|
|
Automatic compressed air cleaning filters
Cartridge filters
Bagging filters with polypropylene bags
Self-cleaning filters with closed-circuit storage of waste in collectors
|
|
|
|
|
|
Micro Air® dust collectors are engineered from the ground up with innovative design, and features that provide what counts most in a dust collector: functionality. From fine dust to coarse particulate, we can help make your plant a cleaner and a more friendly work environment.
Micro Air® dust collectors utilize cartridge filtration and are available in a large range of configurations up to 24 cartridge models. All are sized and rated for the proper air-to-cloth ratio to solve a wide variety of applications such as weld smoke, powder dust, grinding dust, paper dust, etc.
Key to our models is a revolutionary new cleaning system called Roto-PulseT. This is an on line system that continually cleansthe filters with a revolving, compressed air driven, tube. As air enters the tube, the force of the pulse causes the tube to rotate. While spinning, air exits the pre-drilled holes in the tube. The result is that air hits the entire inside of the cartridge, pulsing dirt particles away from the filter for a much more efficient cleaning cycle.
|
|
GLA-5000 Membrane Disc Filters
Inherently low ash membrane ideally suited for multiple NIOSH analytical methods
Assure gravimetric stability. Low moisture pick-up and low tare weight.
Low ash. Provides interference-free silica determinations.
5 µm pore size meets NIOSH and OSHA requirements.
25 and 37 mm sizes are ideal for use in Pall Life Sciences Air Monitoring Cassettes.
Excellent membrane choice for sampling airborne metals, silica, and dust.
Filter Media
Polyvinyl chloride (PVC)
Pore Size: 5 µm
Typical Air Flow Rate: 53 L/min/cm2 at 0.7 bar (70 kPa, 10 psi)
Maximum Operating Temperature %u2013 Water: 52 °C (125 °F)
Gravimetric Stability: < 0.5% after 24 hr at 48% relative humidity at 50 °C (122 °F)
Ash Content: < 1%
Typical Aerosol Retention: 99.94% 0.3 µm (DOP) at 32 L/min/100 cm2 of filter media
|
|
|
|
|
|
HERDING®-sinter plate filter for surface filtration grant clean gas values of < 1 mg/m³, even with dusts of D50 < 1µm. The matrix consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. The HERDING®-sinter plate filters are extremely stable in structure, rigid, water resistant and only need low-maintenance. The average useful life of a Herding ® filter can even exceed 10 years.
HERDING® sinter plate filters show a very high efficiency of separation and environmental compatibility. The filters can be recycled without any problems, no toxic waste has to be disposed off.
By using these filter elements in HERDING® HSL-units there is an optimum combination of positive attributes like: compactness, optimum flow behavior, ideal dust emission and an extensive operational safety, resulting from the rigidity of the matrix and of no wear and tear against abrasive media. At regular intervals or at pre-determined differential pressure the filter elements are cleaned on-line by a jet-pulse.
The filter elements are fixed only by a single screw – which makes maintenance easy and saves times. On request antistatic or even special design, e.g. for using cooling lubricants or aerosoles are possible. HERDING®-DELTA-filter are future-oriented; already today they meet what tomorrow’s environment and legislation will require. So in fact the separation efficiency shows a much better value than required by the BIA-certificate, regarding dust classification M.
|
|
|
In a dust removal system, the filter cartridges are essential to ensure the efficiency of the entire system. They therefore need to have special features such as: A high filtering capacity to ensure maximum separation potential and in order to comply with even the most stringent standards, where required. A high degree of permeability, which translates into reduced pressure drops and therefore high energy saving potential. Clogging occurs infrequently, thereby guaranteeing a long working life and reduced operating costs.
|
|
A broad choice of filter cartridges appropriate to each one of your installations.
Various types of filter media adapted to your type of industrial application.
To preserve the work environment of your installation and to assure one optimum lifespan of your spare parts, we advise you to replace your cartridges every 2000 hours.
It is imperative to replace the whole of the cartridges of the same filter.
|
|
|
|
|
|
|
U.S. Air Filtration is able to assist you with replacement cartridges for all major dust collector manufacturers. We stock and have available over 100,000 different types of filters elements and cartridges for industrial applications. Our products include both OEM type filters and after market units which, in most cases, offer superior performance at a greatly reduced cost. We offer a complete line of replacement and custom designed dust collector cartridge filters to fit most manufacturer dust collector cartridge filter housings. Our stock includes virtually every type of fiberglass throwaway HVAC type filter (including custom sizes), pleated type filters for all applications including micro-biological, and high efficiency particulate filters (HEPA) of all sizes ad materials. We can provide replacement elements for Pall Pneumatic Products and most other filter housings (air, water, hydraulics, specialty gases). Also available are intake filters for compressors including Ingersol Rand, sullair, Quincy, Gardner Denver, Atlas Copco, etc... We also have dust bags and cartridges for all types of dust collectors, including Donaldson, Torit, and others. We will work with you to deign special dust bags for specific applications and chemicals. In all locations and climates, U.S. Air Filtration dust collector cartridges offer you reliability and dependability in the most demanding installations. Whether you are in the power generating, cement, welding, powder coating, wood working, or pharmaceutical business, we have a cartridge for you.
|
|
Filter Bags
Pulse-Jet Bags
Standard Filter manufactures pulse-jet and plenum pulse filter bags. These bags use support cages to allow air flow from the exterior of the bag and exiting through the interior.
Shaker Bags
We provide a wide variety of filter bags for use in shaker type collectors. We manufacture bags from wovens and shakerfelts. Standard Filter's engineering department can recommend the media that will give you the performance you expect from your shaker unit.
Reverse-Air Bags
A wide variety of reverse air bag types can be designed and manufactured. Typical top designs are strap top, loop top, cord top cuff, compression band tops with steel caps or grommet top bags. Bottom designs can be raw edge, cuffed, compression band or beaded cuff.
Welded Seam Bags
Needle holes in the vertical seam of a filter bag can be a conduit for fine particulate bleed through. In order to give you the most efficient filter possible, Standard Filter can manufacture one piece welded filter tubes.
|
|
U.S. Air Filtration understands that it can be a daunting task to select the correct filter bag / bag filter for your industrial baghouse needs. Whether you are interested in improved filter performance, faster deliveries, a "quick quote", or have a question about how you can maximize effectiveness of your existing filter bags.
U.S. Air Filtration warehouses stock common dust collector bag filters, envelope filters, and cartridge filters in order to best serve our customers. In addition, we offer a complete line of replacement and custom designed bag filters to fit all manufacturer filter bag housings. We intend to be your single source supplier for all of your baghouse dust collector, parts, and bag filter needs, and pride ourselves in our ability to bring true quality and savings to our customers, helping them to run their businesses more efficiently
|
|
Element/Cartridge Filtering
CAMCORP supports a full line of element/cartridge filters to meet the simplest to the most complex applications. State-of the-art filter media is made into tubular pleated filter cartridge elements, in a wide choice of pleat spacing, diameters and lengths.
CAMCORP's proprietary
Poly-El pleated polyester element is a true champion in these tough, new environments. Made of a 100% spun-bond media, it has a number of advantages over paper and felt:
- Higher flow capacity for a given length.
- Higher efficiency.
- Washable with medium pressure water.
- Saves height and floor space.
|
|
Suitable for the filtration of fine dust type in gas turbines, compressors, shot blast, tobacco, pulverized coal ash, floating, pigment, wood dust collection.
- Imported cellulose fiber or synthetic fiber for base media
- Excellent filter efficiency
- Wide pleat spacing, great filter surface
- Electrochemical or stainless steel plate top and bottom, no rust
- Perforated zinc galvanized metal inner core, allows good airflow
- Specialty chlorine rubber gasket to ensure airtight sealing
- Applicable temperature: 65°C—135°C
|
|
|
Allied is the western Canadian representative of dust collection filter bags for Albarrie Canada Ltd. Allied’s Parts Department will specify the bag material and style for specific application. Certain common bag sizes are kept in inventory for emergency supply. Special solutions are offered for difficult conditions such as high temperature, chemical composition and high moisture situations. Albarrie's continuous research and development efforts allow us to offer many unique fabric combinations for effective filtration in a wide variety of challenging applications.
|
|
|
Many allergists recommend high performance electrostatic air filters like the Dust Fighter 90 to reduce patient's exposure to airborne irritants. Breathing clean air can be a significant factor in a patient's well-being. By trapping dusts, pollens, molds, and animal dander as air circulates through the filter, the Dust Fighter 90 electrostatic air filter helps reduce your exposure to these symptom-causing allergens. This often means you breathe easier and have fewer symptoms.
|
|
|
The Dust Fighter 95 electrostatic air filter has set the benchmark of quality that all filters strive to meet. Typical fiberglass throwaway filters can trap only 5% of pollutants. And ordinary electrostatic air filters sold through media and discount outlets trap only 80%. The Dust Fighter 95 is the most effective tool for eliminating 95% of common household pollutants which can harm you, your family, and your heating and cooling system.
|
|
Allergy Gold®
Breathing airborne pollutants often triggers allergy, asthma, and hayfever symptoms. As house dust, mold, and pollen are captured by the Allergy Gold, patients generally breathe easier and have fewer symptoms. Improved sleep patterns and a sense of well being are additional benefits. Having an Allergy Gold installed in a well maintained central air system can result in a cleaner, healthier indoor environment.
|
|
Mikro-Pleat™ Pleated Filters
Mikro-Pleat pleated filters combine the advantages of both traditional pulse-jet filter bags and cartridge filters. Mikro-Pleat pleated filters can improve the performance of your existing baghouse by increasing the effective cloth area.
Application Versatility
Mikro-Pleat pleated filters are more resistant to temperature, moisture and abrasion that other filter cartridges. In fact, they are even washable in some cases, allowing complete cleaning of the filters to avoid collected product contamination.
Typical applications where Mikro-Pleat pleated filters are used include:
- Foundries
- Paint and Pigments
- Chemicals
- Pharmaceuticals
- Cement
- Toners
- Food
- Metals
- Alumina
|
|
|
U.S. Air Filtration can provide dust collector filters for all types of air filtration systems. A pleated bag filter is a bag made of a length of filter media folded into numerous pleats and shaped like a cylinder. The pleats are made such that the outer diameter of the pleated bag matches the outer diameter of a regular cylinder filter bag. The filter media is fitted to the bottom end cap and top sleeve arrangement and the bag cap is attached. The spacing of pleats is normally kept at 2-3 times the area of cylindrical bags which gives it that much extra filter media for the same space consumed.
|
|
Wire Cages
Standard Filter is a supplier of dust collector cages as well as filter bags. We provide a wide range of configurations to best fulfill your needs. Cage constructions, consist of 10, 12 or 20 vertical wires. The horizontal ring spacing on the cage can be 4", 6" or 8".
If plenum height restrictions are a problem, two piece cages are available.
For areas where moisture or acid corrosion are present Standard Filter provides a range of materials.
Finishes
- Carbon Steel
- Galvanized Steel
- 304 Stainless Steel
- 316 Stainless Steel
|
|
| ... products without technical information |
| |
EMV-Filter Guard
Advantages
Finger guard, dust cover and EMV-filter
Changeable filter mat
Simple, solid mounting
Attractive and practical design
Features
Dust cover for fans from 40 mm up to 120 mm
Protection class IP30 (45ppi)
Changeable filter mat (EFxxx)
EMV-filter (retrofitable)
|
|
|
|
see the results for the following category : 
