|
|
The Combo concept is the result of a development project in co-operation with global food and beverage companies who handle large volumes of liquid products.
The concept is based on large foldable containers with flexible liner bags. The liner bag is placed inside the Combo and filled with the liquid. This results in a packaging system which;
* dramatically reduces the packaging costs compared to traditional alternatives;
* simplifies handling throughout the logistics process;
* provides hygienic, safe transportation and storage of liquid products;
* is returnable, reusable and totally recyclable.
|
|
Due to its thought-out construction, the Intermediate Bulk Container (IBC) is a re-usable transport system which saves money within the goods cycle.
Advantages in comparison with traditional one-way systems:
- Costs per transport are reduced considerably
- Re-usable container (only liner bag is disposable)
- Hygiene – no decaying, no corrosion, easy to handle
- Safety – product is predected and traceability in combination with RFID Transponder
- Easy filling, emptying and transport
- Optimal space utilization – stackable and collapsible
The new IBC has a considerable cost advantage in comparison with conventional systems due to the collapsible construction and the changeable liner bags.
The new IBC offers maximum safety and hygiene through changeable liner bags – on request also available in antiseptic form.
|
|
|
|
|
|
Buckhorn is pleased to introduce a wide range of Intermediate Bulk Containers (IBCs) for safe, sound and secure liquid material handling. The Buckhorn IBC selection is represented by two distinct lines: the new Caliber Series, featuring products acquired from Schoeller Arca Systems, and Buckhorn’s original Citadel and Citadel-v line - providing a variety of choices for any application!
These injection- and structural foam-molded containers are compact, collapsible and designed to handle both fluid and dry products. Their clear advantages over traditional single trip, disposable alternatives include:
- Molded from FDA-approved materials, USDA-approved designs
- Substantially lowers packaging costs and cost per trip with a returnable / reusable system
- Limited use of packaging materials (only the liner bag is disposable)
- Hygiene - containers do not rot or become corroded, and are easy to clean
- Safety - improved product protection and storage
- Easy to fill, discharge and transport
- Optimal space utilization - stackable and foldable
- Secure stacking up to five-high with up to 3,000 lbs. of product*
- Withstand temperature extremes
- Certified for rail shipping
- Tamper-evident features
- RFID and other identification options available
- Can be filled and shipped with hot liquids
|
|
|
|
|
|
« IBC » means « Intermediate Bulk Container ». An IBC is therefore a mobile, flexible and rapid storage device for any powder or granulates. The DOSICON IBC developped by JetSolutions SA offers following features:
- Dosing of the discharge of the IBC, for example when a batch is made of various powders stored in IBCs
- Weighing of the discharged quantity of an IBC, either by loss in weight or by gain in weight
- Easy extraction of the powder stored in DOSICON IBC, even compacted
- Guarantee of a proof closing of the IBC cone valve
- Cleaning of the inside of the IBC with a CIP system
Working Principle:
- The cone valve is placed and guided in the conical bottom of the container
- Total proof closing by means of an elastic gasket, inflatable on option
- Total proof closing by pulling down the cone valve into its seat after discharge of the product
- Opening of the cone valve by means of a pneumatic cylinder jack
- Adjustable opening by setting the stroke of the jack (basic version)
- Full range adjustable opening by means of a pneumatic motor adjusting the stroke of the jack (dosing version)
- Dosing of the discharged product by adjustment of the opening of the cone valve versus the weight on scale, through an interface terminal IT 9000
- Vibration of the cone in open position
|
|
ORBIS has broadened its BulkPak® product line and now offers the largest selection of bulk containers in the industry, in footprints from 32" x 30" to 78" x 48".
ORBIS BulkPak containers protect product during picking, assembly, processing, storage and distribution applications in many industries, including pharmaceutical, poultry, automotive, appliance, aerospace, bakery, produce, apparel and electronics.
Bulk containers are available in light-duty, medium-duty and heavy-duty designs to meet a wide range of application requirements. These containers are available in collapsible, straight-wall and nestable styles and offer the strength and rugged durability demanded in today’s material handling and distribution systems.
|
|
|
|
|
|
Our IBC Line Modular System is characterized by three elements: Quality, safety and cost effectiveness. As a developer back these claims with our company name. Among the quality parameters are, on the one hand, our safe, highly molecular PE-HD containers with the time-tested original WERIT drainage valves for liquids of virtually any consistency. On the other hand, we have won acclaim for our patented open steel tubing frame. By now it has established itself as the international benchmark that has long been considered the standard for the open frame design. Last, but not least, we are renowned for our WERIT in-house developed highest quality plastic palettes (which are optimally available in wood or as combination palettes), which will always put your bottling media on solid footing.
Regardless of whether you are packaging acids, paints, brine or food – WERIT
IBC Lines are compatible with virtually any liquid.
Consequently, they provide the basis for cost effective rail, road and ocean logistics. WERIT IBC Lines have been tested to meet the highest standards. They have been consistently rated safe for use and have received all pertinent approvals. Their safety has been certified through lifting, stacking and hydraulic interior pressure tests. They have also been tested for the tightness of their seals and have undergone vibration and fall tests – and passed all with flying colors.
|
|
Tank material:
Stainless steel 304 304L 316 316L 316Ti 321
Wall thicknesses:
2.0 mm or 2.5 mm for the top, shell and hopper
Manhole:
DN 400 or DN 457 in the top, with screwed cover and eyebolts or tension ring
Hopper:
30°, 45° or 60° angled slopes (other angles possible), outlet diameter NW 150 or NW 250
Seals:
According to customer requirements and/or application
Transport frame:
Galvanised or stainless steel, sprayed on request (stackable, suitable handling by crane and all other pallet lifting equipment)
Application:
Chemicals/petrochemicals, food industry, construction industry, plant construction
|
|
|
|
|
|
The need for cost-effective packaging for bulk liquids has long been acknowledged. Today the choice has never been greater with bag-in-box providing a flexible and convenient alternative to traditional bulk containers.
Bulk up your profits with Rapak’s bag-in-box. Our packaging will bring significant financial gains to your business.
Bulk Bag-in-Box is:
- Environmentally Friendly Eliminating expensive and problematic effluent cleaning No buckets, drums or rigid containers to dispose of
- Economical (through reduced transport and storage costs) Up to 50% improvement in pallet utilisation compared to drums 1000 litre containers can be stacked up to 5 high when full Fold-down containers can be stacked 6 per pallet when empty
- Hygienic No internal cleaning required Airtight filling eliminates any contamination problems No air ingress prevents skinning and aids easy pump discharge Meets relevant food/pharmaceutical standards
Major Benefits
- No internal cleaning required
- No buckets, drums or rigid containers to dispose of
- Transport and Storage Costs significantly reduced
- Meets relevant food/pharmaceutical standard
|
|
PH-BIN
The PH-Bin is an IBC (Intermediate Bulk Container) designed to handle and blend powders and granulates. The equipment is manufactured in compliance with the most restrictive GMP requirements and can be interfaced with the loading and unloading systems of the Vima Pharma Handling Systems.
MAIN CHARACTERISTICS
- Bin frame completely built in AISI 304 stainless steel and internal parts built in AISI 316 stainless steel, mirror polished.
- The rectangular cross section, combined with the inclination of the upper part and the hopper, ensure perfect mixing efficiency.
- The large bending radius without dead points, together with the round cross section of frame and legs, avoid water stagnation facilitating cleaning operations.
T-Bins are also available to handle capsules and tablets. They have a cylindrical shape and the loading lid decentralized on the upper part to simplify product loading from a tablet press or a capsule filler.
|
|
MANUBAG, BULK BAG CONTAINER
Manubag TM, Bulk Bag Container
galvanized (standard model), painted or in stainless streel
the Manubag is composed of: 1 top frame + 4 Tubes + 1 lower Frame
Technical specifications - Standard Model with a distance between the centers of 950 mm
External dimensions : Lower frame 1130 x 1130 mm for a Manubag with a distance between the centers of 950 mm.
maximal charge : 2 Tons
other dimensions are available (special production)
|
|
BULK LOADING
Mobile bulk loading system
HAVER bulk loading machines for loading cargo vehicles are equipped with our high-performance weighing systems. With this combination you'll get a a high-speed time-saving system that's built completely by HAVER. The integrated high speed weigher weighs during the filling process, and thus eliminates subsequent time-consuming weighing steps.
The advantages of the HAVER bulk loading system:
Only one operator is needed for starting up the system
Lifting or lowering the telescoping tube and re-start of filling is done by the vehicle driver
Exact vehicle stopping under the telescoping tube via video monitoring
Short filling times
High weight accuracy - thus no re-filling after check-weighing of trucks is necessary
Overfilling of trucks is thus avoided
|
|
| ... products without technical information |
| |
Coke unloading
Fives Solios takes into account the whole process of handling all raw materials at the inlet of the anodes plant, as well as storing and unloading the pitch at the terminal.
Fives Solios equips the anodes plant with a station for unloading the coke destined to trucks equipped with automatic unloading "udders". It integrates the collection of dust and storage in daily coke silos.
|
|
Ship container BULK loader type CBL
New unique loader ideal for loading of dry bulk commodities into containers, such as sugar, malt, fish meal, grain or almost any other granular product.
Sturdy screw conveyor with special designed pressure outlet for optimum filling of container liner.
Remote controlled sidewise and vertical movement of outlet.
Easy moveable by e.g. a fork lift truck.
Feeding hopper for connection to a gravity bellow feeder or other customer specific feeding system.
Capacity: one 20 feet container in 20 minutes.
New:
We can now also supply a unique pneumatic container un-loading system.
|
|
BULK CONTAINER FILLING
FIBCs, Octabins, boxes and other types of semi-bulk packaging are a cost-effective variant when compared to bags and other small packages.
The following large types of packages are effectively filled and proven in use by HAVER machines:
1-loop FIBCs
2-loop FIBCs
4-loop FIBCs
boxes / Octabins
barrels and drums
|
|
| ... products without technical information |
| |
HAMO KG
Cleaning System for Containers
Wash chamber 1000-1200/1300-2000/1700-2900 mm (39.37-47.24/51.18-86.61/66.93-114.17 inches) (W/H/D).
The economical system for cleaning, drying.
The HAMO KG was developed specifically for industrial areas. The machine is designed for cleaning the following parts:
* large parts with dimension as of 1000/1000/1000 mm (39.37/39.37/39.37 inches) (W/H/D)
|
|
|
|
|
|
IBC Mixers
Mixing in Intermediary Bulk Containers (IBCs) can be a challenging task. With the restricted opening and problematic vessel geometry it is difficult to find a mixer which can operate efficiently in these containers. Conventional agitators can provide adequate in-tank movement at low viscosities, but they are generally less effective and can be difficult to clean.
The Silverson Ultramix is designed to provide solutions to challenges such as this. The small diameter dynamic mixing head provides vigorous in-tank mixing, even at higher viscosities, eliminating dead areas in square vessels. This also reduces power requirements and simplifies cleaning – the Ultramix is designed for CIP (Cleaning-in-Place) and complies with 3A, USDA and cGMP requirements.
To further enhance the capabilities of the Ultramix in this application Silverson has designed a mixing station for use with IBCs. The unit incorporates a number of safety features and is available as either a mobile model which can be moved between vessels, or a floor/wall mounted station for operation in a designated area. Various levels of automation are available from safety interlocked manual operation to fully automated systems.
|
|
| ... products without technical information |
| |
The road transport of products in powder form or granulous is an activity very specialized by the products, the users and the technology of the vehicles.
The transported products come from three distinct industries: chemical industry, food industry and mineral industry.
|
|
|
|
