|
|
Universal use with high pressure force up to 150 kN, suitable not only for clinching
• Clinching of austenitic stainless steels 1.4301, 1.4571 and others
• Wide horizontal and vertical throat
• Lower frame horn exchangeable and adjustable in height
Length 1270 mm
Width 720 mm
Height 1980 mm
Work height 1100 mm
Throat horizontal 500 mm
Throat vertical, max. 480 mm
Throat opening 95 mm
Weight 1600 kg
Pressure force 150 kN
Combined material thickness max. 5,5 mm
Suitable for joining austenitic stainless steels up to 2.5 mm
|
|
Examples :
Clinching unit, built for a component manufacturer for car industry. C-frame solution providing 3 joints R-DF 8, including positioning- and take-out devices for semi automatic production. Left- or right-door units are automatically detected and joint accordingly.
|
|
RIVCLINCH® Modular Systems
Under the "modular systems" product series, there is a standard range of Clinch tools available to you, from which you can compile individual Clinch tools within various module systems based on user requirements.
The module systems are divided into three main groups, which differ in terms of their respective max. joining force.
- RIVCLINCH® P35 S with 35 kN max. joining force
- RIVCLINCH® P50 S with 55 kN max. joining force
- RIVCLINCH® P75 S with 75 - 105 kN max. joining force
Special designs are also possible based on this modular system.
A modular RIVCLINCH® system consists of the following basic components:
- C frames
- Setting cylinders
- Tool set
- Pressure intensifier (booster)
Optionally, the system can be expanded by:
- Axle balancing slide
- Gyroscopic suspension
- Balancer
- Clinch cycle monitoring
The RIVCLINCH® systems from the modular series can also be integrated into automatically controlled production systems.
|
|
Extremely simple construction, high lever operating/pressing force ratio and highest safeguard while working.
Press fundamental feature is the easy and quickie interchange and adjusting of punches and dies.
It doesn’t work with any energy source, apart the manual force, thanks to the lateral lever that with a move of 90° can enable a high pressure.
Wide use in many production lines.
|
|
TOX-Presses
The gentle giants
Power + Intelligence:
Force capacity from 2 to 2000 kN intelligently monitored
Modular Design:
Even in the selection of a standard press, you have vast possibilities to individualize your press. The modular TOX principle provides for an uncomplicated realization. Also a customized press, dimensionally and functionally.
Press frames
- C-frames
- 2 column
- 4 column
- Welded frames
Drive modules, Machine Bases, Tooling, Part Loading,
TOX-Controls; TOX-Monitoring
Perimeter Guarding, Safety Equipment
|
|
PEMSERTER® Series 2000® Press
Click for more info. An 8-ton (71.kN), fully automatic with programmable logic controller, menu driven touch screen, built in safety device and 24" throat depth.
|
|
PEMSERTER® Series 4® Press
Click for more info. A 6-ton (53.4kN), manual, pneumatic press with built in point-of-operation safety device and 18"(45.7cm)-throat depth.
PEMSERTER® Series LT/4™ Press
Click for more info. A 3-ton (26.7kN), manual pneumatic press with internal point-of-operation safety device and 10"(25.4cm)-throat depth.
|
|
| ... products without technical information |
| |
RIVCLINCH® Pliers
The extensive range of pliers offers the user the option to cost-effectively use the Clinch technology in their operations. The RIVCLINCH® range of pliers is designed to allow you to find the right solution for each application.
A large number of the tools are suitable for all handheld devices, allowing them to be interchangeable.
A handheld RIVCLINCH® device consists of the following components:
- Tool head
- Pressure intensifier (booster)
- Handle or two-hand start
- Tool set
- Hose package
|
|
TOX Joining Technique
- the leading clinching system with many advantages:
* economic - Clinching is significantly more cost efficient than spot welding
* reliable - We guarantee joint strength values
* versatile - Clinching is usable for numerous material combinations
* environmentally friendly - Clinching is energy saving, clean, quiet
* user oriented - TOX = technology + production equipment from one source
TOX-Tongs
These C-frame or X-version tongs are driven hydraulically, pneumohydraulic or elecrically.
Standard versions include TOX-Handheld, TOX-Machine or TOX-Robot tongs.
Available with various throat depths.
The modular kit system allows to adapt these TOX-tongs to any component and handling equipment. Special models are possible. In this way, all applications and quality assurance
tasks will be fulfilled with a clear interface.
|
|
Portable unit
Length 300 mm
Width 32 mm
Height 165 mm
Throat opening 6 mm
Throat, horizontal 34 mm
Throat, vertical 30 mm
Drive hydraulically
Weight 4 kg
Pressure force 50 kN
For use with a single acting hydraulic unit like our HAT 520.
|
|
Description:
JAC-024-1
Thread Size: 0.190-24(#10-24)
Thread Code: 0.24
Shank Code: 1
A max: 0.038
Min. sheet thickness: 0.040
Hole size in sheet +0.03: 0.406
Min. Dist Hole C/L To Edge: 0.36
C max: 0.405
D max: 0.405
E + - 0.25: 0.47
T1 max:0.17
T2 max:0.27
other sizes are fully available: 440, 632, 832,032, 0420, 0428, M3, M4, M5, M6.
Features:
1. Self-adjustment function can complement the error of hole size in sheet.
2. Locking and non-locking styles both are available.
3. Carbon steel and stainless steel material both are available..
|
|
|
Arnold Umformtechnik GmbH, the fastener specialist, has explored fresh avenues in marketing the RIVTEX clinch system. When combined with the intelligent tool technology and process system produced by its subsidiary, Arnold & Shinjo, the RIVTEX range, consisting of clinch studs and self-piercing nuts, truly is a cost-reducing package.
|
|
NUTFIX™ self clinching nuts provide the solution to achieving a thread
function in metal sheet of any thickness.
This type of fastener is installed using a press.
The performance of NUTFIX™ nuts is outstanding - in terms of both
torque resistance and tensile force. It can therefore be used in numerous
applications, even those subject to significant stress.
|
|
Description:
JS-1224-3
Material: Carbon steel
Thread Size: 0.216-24(#12-24)
Thread Code: 1224
Shank Code: 1224
Min. sheet thickness: .091
Min. Dist Hole C/L Edge: .31
T + - 0.25: .13
A max: .087
C max: .276
E+ -0.25:.38
other sizes are fully available:
256, 348, 440, 632, 832, 024, 032, 0420, 0428, 0518, 0524, 0616, 0813, 0820.
M2, M3, M3.5, M4, M5, M6.
Features:
1. To provide internal thread; the sheet thickness can reach 0.8mm.
2. Carbon steel, stainless steel and aluminum material are available.
3. JSP style can be used on stainless steel sheet.
|
|
AS, AC, LAS, LAC
Floating action compensates for mating hole misalignment. Available with locking or non-locking threads. Thread sizes #4 to 1/4" and M3 to M6.
LK, LKS, LKA
The PEMFLEX® design provides MIL-N-25027 locking performance without damaging mating threads. Thread sizes #2 to #10 and M2.5 to M5.
WN, WNS
Unique PEM design prevents burnouts and eliminates the need for indexing and retapping to remove weld spatter. Thread sizes #4 to 1/4" and M3 to M6.
|
|
Self-crimping stud for press fitting
Column-Spacer for press fitting
Flush nut for press fitting
Self-crimping nut for press fitting
Self-crimping cage nut (Square or oblong indenting device)
Weld lugs
|
|
Steel & Stainless Steel Clinching Nuts
EDM-S, EDM-SS, EDM-CLS, and EDM-CLSS
Aluminium Clinching Nuts
EDM-CLA
Clinching Nuts for Stainless Steel
EDM-SP
Lock Nuts
EDM-SL
Flush Nuts
EDM-F
Miniature Nuts
EDM-U, EDM-UL, EDM-FE, EDM-FEO, EDM-FEX, EDM-FEOX
|
|
|
|
|
|
Features
Unlike spot welding, joints can be created in-die with clinch fasteners and automated equipment
Can be used where welding is impossible or undesirable, such as joining dissimilarmaterials, precoated
sheets, and high strength thin sheet metals
Unlike welding, clinch fasteners do not create a heat zone in the materials during installation
Can be installed after the painting or coating process, with virtually no aesthetic damage to the application
Allows simple visual inspection to determine proper fastener seating
Placing equipment ranging from manual working station to multiple, high rate setting machines
Benefits
Lowers in-place costs, maximizes assembly flexibility
Corrosion resistance is maintained
Changes and damage to the application materials are minimized
Can eliminate welding operations and its environmental and safety hazards
Avoids cross-threading and other problems caused by coated or painted threads
Joints do not require destructive testing to determine installed strength
Use of threaded fasteners ease servicing while providing high joint strength
Strux® Fasteners
STRUX® clinch studs (external threads)
STRUX® clinch nuts (internal threads)
unthreaded STRUXtite® nuts for use with TAPTITE® thread-rolling fasteners are available as specials
Available in sizes M4 – M12
Optimum performance in sheet metals over 1.5mm thick
Optional Prevalok® prevailing torque feature
Rivtex® Fasteners
Rivtex® clinch studs (external threads)
Rivtex® pierce-clinch nuts (internal threads)
Available in sizes M5– M10
For thinner sheet metals, including high strength thin steel sheets and aluminum sheets
clinch products: 0.75mm to 2.0mm
pierce-clinch nuts: 0.75mm to 2.0mm (steel); 0.75mm to 3.0mm (aluminum)
|
|
KPS6 Used in plated thru-holes in multi-layer P.C. boards. The self-expanding shank ensures positive contact with plated thru-holes. Thread sizes #4 to #10 and M3 to M5.
SOAG, SOSG Used to ground P.C. boards to steel or aluminum chassis. Annular projecting teeth eliminate the need for serrated or starwashers to make good electrical contact with the circuit foil. Thread sizes #4, #6, and M3, M4.
KFE, KFSE
Standoffs available with or without threads for mounting into P.C. boards, for spacing or stacking.Thread sizes #4, #6 and M3.
|
|
|
CNF Captive Floating Clinch Nuts are a very useful fastener for reducing the problems caused in assembly of pre-fabricated boxes where tolerance build up or inaccuracies due to bends occurs. Whilst the outer shell of the fastener is captive in the sheet there is a separate inner nut which moves within the outer shell without rotating. This allows the small amount of movement required to 'fix' the tolerance errors. Available in Steel Zinc and Clear Code 60, or Stainless Steel Code SS. These products are suitable for use in materials of Rockwell Hardness of B - 70 or less.
|
|
|
I autofissanti dice C and CS guarantee resistant threads to forts loaded with extraction and torsion on sheets also of minimal thickness (not inferior to 0,8 milimeter). I dice C and CS are constructed in compliance with military detailed lists MIL-N-45938/1. Autofissanti hinges CH/CHS/CHA to flat head allow to create threads on foils (the minimal thickness 1 milimeter) with elevated guarantees of held to torsion and traction. The colonnine distance them autofissanti CFSO/CFSOS - CFBSO/CFBSOS have been planned for a practical and fast installation with whichever normal pneumatic, hydraulic or mechanical equipment. It distances them, is with passing thread is with blind thread, are uses you on sheets of not inferior thickness to 1 milimeter. They are not necessary secondary operations of reaming or slobber before the installation.
|
|
The SPACERFIX™ self-clinching standoff is the solution to obtaining a
spacer function.
SPACERFIX™ is a component that is press-clinched on thin metal sheet.
|
|
Description:
JSOA-3.5 M3-6
Materail: Aluminum
Thread Code: 3.5 M3
Min. sheet thickness: 1
Hole size in sheet: 5.4
Min. Dist Hole C/L To Edge:6.8
L 0.05 -0.13: 6
D Dimension - 0.25:3.5
pfc - 0.13: 3.2
C - 0.13: 5.38
H Nom: 6.4
other sizes are fully available:
440, 6440, 632, 8632, 832, 032, 4116, 6116, 6143, 8143, 8169,8194
M3, 3.5M3, M3.5, M4, M5
JBSO,JBSOS,JBSOA,JBS04,JSO4,JSO,JSOS,JTSO,JTSO,JTSOS,JTSOA.
Features:
1. Having blind end and throughout end two styles, they are used in case and circuit board so that to play the good role of separation and fastness.
2.Can be used on the stainless steel board thickness 0.04"/1mm.
3. Steel, stainless steel and aluminum material are available. "
|
|
Through Threaded Standoff
EDM-SO,EDM-SON, EDM-SOA, EDM-SOS
Through Standoff for Thin Sheet
EDM-TSO,EDM-TSOS,EDM-TSOA
Standoff for Stainless Steel
EDM-SO4 THRU-HOLE THREADED STANDOFFS
Self Clinching Type Through Standoff
EDM-KFE, EDM-KFSE
Blind Standoff
EDM-BSO, EDM-BSON, EDM-BSOA, EDM-BSOS
Blind Standoff for Stainless Steel
EDM-BSO4 BLIND THREADED STANDOFFS
Grounding Standoff/Broaching Nut
EDM-SOSG AND EDM-SOAG
Locking Standoff
EDN-CSS, EDM-CSOS
Keylock Standoff
EDM-SKC
Blind Fasteners
EDM-B, EDM-BS
Quick Release Standoff
EDM-SSA, EDM-SSS, EDM-SSC
|
|
KFB3
For spacing or stacking P.C. boards. Special shank is flared to increase pushout resistance. Thread sizes #4, #6 and M3, M4.
KFE, KFSE
Standoffs available with or without threads for mounting into P.C. boards, for spacing or stacking.Thread sizes #4, #6 and M3.
|
|
| ... products without technical information |
| |
... see all the products in the category
Inserts
|
 see the results for the following category : Nuts |
|
|
