|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
Dalmec offers a range of tooling heads for the “weightless” handling of electrical household appliances.
Simple to use, they allow the operator to move the electrical household appliances quickly, accurately and safely throughout the working area.
These manipulators have been custom-built, with specially adapted design, dimensions and picking systems to suit the specific requirements of the users and the various environmental conditions available.
|
|
The Roto-Max was designed from the ground up with the operator in mind. The Roto-Max electric hydraulic work positioner places the load at the operator to determine where he or she would like the work load positioned.
t doesn't matter how short or tall the individual is since the operator determines the most comfortable working height. The Roto-Max allows complete flexibility to do the ergonomically safest job with maximum efficiency.
Whether the load is one pound or 3,500 pounds, the positioner height does not change until the individual wants it to change.
With a lowered height of only 6.5", an operator has easy access to the top layer of product. The raised height of 32.5" (plus pallet height) is ideally suited for most applications.
The 43" diameter top rotates easily, thus giving the operator access to product without having to stretch or walk around.
The high performance electric 1 & 1/2 hp motor runs on a standard 20 amp 115 volt single phase circuit.
Roto-Max has a capacity of 3,000 lbs. with a 14 second lift speed (RTMX-30). The high speed model (RTMX25HS) has an 8 second speed and 2,500 lbs. capacity.
A magnetic backed control box is standard and a foot control siwtch is available as an optional item.
|
|
LAWECO guaranteeing their customers 'short notice' deliveries within a maximum of four weeks as from January 2002. Not only has the price level been kept unchanged for the majority of products, but quality and safety further improved. This holds especially true for the optimised maintenance free roller bearings. The exclusion of the less costly bush bearings entails a significantly longer operating life and a higher degree of utilisation. The self-contained base frame of the lift table does not require subsequent grouting, thus offering an unrivalled quality standard with its torsion resistant frame construction
LAWECO supplies the scissor arms exclusively of solid material instead of frame sectional steel in order to improve the stability and robustness of the lift tables even more. Freely adjustable limit switches leave the operator with more flexibility and permit him to universally use the lift table within its useful stroke. The maintenance supports are designed for the individual maximum load. The comprehensive installation kit, comprising of dowels, setting screws, shims etc. is included in the price. The li
|
|
|
Presto Lifts offers an unmatched selection of lift table styles, configurations and capacities. In addition to our standard product offering we routinely create custom modified units to suit special requirements.
|
|
Genie Scissor GSTM Lifts GS-4390 & GS-5390
Large platform with durable diamond-plate aluminum flooring. A single 60 in (1.52 m) multi-position slide-out extension deck, on the front of the machine, comes standard. A second 48 in (1.22 m) slide-out extension deck, on the rear of the machine, is available as an option.
Rear platform railing can be removed for easier loading and unloading of materials.
Slide-out engine tray allows easy access to components.
Automatic leveling hydraulic outriggers are standard on the GS-5390 RT, optional on the GS-4390 RT.
Standard Features:
GS-4390 has 49 ft (14.9 m) working height and GS- 5390 RT has 59 ft (18 m) working height
1,500 lb (680 kg) load capacity
Positive traction-controlled four-wheel drive
50% gradeability
Proportional drive
Two-speed lift functions
Troubleshooting diagnostics
Two self-closing entry gates
Foam-filled tires
AC wiring to platform
Descent alarm
Tilt sensor with an audible alarm
Horn
Hour meter
Genie Scissor GSTM-1530 & GSTM-1930 Lifts
The solid steel deck platform has a slip-resistant surface.
Heavy duty tubular steel guardrails maximize durability. Telescopic end rail can be raised to accommodate large loads.
Lubrication-free, service-free pivot points.
Built-in lanyard attachment points.
The ergonomic Joystick Controller operates from the platform or the ground.
Low noise level allows operation in quiet work environments.
High angle steering provides excellent maneuverability.
Swing-out battery box and power module allow easy access to componentry. Variable speed motor extends battery and motor life by using only the energy needed to do the required work. On-board troubleshooting diagnostics notify the operators of possible fault conditions.
Standard Features
GS-1530 has 21 ft (6.5 m) working height and GS-1930 has 25 ft (7.8 m) working height
39 in (1 m) roll-out platform extension
Compact 30 in (76 cm) width
600 lb (272 kg) lift capacity for the GS-1530 and 500 lb (227 kg) lift capacity for the GS-1930
Compact design
Automatic 25 amp battery charger
Proportional controls for lift and drive functions
Multiple disc brakes provide smooth deceleration
Drive speed interlock limits speed while elevated
Emergency stop at both platform and ground controls
Manual platform lowering valve
Manual brake release
Pothole guards
Non-marking tires
AC wiring to platform
Tilt level sensor with an audible alarm
Beeper horn
Hour meter
Standards Compliance:
ANSI/SIA A92.6
CSA CAN3-B354.2-M82
CE compliance option
AS 1418.10
|
|
The HAULOTTE electric and Rough Terrain Electric scissor lifts offer :
- from 6 to 12 m working height
- an important working area (platform size up to 3.70m x 1.50m)
- a high autonomy (powerful batteries)
This all-purpose models are very adapted for congested areas.
|
|
Indoor use.
Electric front wheel drive motors.
Negative electromagnetic parking brakes with electric disengagement.
90° electric steering.
Manual platform extension 1,4 m.
Manual emergency lowering device.
Cylinder holding valve.
Heavy duty traction batteries 24V – 250Ah / 300Ah (C5).
Audible motion alarm, horn, hourmeter.
Inclinometer with motion blocking device and alarms.
Mechanical wheel drive release for emergency hauling.
Cushion non-marking tyres.
Electrical scissor protections.
Pothole protections.
Battery control system with low-voltage cut-out protection.
Fold down railings.
Overload sensor.
CE - EN 280 marking.
220-V cable with plug, socket and safety cut-out.
Flashing beacon.
Proportional controls with diagnostics.
|
|
|
JLG’s range of electric scissor lifts cover a multitude of applications – both inside and out. JLG offer three ranges of electric scissor lifts – ES series, LE series and LiftLux™ Electric Series – providing a versatile choice to suit all types of applications. Scissor lifts are used where less outreach but more workspace and lifting capacity are required. They are designed to provide larger platform work areas to walk on and generally allow for heavier loads than boom lifts. Scissor lifts may be manouevred in a manner similar to boom lifts but the platform may be raised only vertically, except for a deck extension that provides some horizontal outreach and additional working area.
|
|
Throughout the world you will see JLG electric boom lifts used in warehouses, factories and shopping malls, as well as in outdoor locations. They are designed and engineered for reaching up and over machinery, equipment and other obstacles mounted on floors and for reaching other elevated positions.
All models can be driven up to full elevation. Narrow chassis models enable easy access to narrow aisles and congested work areas. With automatic traction control (ATC), they perform smoothly over uneven surfaces or obstacles and non-marking tyres that are standard on narrow models are perfect for indoor use. On the E600 series, an optional oscillating axle and all-wheel drive improves ground contact and terrain performance.
|
|
The Compact Series DC electric scissor lifts offer Skyjack’s renowned design elements in a compact and versatile package. Equipped with variable speed front
wheel hydraulic drive, and 90° steering, both models in the Compact Series are capable of maneuvering in the smallest spaces.
The SJIII 3215 and SJIII 3219 feature durable steel swing-out trays, providing unrestricted access for easy maintenance and service.
Featuring a 3’ roll out extension deck, these Compact Series models offer work heights up to 25’, and an industry leading 600 lbs capacity, and 25% deability.
|
|
* The UpRight MX19 is the original micro-scissor lift and remains the professional's choice the world over. This ultra-compact, self-propelled machine has an extremely tight turning circle - providing superb manoeuvrability, yet still offering a safe and effective working height of 7.8 metres. Standard features include non-marking tyres and a roll-out deck extension for extra platform space where it is really needed.
* The X26 is a compact, heavy-duty, self-propelled scissor lift that is reliable and easy to use. Highly manoeuvrable, the X26 has a very tight turning radius and excellent, precise one-handed proportional controls, yet still provides a safe working height of up to 10 metres and a payload of 454kg.
* This ultra-narrow self-propelled scissor lift can fit through a gap less than a metre wide, but still retains all the great features of a regular X26, including a safe and effective working height of up to 10 metres and high manoeuvrability. Standard features include roll-out deck extension, hydraulic depression mechanism, non-marking tyres and swing-out service modules.
|
|
MODEL: ECO HLS SERIES (HIGH-LIFT) SELF-PROPELLED STACKER
(Also available with adjustable straddle Legs)
Key Feature: Triple Mast
TWO MODELS: HLS15-45 AND HLS15-53
Capacity: 1500 kg.
Fork Length: 1150mm
Overall Length: 1955mm
Raised Fork Height: 4500mm / 5300mm
Mast Height (Collapsed): 2100mm / 2350mm
Mast Height (Raised): 5070mm / 5820mm
Turning Radius: 1629mm
Drive Wheel: 250mm dia
Travel Speed (With load): 4.5 km/h
Travel Speed (without load): 5.6 km/h
Battery: 24 V / 210 Ah
Lift Motor Power: 2.2 kw
Charger: 12V / 10A
Dead Man Brake
Weight: 915 kg / 955 kg
|
|
Series SL-H : Manual
- Capacities: 2,200 / 3,200 lb.
- Platform Sizes : 21" x 45" to 27" x 45"
- Maximum Height 32"
* Series SL-B : Battery
- Capacities: 1,000 / 1,500 lb
- Platform Sizes : 24" x 26" to 40" x 60"
- Vertical Travel :24" to 36"
- Battery : 12v DV with charger
|
|
MODEL: EBSL10
MANUAL PUSH-BATTERY LIFT SCISSOR LIFT
Capacity: Kg 1000
Raised Height: mm 800
Lowered Height: mm 85
Fork Length : mm 1245
Fork Width: mm 550 / 685
Steer Wheel: mm 180 dia. Polyurethane
Load Rollers: mm 74 dia. Polyurethane
Battery Voltage: V 12 / 125 Ah
Charger : V/A 12V / 10A
Weight: kg 181 kg
|
|
Vehicles from Linde are unsurpassed in safety, handling performance, and ease of use. The best example of this is the Pallet Stacker, which has all operating functions located on the top of the tiller. The innovative Linde Load Control provides heightened precision and sensitiveness.
Compact construction, use of tandem rolling, and powerful drives guarantee high-performance operation on loading docks and throughout the entire warehouse.
|
|
Whatever the goods, whatever the warehouse, you'll find Cat Lift Trucks Power Pallets at the very heart of day-to-day operations.
Compact, powerful, versatile and extremely hard working, our extensive range is sure to meet your needs, whether you require a simple pallet truck for light usage, a versatile and efficient power pallet for medium level shift work or the comfort and power of a stand-on or sit-on truck for more intensive applications, Cat Lift Trucks has the solution for your business.
|
|
Electric and Manual Walkies
5.000lb Capacity Hand pallet Truck
Model Multiple
Type Hand Pallet Truck
Power voltage N/A
Capacity (lb) 5000
Top speed (mph) N/Q
|
|
Walk behind, Step-on, Stand-on, Sit-on, our pallet movers gives operators flexible operation modes. Designed to offer more capacity over various distances and heights, these Electric Pallet Movers are an excellent solution for the compact warehouse.
- Pedestrian Power Pallet Trucks - 1.3 ~ 2.0 ton Capacity
- Stand-On Power Pallet Trucks - 2.0 ton Capacity
- Platform Power Pallet Trucks - 2.0 - 2.5 ton Capacity
- Sit-On Power Pallet Trucks - 2.0 ton Capacity
|
|
Electric Counterbalanced Lift Truck
3.000-5.000 lb Capacity Stand up End Control
Model Capacity(lb) Top speed (mph)
EC15KS 3.000 7
EC18KS 3.500 7
AC20KS 4.000 7
EC25KS 5.000 7
|
|
| ... products without technical information |
| |
|
|