|
|
EE35 Series
Dew Point Measurements down to -60°C Td (-76°F Td)
Exact dewpoint monitoring is increasingly playing a more important role in many industrial applications, such as drying processes and air pressure pipelines. For these purposes the multifunctional EE35 transmitter series offers the ideal features.
The EE35 Series is based on a functional, user-friendly housing concept and on the proven
polymer humidity sensors of the HC Series.
A specially developed autocalibration process enables measurements in a measurement range
of -60...+60 degC Td with a Td measurement accuracy of ±2 degC.
Two freely configurable and scaleable analogue outputs are available for the two measurement values (Td, T).
An optional hygrostat output, which can be set by means of a potentiometer, provides an alarm signal in a simple way when a threshold of the permitted dewpoint is exceeded.
An optional display for the measure- ment values and the associated MIN/MAX values allows a quick overview of the current situation.
Measuring range: -60...60 degC Td (-76...+140°F Td) ; 0...60 degC T (32...140°F T)
Outputs: 0-5V, 0-10V, 0-20mA, 4-20mA
Accuracy: +/- 2 degC Td; +/-0.2 degC T
Supply: 24V AC/DC
|
|
Promet EExd offers single and dual channel moisture measurement, with integrated electronic pressure reading, within a single field-installed flameproof housing. User interface is provided through the bright vacuum fluorescent display and touch screen switches.
Comprehensive Sampling Systems of state-of-the-art design, with best practice sample filtration, pressure reduction and flow control, and a range of options are available to fulfil user specific installation and application requirements.
EExd Flameproof ATEX and CSA certified
Complete zone 1 or 2 installation
Low wattage AC supply only utility requirement
Single- or dual-channel measurement
Calibration traceable to NPL(UK) and NIST(USA)
Field calibration maintenance by user adjustment or unique sensor exchange service
Range -120 to 30 °C Dew Point, 0.001 to 30,000 ppmV
Moisture content units in ppmV, mg.Nm-3, LB/MMSCF
Integrated electronic pressure measurement
Modbus RTU and 4-20mA linear signals
Process and instrument status volt-free alarm contacts
Remote global access options |
|
EE16 transmitters are the ideal solution for accurate measurement of relative humidity and temperature at a reasonable price in HVAC applications.The well proven E+E humidity sensor in combination with the new designed electronics guarantees excellent long term stability and resistance against chemical pollutants. EE16 transmitters are available as wall or duct mounted, with current or voltage output signals.
Technical data
Measuring range: 10-95% RH; 0...50 °C
Outputs: 0-10V or 4-20mA
Accuracy: +/-3% RH; +/-0.5 °C
Supply: 24V AC/DC
Transmitters of the EE21 series have been developed for high-precision measurement of relative humidity and temperature. EE21 transmitters are available for wall and duct mounting with or without the very useful
snap in-mounting kit, which allows a quick and easy exchange of the transmitter.
Outputs can be selected between voltage and current. An optional radiation shield providing a forced ventilation is recommended for use in outdoor applications.
Special protection coating for the sensing element permits the permanent use in very pollutedenvironments.
Technical data
Measuring range: 0...100% RH; -20...60 °C
Outputs: 0...1/5/10V or 4...20mA
Accuracy: +/-2% RH; +/-0.3 °C
Supply: 24V AC/DC
|
|
The Protimeter product line offers handheld moisture meters and hygrometers for professionals. The primary markets for these products are in the building and construction, wood, agriculture and civil engineering sectors. Building surveyors and inspectors use Protimeter products to measure moisture levels in buildings and to diagnose the cause of moisture related problems. Farmers measure the moisture and temperature levels in harvested crops using our grain moisture meters and civil engineers use the Speedy(tm) moisture testers for establishing the moisture level in soils.
|
|
La série EE22 est caractérisée par une sonde interchangeable instantanément.
Les données de calibration étant stockées dans la sonde de mesure, l'échange de la sonde est réalisé sans perte de précision.
Les systèmes de calibration de haute précision et les technologies de microprocesseur nles plus modernes, sont la garantie d'une grande précision sur toute la gamme d'utilisation. L'excellente stabilité à long terme est un gage de tranquillité pour l'utilisateur des capteurs E+E.
Gammes de mesures: 0...100% HR; -40...80°C
Sorties: 0...1/5/10 V ou 4...20 mA
Incertitude: +/-2% HR; +/-0,3°C
Alimentation: 24V AC/DC
|
|
Applications:
Used to measure the moisture level in sawn timber
(also cardboard, paper) and hardened materials
(plaster, concrete and mortar). It displays the moisture
level in the material straightaway. |
|
Protimeter Aquant Non-Invasive Moisture Meter
The Aquant has a digital display that is synchronized with a color-coded LED scale. The display shows the relative moisture level of the material under investigation on a scale of 0-999 and the color coded LED scale indicates the material%u2019s moisture condition. To use, the Aquant is simply held against the surface of the material under investigation. The relative moisture level is measured by radio frequency to a nominal depth of 10-20mm. There are no needles to mark the surface and the Aquant is not adversely affected by moisture.
Range 0 - 999 Relative
Display 12 - Digital LCD
Display 2 - 60 LED%u2019s
Hold Reading Feature
Depth of measurement-Up to ¾"
Case-Pouch with belt loop.
Power-9v (supplied)
Warranty-1 Year parts and labor
Features & Benefits:
Detects moisture directly in materials and below wall and floor coverings such as tile, wood and vinyl.
Reset reading for sensitivity adjustment
Not adversely affected by surface moisture such as condensation.
Dual Display LCD and LED.
Color changing LED's to show moisture condition.
|
|
| High Speed, Intelligent, Accurate, On-Line and At-Line Measurement Solutions for the Food Processing Industry. |
|
Integrated moisture and temperature measurement.
The Protimeter Grainmaster i is a highly versatile instrument to measure the moisture and temperature of crops. The meter is pre-programmed with 15 crop calibrations, each of which can be adjusted individually, if required, for matching with respect to commercially used instruments.
It is supplied with an integrated grinder-compressor unit that enables the user to take moisture readings in ground samples very quickly and simply. There is also a range of optional probes for measuring temperature in stored grain (GRN6046) and moisture levels in baled hay and straw (GRN6138).
The Grainmaster i is supplied in a pouch with grinder-compressor unit, grain cup, sample spoon, brush and 'Quickcheck'. In addition to the 0-100 relative scale, the 15 pre-programmed calibrations include: Wheat, Barley, Oats, Oilseed Rape, Canola, Linseed, Peas, Corn, Sunflower, Coffee, Soya, Rice, Sorghum, Paddy and Beans |
|
The Vaisala HMT360 Series for Moisture in Natural Gas incorporates Vaisala's proven HUMICAP® sensor technology.
With three probe designs to choose from, the HMT360 Series is flexible enough to suit your installation requirements. Compatible with most existing sampling systems, it is easy to replace old or malfunctioning devices. Designed for high pressure systems, these probes can be installed directly into pipelines, eliminating the need for complex and expensive sample systems. With its ball valve set, the probe can be inserted and removed in low pressure systems. The transmitter is easily configured, and delivered with a one week lead time.
The HUMICAP® sensors are not damaged by glycol, and can tolerate saturated conditions and contact with water without causing measurement drift. The sensors dry down rapidly after exposure to water in the process or ambient conditions. The HMT360 Series is rated intrinsically safe for Class I Division I environments.
The stable HMT360 Series has a one year recommended calibration interval, thus saving maintenance costs and measurement downtime. Probes can be changed in the field in just a couple of minutes!
|
|
The Moistrex MX8000 Portable Paper Analyzer provides paper and board makers and paper converters with a fast, accurate measurement of moisture at-line or in the QC laboratory.
|
|
Protimeter HygroTrac
The Protimeter HygroTrac is a simple and cost-effective system for remote environmental monitoring in buildings. Data can be viewed live over the internet showing parameters such as moisture content relative humidity and temperature.
Set threshold alarms
Receive alarm warning via email and text message
Comprehensive site reports
Reduce costly site visits
Wireless Sensors
Transmit data at user-selected intervals to data acquisition gateway.
%RH
Temperature
Moisture content in materials
Data Acquisition Gateway
Data collection point receives and stores data from all wireless measurement sensors. Information is then sent to a secure web server. Data can also be stored directly on the gateway if an internet connection is not available.
Applications:
Permanent installation into a wide range of building environments where moisture and subsequent mold growth is a concern.
Monitor storage facilities where moisture sensitive products are held such as paper and timbe |
|
EASIDEW On-line Hygrometer
-100 to 20ºC total dew point range
Vacuum to 40MPa
Dual alarm
IP66 rated sensors (electronics IP54 rated)
Optimal dew point range: -80ºC to 20ºC
Operating temperature: -40ºC to 60ºC
Best accuracy: /-2.0ºC
Output: 4-20mA
|
|
... for measuring the moisture content within a split second in a production run in progress thanks to the use of microwave resonance technology.
– Moisture analysis in less than 1 second
– Complete process monitoring
– Results independent of the color and surface structure of a sample
– Non-destructive measurements
– At-line measurements also possible |
|
| The rugged Thermo Scientific MOLA is a state-of-the-art moisture on-line analyzer which uses patented neutron backscatter pulse mode ion chamber technology to non-intrusively measure the concentration of hydrogenous material in a process vessel. In iron and steel making, the MOLA is used to improve the operation of the blast furnace by accurately measuring the moisture content in metallurgical grade coke and/or iron ore pellets. The ion chamber in the MOLA acts as a hydrogen molecule detector and, based on the amount of hydrogen present, can determine the moisture in coke. Pulse mode technology allows for excellent stability and repeatability over a very wide temperature range without the need for high voltages or temperature stabilization of the circuitry. It has proven to help steel mills more effectively manage variability in coke size, harsh environmental conditions at the point of measurement and high coke volume. The MOLA is easy to install with no component exceeding 45 pounds. It also features a streamlined design that allows for rapid diagnostics and servicing of the unit. |
|
| WaSul-Hygro is a fully automatically operated, laser based water vapor monitoring system. It has a very wide measurement range (from 0.3 ppm. up to 25000 ppm.) and its response time is about a few seconds. It can measure water vapor in up to 3 independent gas streams. WaSul-Hygro can be operated under harsh conditions. Measured water vapor concentration can be stored in the system’s internal memory for a measurement period of about two months, or can be transferred to a PC or to a data logger through RS232/RS485, Modbus, or 4-20 mA. It can be supplemented with an additional laser for measuring other gas components (methane, ethane, oxygen, ammonia etc) as well. One WaSul-Hygro system is operated on-board of a passenger aircraft within the CARIBIC project (www.caribic-atmospheric.com ) since May 2005, and successfully completed more than 30 flight campaign. Other WaSul systems are operated e.g. in natural gas plants. The expected trouble free operational lifetime of a WaSul-Hygro system exceeds ten years. Each WaSul-Hygro system is delivered with a certificate of calibration, which is issued by an accredited calibration laboratory. |
|
Package D-2C consists of the mini-Ligno DXC, the Electrode E12 ,
1 pair each of pins DZ and DA, the BNC-mini Cable and the Case M.
The DX/C is one of our most popular meters with the following features:
-- a unique shape that fits comfortably in your hand when measuring
-- a measuring range low enough to check hardwood floors (5%*)
-- a measuring range high enough to evaluate wet lumber (65*)
-- a bright, digital display readable even in dark crawl spaces
-- resolution of 0.1% below the critical range of 10%
-- 20 settings for wood species corrections including a chart for domestic and tropical wood species
-- a reference scale 0-99 for non-wood building materials such as drywall, plaster and other "soft" building materials. For instance, to pinpoint problems around windows or showers, in leaky ceilings, after water lines broke or buildings were flooded.
-- connection for external cables and electrodes - to evaluate concrete or
reach hidden areas for moisture testing, even behind 7" of insulation. |
|
All Ligno-Scanners are calibrated to give true wood moisture readings in percent and have built-in corrections for different species.
With a pinless meter you can quickly scan a large number of boards, detect higher moisture levels and water pockets. Pinless meters are essential when checking finished products such as cabinet doors, table tops and ready-to-sell furniture, where pins would leave visible marks. Ideal for building inspectors to assess moisture conditions and water damage in buildings, especially since Scanners can also be used for non-wood building materials such as drywall, concrete, tile, etc. |
|
Simple
¡ö Large, easy-to-read, graphics LCD with multilingual support
¡ö One-handed menu navigation
¡ö Audio and visual alarm ¨C indicates when climatic conditions
are unsuitable for painting
¡ö No need to consult complex tables or use a slide rule calculator
¡ö Bi-color indicator light ¨C ideal in a noisy environment
¡ö All 5 parameters are constantly updated and
displayed simultaneously
¡ö Graph mode charts all 5 parameters for quick analysis
Durable
¡ö Rugged, outdoor/indoor instrument
¡ö Solvent, acid, oil, water and dust resistant ¨C meets
or exceeds IP5X
¡ö Scratch/Solvent resistant display suitable for harsh environments
¡ö Shock-absorbing, protective rubber holster with belt clip
and wrist strap
¡ö Two (2) year warranty on both body and sensors
Accurate
¡ö Fast response precision sensors provide accurate, repeatable
readings with high reliability and long term stability
¡ö Smart Trend Indicators identify rising, falling or stable readings
¡ö Certificate of Calibration showing traceability to NIST included
¡ö Conforms to national and international standards including
ISO 8502-4, BS 7079-B4, and ASTM D3276
Versatile
¡ö Internal Memory stores 2,500 datasets in 100 batches
with the simple touch of a button
¡ö Data Logger Mode automatically records all 5 parameters
at user selected time intervals. Ideal for unattended operation.
¡ö Built-in clock ¨C date and time stamps each stored measurement
¡ö Easily converts to accept optional probes including magnetic
and hand-held surface temperature probes
¡ö USB and IR ports for downloading to a PC or printer
¡ö Celsius/Fahrenheit switchable
¡ö Backlit display for dim or dark environments |
|
Handheld thermo-hygrometers of the HUMIPORT series set new standards because of the combination of the latest technology and design. HUMIPORT thermo- hygrometers offer very accurate measurement of relative humidity and temperature and also calculation of dewpoint temperature and absolute humidity.
Excellent readability of the very large and illuminated display, the simple thumbwheel operation and the very robust case also allow use in tough industrial environments.
3 models are available:
HUMIPORT 05: Compact handheld thermo / hygro- meter with fixed sensing probe
HUMIPORT 10: Handheld thermo / hygrometer with fixed sensing probe
HUMIPORT 20: Handheld thermo / hygrometer with flexible sensing probe
|
|
Easidew Portable Hygrometer has been designed to make in-field checks of the dew point in air and gases as simple and quick as possible. This totally self-contained instrument, weighing only 4 kg, is delivered ready to use. Simply connect your sample gas to the Quick Connect fittings, turn on the instrument and it will instantly trend the dew point of the applied sample.
The key to Easidew's performance is its sensor technology. Michell%u2019s Advanced Ceramic Moisture Sensor is coupled with C2TX microprocessor based measurement circuitry to produce a fully calibrated and interchangeable sensor transmitter module.
An in-built sampling system allows you to easily measure the dew point of any air or gas line, clean or dirty, at up to 20 bar pressure. A fixed orifice port arrangement allows you to select, simply by reversing inlet and outlet ports, whether to measure at atmospheric or line pressure. The integrated filter housing, accepting standard fibre filter cartridges, gives 99.999% protection against particles to 0.1 micron and to liquid carryover. All this comes as standard.
|
|
Vaisala DRYCAP® Hand-Held Dewpoint and Temperature Meter DM70
The DM70 measures dewoint temperature accurately over a wide measurement range. It is ideal for indstrial spot checking and field calibration.The probe may be inserted directly into pressurized processes, and it responds rapidly from ambient to process conditions. The sensor withstands condensation.
The DM70 features a multilingual, menu-based user interface, and a clear graphical LCD display. Three measurement parameters can be displayed, numerically or graphically, and are logged into the meter's memory. An analog output option is also available.
|
|
The HN-CH series is accurate palm-sized temperature/humidity meter with the measuring range of 0 to 100%RH by using a high performance and reliable humidity sensor.
Three types of sensors, sensor built-in type, probe type and separated type can be selected to meet various applications requirement.
It also has the data logging function capable to store up to 8000 readings each of temperature and humidity into memory, and communications function (RS232C or RS485) for various use such as mobile measurement, desk-top and wall-mount.
|
|
HUMIPORT 05/10/20
Handheld for the measurement of: realtive humidity, absolute humidity, dew point, mixing ratio and temperature
OMNIPORT 20
Multifunctional handheld instrument for: relative humidity, absolute humidity, dew point, mixing ratio, temperature, air velocity, water activity in oil and water content in oil
THERMOPORT 20
Handheld Thermometers
Handheld thermometers of the THERMOPORT series set new standards because of the combination of the latest technology and design. Excellent readability of the very large and illuminated display, the simple thumbwheel operation and the very robust case also allow
usage in tough industrial environments.
Two measuring channels, one to connect a PT100 probe and the other to connect a thermocouple probe (E/K/J/N/R/S/T type), provide measurements between -200...1200 °C (-330...2200°F).
Many different sensing probes allow the exact adjustment to the particular application.
VELOPORT 20
Handheld for the Measurement of Air Velocity and Temperature
|
|
The General Eastern product line offers portable moisture instruments that can be used in a variety of gaseous applications. Our analyzers are well balanced, compact, easy to use and come complete with all the units of measure and connectability required to keep track of the moisture critical processes in your facility.
MMY245 Moisture Analyzer – For a Speedy Response
The MMY245 Moisture Analyzer is a convenient, portable instrument that can quickly spot check the performance of gas dryers for compressed air, breathing air, and pure gas supplies. The planar capacitive sensor combines accurate dew point measurement with fast response time. The sensor is stored in a very dry environment within the analyzer between measurements, which speeds response time. |
|
Function : Absolute and relative humidity, temperature, dew point.
Large choice of probes :
- ABS hygrometry probe (wired or wireless)
- Stainless steel hygrometry probe (wired or wireless)
- 4 thermocouple inputs
- Pt 100 temperature probe
- Storage : 8000 points of measurement
> Hygrometry : from 3 to 98%HR
> Absolute humidity : from 0 to 285 g/Kg
> Temperature : from -50 to +250°C
Supplied with calibration certificate. |
|
CERMAX Portable Hygrometer
Extremely fast response
-120 to 20ºC total dew point range
Vacuum to 30MPa
Multiple engineering units
RS232 data logging inbuilt
IP65 rated
Re-chargeable batteries
Optimal dew point range: -100ºC to 20ºC
Operating temperature: -20ºC to 50ºC
Best accuracy: /-1.0ºC
Output: RS232
|
|
The HM70 is a user-friendly meter for demanding spot-checking humidity measurements. The HM70 is ideal for field checking and calibration of Vaisala's fixed humidity instruments such as the new Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330.
Three probes are available:
%u2022 HMP75 general-purpose probe
%u2022 HMP76 long, stainless steel probe, especially suitable for spot-checking in ducts
%u2022 HMP77 with a small sensor head at the end of a 5-meter cable, ideal for difficult-to-reach areas and for on-site calibration of Vaisala's process transmitters.
The HM70 features a multilingual, menu-based user interface, and a clear graphical LCD display. Three measurement parameters can be displayed and logged into the meter's memory at the same time. An analog output option is also available.
|
|
RH490 - Precision Thermometer
Highest 2% RH accuracy with Grains Per Pound (GPP) Display
RH390 - Precision Psychrometer
Highest 2% RH accuracy
RH401 - Digital Psychrometer InfraRed Thermometer
Humidity, Wet bulb, Dew Point, Air Temperature plus IR for Non-contact Temperature measurements
RH405 - Digital Psychrometer InfraRed Thermometer Kit
Includes a RH401 with 33% and 75% calibration bottles, PC cable, and case
RH350 - SuperHeat Psychrometer
Humidity, Wet bulb, Dew Point, Air Temperature plus External Probe Temperature measurements
RH300 - Digital PsychrometerRH300 - Digital Psychrometer
Humidity, Wet bulb, Dew Point, Air Temperature plus External Probe Temperature measurements
|
|
|
|
Humidity measurement instruments
