a fine particulate filter and ventilates the helmet with clean and refreshing air. The unit is fitted with both a visible an audible alarm which tells the operator if the filter is blocked or the battery is low. For a well adapted fit, outstanding wearing comfort, and a perfect seal, the face seal used is made from a knitted soft flame retardant material. A comfortable flame-retardant waist belt threads through a leather lumbar support which fits the system to the user’s body. |
|
FEATURES:
PredatorTM is a state of the art welding helmet that is heat and water resistant whilst
providing high strength.
PredatorTM has excellent ventilation inside the helmet and will fit all lens sizes via a unique
lens pack system.
PredatorTM offers a modern clean shape and is light weight in comparison to similar
helmets. (Winner of Australian Design Award in 1998)
PredatorTM offers extra coverage for the head, ears and throat and is manufactured from a
special engineering resin.
PredatorTM offers excellent fume deflection through special aero-dynamic design features.
Stocking benefits are a major feature as only shells need be stocked along with the
required lens packs. The end user simply chooses the product configuration preferred.
The 133 x 114mm PredatorTM has a unique insert for magnification lens use. Simply slide
the "mag-lens" into the three position holder.
Half face MoldexTM Respiratory can be worn comfortably underneath the PredatorTM helmet.
PAPR and AirlineTM Systems tailor made for PredatorTM are also available.
U.S. Patent No. 6,185,739 |
|
| ... products without technical information |
| |
|
|