|
|
- The APEL AP-1000M photoelectric colorimeter adopts latest advance in microprocessor technology, the instrument provides a large LCD digital display for direct reading, %Transmittance, Absorbance and Concentration, and Auto Aero.
- The test results are displayed by a large digital LCD displayer and are displayed digitally from 0 to 100% Transmittance, 0 to 1.999 Absorbance, and 0 to 1999 Concentration at each wavelength of 5 professional filters which are built in the equipment.
- Sample compartment contains both round test tube and square cuvette.
- AP-1000M can be used not only with 9V battery but with optional 12V car battery adapter or AC adapter.
- AP-1000M is suitable for educational, biochemistry, agriculture, water and wastewater fields.
- The AP-1000M photoelectric colorimeter is equally reliable in laboratories, plants, classrooms or fields.
|
|
MINICOL Color Professional tester
One Button Color Analysis by Professional filter Photometer
MINICOL is a milestone in color scale testing for measuring liquid samples in the petroleum industry. The fully automated tristimulus filter chromameter MINICOL was specifically designed to offer precise color measurement of various liquid petroleum samples. MINICOL comes factory calibrated to measure color according to all major industry professional scales.
Features
* Saybold Color (ASTM D156, ASTM D6045)
* ASTM Color (ASTM D1500, ASTM D6045 and DIN ISO 2049)
* Platinum-Cobalt (Pt-Co) Color (ASTM D5386, ASTM D1209, ASTM D1686)
* CIE Values (ASTM E308)
* Microcontroller based
* Factory calibrated - no further calibration necessary
* True one-button analysis
* RS 232 & USB interface
* Results in less than 30 seconds
* Simple and small
* Cost efficient |
|
| NEW CS-200 Chroma Meter to measure luminance, chromaticity, gamma and contrast of light emitting products, such as large flat panel and plasma professional displays, compact LCD's and OLED's, outdoor screens, high pressure lamps and instrument panels. CS-200 has 40 high accuracy sensors to calculate spectral response; 3 selectable measuring angles; measurement speed as low as 0.5 seconds. Performance comparable to many spectroradiometers on the market today. |
|
Spectrophotometric chromameter with external probe and 45°/0° measuring geometry according to DIN 5033
Color measurement and recording for quality conformance inspection
Color distance measurement
Measurement of absolute color spaces
Colour spaces: XYZ, Yxy, Delta-E COE L*a*b*, Delta-E CIE L*u*v*
Spectral range: 400. 700 nm
Simple, 4 button menu control
Non-volatile memory for 1000 color readings and for 100 color readings including remission spectra
Backlit graphic screen
Comprehensive data processing professional software
|
|
Jenway manufacture both portable and laboratory colorimeters.
The model 6030 (shown) uses 'drop-in' industrial filters for wavelength selection while the 6051 laboratory model has an in-built filter wheel.
Results can be displayed in absorbance, Transmittance or Concentration units.
Both models are very easy to use and supported by a full range of cuvettes and industrial sampling accessories. |
|
| Colorimeters use sensors that simulate the way the eye sees color but unlike the human eye, they can assign consistent measurement parameters to every color, no matter what the ambient conditions happen to be. For color quality control there is nothing more important. Konica Minolta’s portable colorimeters measure the color of liquids and beverages; foods like pasta, wheat, flour, and fish; petroleum and chemicals; ceramics; textiles and plastics. Accurate, repeatable, and with excellent inter-instrument agreement, Konica Minolta colorimeters are ideally suited for high-volume use in both production and laboratory applications. |
|
| The CO 7500 is a value for money instrument that has been designed for use in educational establishments including sixth form colleges, secondary schools, technical schools and colleges. With a large, uncluttered, digital display and simple push button controls, the instrument is ideal for students. The unit is compact and robust enough to withstand the rigours of the teaching environment, and is available in mains only or mains /internal rechargeable NiMH battery versions. The CO 7500 is easy to use. The eight professional filters - 440, 470, 490, 520, 550, 580, 590 and 680nm - are encased in an integral filter wheel and the wavelength required is obtained by rotating this until the relevant, colour coded, number is visible in the indicator window. The ergonomic design makes this very convenient, and filters cannot be accidentally lost or damaged. With only five buttons (on/off, reference and test, convert between Absorbance and % Transmission readings and kinetics), the instrument is ideal for beginners. When used in kinetics mode - to study rates of reaction, for example - the CO 7500 takes readings approximately every second and these can be sent to a chart industrial recorder (via the analogue output) if required. Alternatively, the results could be downloaded to an Excel spreadsheet for graphing and other manipulation using the appropriate accessories. The samples can be measured in either standard 10mm pathlength cuvettes a minimum of 400 µl is required or in 16mm diameter test tubes (adapters for 10/12 mm test tubes are an optional accessory with the CO 7500);. There is a drain hole at the bottom of the cell compartment so that spillages do not affect the Instrument. |
|
The AquaGem water professional test system from Jenway is the easiest to use, fool proof system for water and environmental analysis.
Simply drop in the Intelligent Professional filter Module for your required test and the wavelength and test parameters are automatically loaded.
Follow the simple step-by-step instructions to prepare your sample, insert and measure.
It really is as simple as that
All results are stored in the internal memory and can be downloaded to a PC using the software included.
Battery or mains operation (both included) and no lamps to replace.
Thirty-eight test kits currently available and more to come... |
|
This top-of-the-range multi-parameter photometer can save you time and money. If you need a simple, but professional meter measuring the most important constituents of water, especially in pools and spas, then the HI 93101 has been designed for you.
The professional housing of the HI 93101 has been designed to perfectly fit into the palm of your hand.
The meter weighs less than 300 grams and has a long professional battery life, ideal for spot checks. The microprocessor gives a low battery warning and shuts off the meter after 10 minutes.
HI 93101 measures bromine, cyanuric acid, iron, iodine, pH, free chlorine and total chlorine.
|
|
| The COLORTEST II illuminates the sample with monochromatic light from a semi-conductor source. A photo-receiver measures the amount of light reflected by the sample. The mean value of a whole series of measurements is calculated and displayed by electronic circuitry. |
|
The MELOT-TC is a system which is adjusted on a very high and absolute color-accuracy for the parallel test of color and intensity of self-luminescent objects in the visible area of light. With this modular system, it is possible to test 1 up to 961 measuring points in parallel. Disturbances through environment light are automatically compensated. As a stand-alone version the color and intensity of the test objects can be separately parameterised and evaluated. The measurement time for e.g. 31 objects depends on intensity and lies between 0,3 and 1,2 seconds for 31 objects. In use of WIN32 DLL by serial interface there is an additional output of measuring data in x, y, Y as well as the dominant wavelength and colortemperature.
Main characteristics of the system:
Parallel test of self-luminescent objects for their color and intensity
Output of measuring data in x, y, Y
Wavelength 400-700 nm
Spectrum resolution to 1 nm
Resolution 20 Bit
Dynamic > 140 db
12 amplification levels
Variable interfaces I/O and serial
Optimised range from 410 to 650 nm
Temperature compensation within the range from 20-55 degrees °C
|
|
Product Features:
- Swiss-engineered i1Display chromameter
- i1Match Software with Easy Mode monitor profiling
- Before and After calibration comparison
- Customizable recalibration auto-reminders
- Push Button calibration for leading industry professional displays
- Removable light head for ambient measurements
- i1Share software for creating, evaluating and communicating color
- Interactive training modules and Digital Pantone Library
- Easy upgrade path to i1Display 2 |
|
| Orion AQUAfast® II colorimeters offer the ultimate in ease of use and have many features such as a simple three-button user interface which ensures error free readings. They are designed for simple-to-use single parameters methods and are ideal for field or laboratory use. |
|
The answer to more demanding and non-standard colorimetric applications. Again built using the unique modular approach, the ADI 2019 is for single streams (external multi-streaming possible) and is available in Heavy Duty format plus a Special version for applications requiring absolutely precise reagent additions
(±0.2% error). The Professional analyzer is also available in stainless steel housing |
|
| Konica Minolta Chroma-Meter have a world-wide reputation for easy and fast colour difference measurement in a very wide field of applications. Especially in the Ingredients-, Food and Chemical industry, the ruggedness and ease of use have led to their reference status. The CR-400 series feature many enhanced functions compared to the previous series maintaining full data compatibility. |
|
CIELAB Color Checker PR0086-S
With the system CIELAB Color Checker PR0086-S concerns it a contactless on-line color measuring system, which is adjusted on a high absolute color accuracy.
Technical data:
Supply voltage 24V DC
Interface R-S 485
Absolute accuracy ~1,6 dE (on the average)
Relative accuracy smaller +-0,5 dE (between the systems)
Optimal work distance 70mm (CIELab)
Measuring surface 70mm with 70mm work distance measurement frequency ~10Hz
Lighting integrated LED´s
Temperature compensation 10 to 55 degrees
Measuring procedure difference measurement
WIN32-DLL
Expenditure CIELab, Chromaticity and tri stimulus by communication.
Dust shield air connection 2mm |
|
| ... products without technical information |
| |
| Konica Minolta Chroma-Meter have a world-wide reputation for easy and fast colour difference measurement in a very wide field of applications. Especially in the Ingredients-, Food and Chemical industry, the ruggedness and ease of use have led to their reference status. The CR-400 series feature many enhanced functions compared to the previous series maintaining full data compatibility. |
|
CIELAB Color Checker PR0086-S
With the system CIELAB Color Checker PR0086-S concerns it a contactless on-line color measuring system, which is adjusted on a high absolute color accuracy.
Technical data:
Supply voltage 24V DC
Interface R-S 485
Absolute accuracy ~1,6 dE (on the average)
Relative accuracy smaller +-0,5 dE (between the systems)
Optimal work distance 70mm (CIELab)
Measuring surface 70mm with 70mm work distance measurement frequency ~10Hz
Lighting integrated LED´s
Temperature compensation 10 to 55 degrees
Measuring procedure difference measurement
WIN32-DLL
Expenditure CIELab, Chromaticity and tri stimulus by communication.
Dust shield air connection 2mm |
|
|
|
