|
|
ADDI-DATA offers interference-free boards for the CompactPCI bus for the industrial measurement, control and automation. The measurement boards are available with 6U or 3U bracket.
- Digital I/O, 24 V
- Analog I/O, multifunction boards
- multifunction counter board: incremental counter, SSI synchronous serial interface, counter/timer, pulse acquisition, frequency , pulse width , period duration, velocity measurement, PWM, BiSS-Master, digital inputs and outputs, ...
- Communication board
- Motion control boards
Protective measures:
- Optical isolation from 500 V to 1000 V
- Separation between analog and digital signals
- Protection against short-circuits, overtemperature and overvoltage
- Input and output filters
- Industry-standard SUB-D connectors
Free drivers for standard operating systems and programming samples.
In preparation: Open Source real-time PAC system in CompactPCI format
|
|
6U CompactPCI Boards
Full line of 6U CompactPCI products supporting PICMG 2.16, IPMI, Hotswap, TPM, System Management. For more information on CompactPCI integrated systems, please click here systems
A complete overview provides Kontron's CompactPCI Product Guide.
|
|
ADDI-DATA offers a large range of
interference-free PC boards for the industrial
measurement, control and automation:
● Digital I/O, 24 V
● Analog I/O, multifunction boards
● Serial interfaces
● Motion control boards
● Counter boards: incremental counter,
SSI synchronous serial interface,
counter/timer, pulse acquisition, frequency,
pulse width , period duration, velocity
measurement, PWM, BiSS-Master,
digital inputs and outputs, ...
Protective measures:
● Optical isolation from 500 V to 1000 V
● Separation between analog and digital signals
● Input and output filters
● Industry-standard SUB-D connectors
● Protection against short-circuits,
overtemperature and overvoltage
Free drivers for standard operating systems
and programming samples.
|
|
|
|
|
|
* 12 bit transient recorder
* 8 synchronous channels with seperate A/D
* Maximum sampling rate 25 MS/s on 8 channels
* Simultanous sampling on all channels
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 8 input ranges between ±50 mV and ±10 V
* Input offset up to ±100%
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* Synchronous digital channels and ABA mode available as an option
The M2I.31xx series allows recording of two, four or eight channels with sampling rates of 1 MS/s, 10 MS/s or 25 MS/s. Due to the proven design a wide variety of 12 bit A/D converter boards for PCI bus could be offered. These boards are available in several versions and different speed grades making it possible for the user to find an individual solution.
As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 2 GSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred on-line to the PC memory or to hard disk.
|
|
* 16 bit A/D converter board
* 8 synchronous channels with seperate A/D
* Maximum sampling rate 1 MS/s on 8 channels
* Extremely high dynamic range
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 8 input ranges between ±50 mV and ±10 V
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* ABA mode available as an option
The M2i.46xx series allows recording of two, four or eight channels with sampling rates of 200 kS/s up to 3 MS/s. These cards offer outstanding A/D features both in resolution and spees for PCI/PCI-X. They are available in several versions and different speed grades making it possible for the user to find an individual solution. The installed memory of up to 2 GSample can be used for fast data recording or sustained data streaming. The enhanced FIFO engine is capable of streaming even 8 channels with 3 MS/s sustained to memory or hard disk.
|
|
|
|
|
|
* 12 bit transient recorder
* 4 synchronous channels with seperate A/D
* Maximum sampling rate 25 MS/s on 4 channels
* Simultanous sampling on all channels
* Up to 64 MSample memory
* 8 input ranges between ±50 mV and ±10 V
* FIFO mode up to 50 MS/s sum samplerate
* Input offset up to ±100%
* Automatic offset calibration
* Synchronisation to multi-board system possible
* 32 Bit PXI / CompactPCI 3U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MX.31xx series allows recording of two or four channels with sampling rates of 1 MS/s, 10 MS/s or 25 MS/s. Due to the proven design a wide variety of 12 bit A/D converter boards for PXI bus could be offered. These boards are available in several versions and different speed grades making it possible for the user to find an individual solution. As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 64 MSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred online to the PC memory or to hard disk.
|
|
|
|
|
|
* 16 bit A/D converter board
* 8 synchronous channels with seperate A/D
* Maximum sampling rate 500 kS/s on 8 channels
* Extremely high dynamic range
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 8 input ranges between ±50 mV and ±10 V
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* Synchronous digital channels and ABA mode available as an option
The M2i.47xx series allows recording of one, two, four, eight or sixteen channels with sampling rates of 100 kS/s up to 500 kS/s. These cards offer outstanding A/D features both in resolution and speed for PCI/PCI-X. They are available in several versions and different speed grades making it possible for the user to find an individual solution. The installed memory of up to 2 GSample can be used for fast data recording or sustained data streaming. The enhanced FIFO engine is capable of streaming even 16 channels with 500 kS/s sustained to memory or hard disk.
|
|
* 16 bit A/D converter board
* 8 synchronous channels with seperate A/D
* Maximum sampling rate 3 MS/s on 8 channels
* Extremely high dynamic range
* Up to 256 MSample memory
* 8 input ranges between ±50 mV and ±10 V
* Continuous FIFO mode
* Automatic offset calibration
* Selectable single-ended or differential inputs
* Synchronisation to multi-board system possible
* 32 Bit CompactPCI 6U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MC.46xx series allows recording of two, four or eight channels with sampling rates of 200 kS/s up to 3 MS/s. These cards offer outstanding A/D features both in resolution and spees for CompactPCI. They are available in several versions and different speed grades making it possible for the user to find an individual solution. The installed memory of up to 256 MSample can be used for fast data recording or sustained data streaming. The enhanced FIFO engine is capable of streaming even 8 channels with 3 MS/s sustained to memory or hard disk.
|
|
|
|
|
|
* Universal digital I/O
* 32 bit data width at 125 MS/s
* configured for input and output
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* 110 Ohm input impedance selectable
* Inputs 3.3 V and 5 V TTL compatible
* Outputs 3.3 V TTL compatible
* Up to 4 GByte on-board memory
* FIFO mode for input and output
* Pattern/edge/pulse width/delay trigger
* Synchronization option available for up to 16 cards
* Options: ABA mode, Multiple Recording/Replay, Gated Sampling/Replay, BaseXIO
The M2i.70xx series of fast digital I/O boards offer a resolution between 1 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). All I/O lines of the card can be programmed for either input or output direction. The on-board memory of up to 4 GByte can be used completely for recording or replaying digital data. Alternatively the M2i.70xx can be used in FIFO mode. Then data is transferred on-line to PC memory or hard disk. The internal standard synchronisation bus allows synchronisation of several M2i series cards. Therefore the M2i.70xx board can be used as an enlargement to analog boards.
|
|
|
|
|
|
* Universal digital I/O
* 32 bit data width at 125 MS/s
* configured for input and output
* 110 Ohm termination software selectable
* 3,3V and 5V TTL tolerant I/O lines
* Up to 512 MByte on-board memory
* continuous FIFO transfer possible
* Pattern edge pulsewidth trigger
* internal synchronisation with analog cards possible
* 32 Bit CompactPCI 6U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MC.70xx series of fast digital I/O boards offer a resolution between 16 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). Every 16 bit / 32 bit of the board could be separately programmed for input or output. The on-board memory of up to 512 MByte could be completely used for recording or replaying digital data. Alternatively the MC.70xx could be used in FIFO mode. Then data is transferred on-line to PC memory or hard disk. The internal standard synchronisation bus allows synchronisation of several MC.xxxx boards. Therefore the MC.70xx board could be used as an enlargement to analogue boards.
|
|
* Universal digital I/O
* 16 bit data width at 125 MS/s
* 110 Ohm termination software selectable
* 3,3V and 5V TTL tolerant I/O lines
* Up to 128 MByte on-board memory
* continuous FIFO transfer possible
* Pattern edge pulsewidth trigger
* internal synchronisation with analog cards possible
* 32 Bit PXI / CompactPCI 3U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MX.70xx series of fast digital I/O boards offer a resolution between 16 bit and 32 bit with a maximum sampling rate of 125 MS/s (60 MS/s). The on-board memory of up to 128 MByte could be completely used for recording or replaying digital data. Alternatively the MX.70xx could be used in FIFO mode. Then data is transferred on-line to PC memory or hard disk. The internal standard synchronisation bus allows synchronisation of several MX.xxxx boards. Therefore the MX.70xx board could be used as an enlargement to analogue boards.
|
|
Board-only configurations that allow you to easily embed intelligence into small spaces and custom enclosures.
|
|
The Wildcat gives OEM designers optional Ethernet connectivity in a low-cost, high-performance single-board computer. These compact boards are rich with the digital I/O, A/D, and D/A designers need for embedded control and monitoring applications, and the Wildcat's compact board allows for easy integration.
Ethernet models are ideal for remotely monitoring and supervising another programmable system or web-enabling new or existing products.
|
|
The Epson fieldbus systems are the ideal connection of an Epson robot with an industrial fieldbus system. No matter if Devicenet or Profibus, the connection of fieldbusses to an Epson controller is completely integrated into the Epson developer surface Epson RC+.
So it is possible to use the high performant fieldbusses.
|
|
|
|
|
|
bc637PCIe (GPS)
GPS Referenced PCI Express Time & Frequency Processor
Symmetricom’s bc637PCIe PCI Express timing module provides unparalleled precise time and frequency to the host computer and peripheral systems. Time is typically acquired from GPS or time code signals such as IRIG B.
Extremely Precise time is acquired from the GPS satellite system or from time code signals provided to the host computer. GPS synchronization provides 170 nanosecond RMS accurate time to UTC (USNO) and enables the bc637PCIe to be an ideal master clock for precisely synchronizing one or more computers to UTC.
Integration of the module is easily facilitated with standard drivers for Windows, Linux, and Solaris that included with the module.
Extensive time code generation and translation are supported. The generator outputs either IRIG A, B, G, E, IEEE 1344, NASA 36, XR3 or 2137 in both amplitude modulated (AM) and DC level shift (DCLS) formats. The translator reads and may be used to discipline the 10 MHz oscillator to either the AM or DCLS format of IRIG A, B, G, E, IEEE 1344, NASA 36, XR3 or 2137 time codes.
The module also has a state-of-the-art DDS rate synthesizer capable of 0.0000001 PPS to 100 MPPS. Three Event Time Capture registers provide a means of latching time of external events. A key feature of the bc635PCIe is the ability to generate interrupts on the PCI bus at programmable rates. These interrupts can be used to synchronize applications on the host computer as well as signal specific events.
|
|
|
|
|
|
High reliability and safety: Full opto-isolation!
This opto-isolated multiport datacom board is the all-rounder among the serial interfaces: Up to 8 ports, RS232, 422, 485 and mixed, rates up to 1 MBaud, additional discrete digital I/O lines and a counter. The ideal solution for your point-of-sales, retail or industrial datacom applications at a fair price.
Highlights
* ME-9000: Non isolation TTL ports.
* ME-9000i: Opto-isolated ports with common ground.
* ME-9000p: Opto-isolated ports with separate grounds.
Features
* 2, 4 or 8 ports.
* Optional breakout cable with 2, 4 or 8 connectors.
* RS232 or RS422/485 ports or mixed versions RS232 + RS422/485 (half of the ports are RS232, other half are RS422/485).
* High-speed transmission rates up to 1 MBaud.
* All handshake lines wired to the connector.
* Versions "i": Opto-isolation of all ports/lines with common ground (CGND).
* Versions "p": Complete opto-isolation of all ports with separate gounds (no
* common GND).
* ESD protection.
* Versions for 3.3 V and 5 V PCI.
* 8 discrete TTL digital I/O lines, 1 counter 16 bit.
* Ideal solution for POS (point-of-sales) and retail applications.
* For use with Windows NT, 2000, XP, Linux.
* PCI Local Bus 2.1 compatible. Plug'n'Play. Available as StandardPCI, PCI-Express or 3 U PXI/CompactPCI versions.
|
|
|
|
|
|
Full opto-isolation!
Do you consider high reliability, high noise immunty and high precision as very important for your application? Then this unique analog output board is a good solution for you. With its complete opto-isolation of all channels it is suitable for industry and lab. The board has high precision 16 bit D/A converters and some sophisticated extras…
Highlights
* 16 bit precision.
* High reliability with full opto-isolation.
* Models with waveform generator.
Features
* 4, 8, PCI also 16 voltage outputs. Range ±10 V (max. ±15 mA per channel). ME-6200 and ME-6300: 1 additional channel 0…50 V.
* All channels opto-isolated, available as:
* ..."p"/"island" channels: Full opto-isolation with no common ground. All individual channels opto-isolated from the PC and from each other.
* ...Opto-isolated outputs with common ground.
* An individual 16 bit high precision D/A converter per channel. Transparent output. Rates up to 500 kHz per channel, independent from system on the channels 1 - 4 of the models with FIFO (ME-6100, ME-6300).
* Automatic adjustment, no potentiometers.
* Waveform generator - ME-6100/ME-6300: One 8 kByte FIFO each on channel 1 - 4 for extended operating modes (generation of waveforms):
* ...Continuous output.
* ...Wrap around/periodic output of data sets from the FIFO under timer control. Periodic signals up to 250 kHz (square signal).
* 16 TTL digital I/O channels, organized as 2x 8 bit ports. Each port programmable as input or output.
* PCI Local Bus 2.1 compatible. Plug'n'Play. Available for the bus platforms StandardPCI or PXI/CompactPCI and with ME-Synapse for Ethernet/LAN or USB.
|
|
|
|
|
|
Models with opto-isolation!
This DAQ board series for professional applications offers a high level of flexibility. You will be surprised about the versatile functions the board offers. Starting with lowcost allround starter models up to highend versions with complete opto-isolation and lots of extra features - you will find the right board for nearly every standard DAQ application!
Highlights
* Models with opto-isolation.
* Models from low cost to high end.
* Open and expandable. Runs with Windows or Linux.
Features
* Up to 32 single-ended/16 differential analog inputs. Models "s": 8 single-ended input channels can also be used with simultaneous sampling. Ranges ±10 V, ±2.5 V, 0...+10 V, 0...+2.5 V.
* 16 bit/500 kHz A/D conversion (PCIe versions: 250 kHz; with ME-Synapse USB: 20...25 kHz). External digital and analog triggers.
* Models "i" A/D section opto-isolated.
* Up to 4 output channels. Range ±10 V. Models with one FIFO per channel.
* 16 bit/500 kHz D/A conversion. External digital trigger.
* Models "i" D/A section opto-isolated.
* 32 digital I/O channels, grouped in 4x 8 bit ports:
* ...Models without "i" TTL level, each port programmable as input or output.
* ...Models "i" 8 opto-inputs, 8 opto-outputs and 2x 8 TTL inputs/outputs.
* Models with timer controlled bitpattern output with FIFO.
* 3x 16 bit counters. Models without "i" TTL level, models "i" opto-isolated. All lines wired to the connector.
* PCI Local Bus 2.1 compatible. Plug'n'Play. Available for the bus platforms StandardPCI, PCI-Express or PXI-/CompactPCI and with ME-Synapse for Ethernet/LAN or USB.
|
|
|
|
|
|
Highlights
* A total of 48 digital channels: Opto and TTL I/O.
* High-drive for levels up to 32 V (optional up to 50 V). Load 700 mA.
* 2 USB versions: MEphisto Opto or combination with ME-Synapse.
Features
* ME-8200A (incl. MEphisto Opto A): 8 opto inputs and 8 opto outputs.
* ME-8200B (incl. MEphisto Opto B): 16 opto inputs and 16 opto outputs.
* Level up to 32 V (option: up to 50 V). Isolation up to 500 V. Outputs source, option "-S": Sink. Load up to 700 mA. Inputs with overvoltage protection/transient diode. Short circuit proof.
* 16 TTL digital I/O lines (2x 8 bit ports), expandable with relays/optoisolation.
* Can be used for monitoring of status changes, with interrupt.
* Bitpattern comparator, 1x or 2x 8 bit. Interrupt on comparison positive (not for MEphisto Opto).
* Interrupt on thermic load (not for MEphisto Opto).
* Any input selectable as interrupt source via mask register (not for MEphisto Opto).
* PCI Local Bus 2.1 compatible. Plug'n'Play. Available for bus platforms StandardPCI, PCI-Express or 3 U PXI/CompactPCI and with ME-Synapse for Ethernet/LAN or USB.
* USB version MEphisto Opto: USB 1.1 full-speed. Robust metal housing. External power supply.
* At the moment MEphisto Opto (USB) not with ME-iDS under Linux.
|
|
16 ports on one board!
This interface board gives you 16 full RS232 ports including all handshake lines. This high package of ports on a single PCI board is possible with two 68-pin VHDC connectors. Modern connectivity accessories convert the VHDC to standard 9-pin D-subs. The ME-9300 can reach transmission rates up to 1 MBaud.
Features
* 16 RS232 ports on a single PCI board.
* 8 ports connected to a high-densitiy VHDC connector.
* High-speed transmission rates up to 1 MBaud.
* All handshake lines wired to the connectors.
* ESD protection.
* For use with Windows NT, 2000, XP, Vista, 98/Me, Linux.
* PCI Local Bus 2.1 compatible StandardPCI version. Plug'n'Play.
|
|
|
|
|
|
DF PROFI II PCI/PCIe/CPCI/PC104+
High performance PROFIBUS DP/DPV1 interface
The DF PROFI II is a high performant PROFIBUS DP/DPV1 board of the newest generation and is available as PCI, PCIe, CompactPCI and PC104+ board. The DF PROFI II PCI interface supports 5V and 3.3V 32 Bit PCI slots, so it can be used in server pcs and workstations without problems. Beside the standard DP/DPV1 PROFIBUS services the board implements useful additional options.
The implemented hardware watchdog allows the electrical switch off of the PROFIBUS interface, that allows the board to be used in redundant DP Master concepts with 2 pc systems.
The process image contains except I/O data and status information a relative time stamp with millisecond resolution.
The DF PROFI II board needs for the data exchange of the process image only round about 1 ms with common I/O data sizes up to 3 Kbytes and stores the PROFIBUS configuration data in a failsafe flash memory.
For the compilation of the PROFIBUS configuration a very powerful and comfortable tool is available. The DF PROFI II board supports beside the popular operating systems Windows 2000/XP and Linux (SUSE, Redhat, Fedora) real-time operating systems like LINUX RT and LabVIEW RT.
|
|
|
|
|
|
Addi-Data presents the new 32-bit digital input/output board PC104-PLUS1500 which has 32 I/O. The PC104-PLUS1500 is equipped with both PCI and ISA connectors on the circuit board. The direct connection to SPS controls is guaranteed because the I/O channels correspond to the industrial standard +24 V for “logic 1”. The input voltage is designed precisely so that the PC104-PLUS1500 switches reliably to „0“ or „1“, even in the case of disturbances. With 0-14 V as “low” and 19-30 V as “high” the ranges are set very high. In order to ensure that the board is interference-free and thus the flawless use in applications, the 32 digital inputs/outputs are isolated up to 1000 V and protected against fast transients, electrostatic discharge and high-frequency EMI.
Two digital inputs are interruptible and thus the main programs are relieved of the standard monitoring and evaluation tasks. In order to avoid undefined states the outputs stay on “status 0” when the PC is started.
The High-Side switch outputs that are available on the PC104-PLUS1500 are designed for inductive loads and PTC resistors, in contrast to the open collector outputs. They work with a nominal voltage of 24 V and an output current of 150 mA and are protected against short-circuit, overtemperature and undervoltage. Additionally, 3 timers or counters are available, whereas Timer1 can work as programmable watchdog for resetting the outputs. A status register that can be read out allows to detect short-circuit or overtemperature.
|
|
|
Advantech is a global leader in plug-in I/O card design and manufacturing, providing a full range of industrial data acquisition (DAQ) and control products which are widely used in industrial and laboratory applications such as: monitoring, motion control, data acquisition, and automated testing. There are six major categories - CompactPCI, PCI-bus, ISA-bus, USB-bus, PC/104 modules, and Motion Control I/O products. With rich wiring terminals and extensive software support, Advantech provides reliable, efficient, and cost-saving industrial solutions. Moreover, Advantech’s DAQ products could simply be bundled with versatile industrial PC chassis, backplanes, CPU modules, flat panel monitors and embedded automation computers.
|
|
|
|
|
|
The interference-free PCI Express boards with numerous protective measures are especially suited for applications in rough industrial environments.
Analog multifunction board APCIe-3121:
- 16 SE/8 diff. or 8 SE/4 diff. inputs, 16-bit
- 8/4 analog outputs, 16-bit
- Optical isolation
- PCI express DMA, programmable Gain
- Trigger functions, timer, watchdog
- 8 digital I/O, 24 V, optical isolated
1- to 8-port serial interface APCIe-7xxx:
- Serial interfaces with modules: RS232, RS422, RS485, 20 mA CL
- Free mode configuration for each port
- with/without optical isolation
- 128-byte FIFO buffer for each port
Multifunction counter board APCIe-1711: for many counting applications on the same hardware base – Programmable FPGA modules
- Functions: Incremental counter, SSI, counter /timer, pulse acquisition, frequency, pulse width, period duration , velocity measurement, PWM, BiSS-Master, …
- Function selection through software
- Optical isolation 1000 V
- Customer-tailored functions
Digital I/O boards APCIe-1532 and APCIe-1516, 24 V:
- 32 or 16 I/O, 24 V
- 15 interruptible inputs
- Reliable switching to „0“ or „1“, even in case of interferences
- Optical isolation 1000 V
- Output current per channel 500 mA
Free drivers for standard operating systems and programming samples.
|
|
|
|
|
|
bc635PCIe (IRIG)
Symmetricom’s bc635PCIe PCI Express timing module provides unparalleled precise time and frequency to the host computer and peripheral systems. Time is typically acquired from time code signals such as IRIG B.
Extremely accurate time provided to the host computer. Integration of the module is easily facilitated with standard drivers for Windows, Linux, and Solaris that included with the module.
Extensive time code generation and translation are supported. The generator outputs either IRIG A, B, G, E, IEEE 1344, NASA 36, XR3 or 2137 in both amplitude modulated (AM) and DC level shift (DCLS) formats. The translator reads and may be used to discipline the 10 MHz oscillator to either the AM or DCLS format of IRIG A, B, G, E, IEEE 1344, NASA 36, XR3 or 2137 time codes.
The module also has a state-of-the-art DDS rate synthesizer capable of 0.0000001 PPS to 100 MPPS. Three Event Time Capture registers provide a means of latching time of external events. A key feature of the bc635PCIe is the ability to generate interrupts on the PCI bus at programmable rates. These interrupts can be used to synchronize applications on the host computer as well as signal specific events.
|
|
This board is an interface board of PCI bus conformity which inputs a digital signal.
The opening-and-closing state of a switch can be inputted.
A maximum of 128 input can be performed on board.
"Attached API function library [API-PAC(W32)] The application software for Windows can be created by the various programming languages which are supporting Win32API functions, such as Visual Basic, and Visual C/C++, by using it.
|
|
FAST400 board
2 high flow serial ports for industry fields
Communication board 1 two-directional parallel
2 serial ports RS232, RS422, RS485, isolated 1200 Veff
Asynchronous transmission
Flow of up to 375 000 bits/s (or 500 000 bits/s with 16 MHz oscillator) for RS422 - RS485
16C550, compatible interface 8250
16 character buffer in emission and 16 in reception
Serial ports run by peripherals drivers integrated within your operating system
Connections:
- Serial Port 1: SUB D25
- Serial Port 2 : SUB D9 or SUB D25 (on an additional plate)
- Parallel port: 1 SUB D25 (internal) or 1 SUB D25 (external) (on an additional plate)
Signals:
- Parametering of the RS mode via a set of switches
- Under RS232: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI.
- Under RS422: TxDa, TxDb, RxDa, RxDb.
- Under RS485: +TxD/RxD, -TxD/RxD.
Addressing:
- Serial ports 1 and 2: compatible COM1/ COM2 or COM3/ COM4.
- Parallel port: compatible LPT1 or LPT2.
Application:
Industrial protocols ModBus, JBus, Uni-Telway ...
|
|
|
|
|
|
The new products are low-profile, RS-232C serial communication boards compliant with PCI Express. The board can expand asynchronous RS-232C serial communication ports on a PC with a PCI Express compliant slot. The board is available in three models different in the number of on-board RS-232C serial communication ports: 1-channel type "COM-1C-LPE", 2-channel type "COM-2C-LPE", and 4-channel type "COM-4C-LPE".
The three new models support high-speed communication at up to 921,600 bps. The bundled driver software can be used for Windows and Linux to recognize the on-board ports as OS's standard COM ports, allowing them to be set as COM1 to COM256. The board has high-capacity FIFO buffer memory: 128-byte transmit buffer and 128-byte receive buffer. The FIFO buffer memory can be adjusted in buffer size for starting data transmission/reception. You can optimize the buffer size for each application, for example by increasing the buffer size to reduce the CPU load or decreasing it to improve realtimeness.
|
|
Introduction
The CP-102E and low profile CP-102EL are 2-port PCI Express boards designed for POS and ATM applications. Moxa's PCI Express boards are a top choice of industrial automation engineers and system integrators, particularly since the boards support many different operating systems, including Windows and Linux. The CP-102E/EL's 2 RS-232 serial ports support a super fast 921.6 Kbps baudrate, and provide full modem control signals to ensure compatibility with a wide range of serial peripherals. In addition, the boards' x1 classification allows them to be installed in any PCI Express slot.
Features
• PCI Express x1 compliant
• 921.6 Kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Low profile form factor fits small-sized PCs Drivers provided for Windows (2000, XP/2003/Vista/2008 x86/x64), Linux 2.4, Linux 2.6 (x86/x64) QNX 6, Windows XP Embedded, SCO OpenServer 5/6, UnixWare 7
• 15 KV ESD protection on the board
|
|
|
|
|
|
UNX series for PCI bus (High speed & specific speed configurable)
Asynchronous communication board 4/8 high flow ports, up to 3,75 Mbps (1)
FIFO of 128 octets on each way for emission or for reception
Mode RS232, RS422, RS485, Power (current) loop 20 mA, TTL
Interface in external metallic connection case
Extra protection against lightning ESD (of more than 22 kV)
Automatic reversal of line under RS485
Driven like standard COM ports
Note 1 :
Standard maximum speed is 1.8 Mbps (29.4912 Mhz oscillator) and can go up to 3.75 Mbps (optional 60 Mhz oscillator).
Other oscillators can be mounted on the board to satisfy communication speed specific requirements.
Connections:
* Link between board and case by reinforced round cable and a vibration resistant link
* Case RS232 : 4 or 8 SUB D25.
* Case RS422 without insulation: 4 or 8 SUB D25.
* Case RS422/ RS485 isolated 3 KVeff: SUB D9 for each channel.
* current loop case 20 mA isolated: SUB D9 for each channel.
* Mode TTL without case: connector MDR 100 points.
* Modular case with mixed interface (RS232, RS422, RS485, fiber optic cable).
Signals:
* Under RS232: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI.
* Under RS422: TxDa, TxDb, RxDa, RxDb.
* Under RS485: +Tx/Rx, -Tx/Rx.
* Under current loop 20 mA: +TxD, +RxD, -TxD, -RxD.
Adressing:
Run by BIOS PCI (switch free).
Operating systems supported:
Windows, Linux & RTLinux.
Applications:
All asynchronous communication applications (Industrial Informatics, Industrial Automation, Access Control, Transport Ticket Machines, Cash dispensers, Point of Sales Terminals, mobiles phones download (GSM/GPRS/UMTS).
|
|
|
|