|
|
|
|
|
|
AirClean Systems Polypropylene Ductless Fume Hoods
AirClean®Systems portable ductless fume hoods remove toxins by filtration while protecting operators and the environment. Solid polypropylene construction with no pre-filtration metal components allows excellent corrosive chemical resistance. Coupled with AirZone™ baffling for proper airflow control, AirClean®Systems ductless fume hoods usher in a new era of quality filtration hood design.
Features:
* AirSafe™ automatic safety controller
* Vertical sliding safety glass sash
* Dual wall construction allows for front mounting of services such as water, gas, or electrical outlets.
FlowSmooth™ airfoil on sash lip promotes laminar airflow
* Polypropylene construction for excellent chemical resistant properties. The result - “NO MORE RUST” which allows for longer service compared to standard metal enclosures
* Wide range of activated bonded carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particle
* Integral vapor-proof fluorescent lighting system
* Available in 110V or 220V AC versions
* No duct required for operation
* Shipped fully assembled
* Meet and exceed relevant OSHA and ANSI Z9.5 standards
|
|
|
|
|
|
AirClean Systems AC600 Series Mobile Ductless Fume Hoods
Our most economical workstation for operator and environment protection. Safely remove toxic vapors, gases, fumes and particulate.
Ideal for:
General chemistry involving small volumes of common chemicals
Tissue staining and processing; e.g. histopathology, cytology
Gluing operations
Solvent cleaning of electronic parts
Soldering applications
School demonstration workstations
Forensic applications - containment of fingerprint powders and chemicals such as ninhydrin and cyanoacrylate
Animal necropsy
Standard Features:
AirSafe™ automatic safety controller
Integral base with deep spill lip
No ducting required
Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49dB
All thermoplastic construction with application specific sash, base and enclosure material
Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
UL, CSA and CE listed
Optional Features:
Custom cart available in fixed 34" height; storage shelf may be added
Built-in polypropylene cup sink and drain
Access panel for electrical cords
Water and gas fittings
Polypropylene base cabinet
chemical disposal pump
|
|
|
|
|
|
TeachAide™ Demonstration Fume Hood from AirClean Systems
A low-cost solution for protection of students, teachers, and the environment during chemistry experiments. The TeachAide™ Demonstration Fume Hood provides exceptional protection from experiments using or generating toxic fumes, vapors, particulate, or smoke.
UL, CSA, CE CERTIFIED!
AirClean® Systems TeachAide™ ductless classroom demonstration workstation is shipped fully assembled.
== Standard Safety Features ==
-AirSafe™ automatic safety controller displays and constantly adjusts blower speed to maintain set face velocity. In combination with airflow monitoring and gas detection, the AirSafe™ automatic safety controller allows you to breathe easier knowing your safety is constantly being monitored.
-Filtration and electronics are located above the work area minimizing the chance of chemical spills entering these sensitive areas.
-The sparkless/brushless motor is post-filter
-The deep base effectively contains accidental spills
-Low airflow alarm warns user both visually and audibly
-Meets relevant OSHA / ANSI regulations and guidelines for fume hood airflow
|
|
|
The ANSI/ASHRAE 110 test is a method of testing the performance of laboratory fume hoods. Kanomax Dif-Kit tracer gas hardware is ideal for use in performing the Tracer Gas test in accordance with ANSI/AHSRAE Standard 110-1995.
|
|
This range uses the very latest Chemcap™ filtration system that make these cabinets not only one of the SAFEST on the market, but also the most cost effective to purchase and to maintain.
Typical uses are in the laboratory are for removal of chemical fumes, vapours and when used in combination with a HEPA filter particulates as well.
Bigneat Recirculatory Filtration Fume Cabinets coupled with Chemcap™ filtration meet the world’s most stringent standards: The AFNOR NF X 15-211 and BS 7989:2001
No ducting or expensive installation costs
Model shown 4002 - 410mm wide
|
|
Mobile Fume Cabinet Model 1004
CHEMCAP™ cabinets are of a ductless design, they have carbon filters for efficient removal of chemical fumes, vapours and when also coupled with HEPA filters remove particulates as well.
They efficiently remove contaminants from the air drawn through the filter system and return the cleaned air back to the laboratory.
1. Can be installed on existing bench or be supplied with a trolley.
2. Quiet Operation
3. Low Air flow alarms and hour counter
4. 410mm, 600mm, 800mm, 1000mm, 1200mm, 1500mm widths are available
5. No ducting or expensive installation costs
Bigneat Recirculatory Filtration Fume Cabinets coupled with Chemcap™ filtration meet the world's most stringent standards: The AFNOR NF X 15-211 and BS 7989:2001
|
|
|
|
|
|
Bigneat recirculatory filtration fume cabinets and fume hoods are ideal for use in education and schools. Fume cabinets for use in teaching need to have excellent all round vision and remove a very wide variety of fumes.
Bigneat offer this cabinet design knowing that the features and use of the very latest Chemcap™ filtration make it the SAFEST on the market and the best too for pupils and staff who need an excellent view of experimental work.
Meet the world’s most stringent standards: Both AFNOR NF X 15-211 Class II and BS 7989:2001
Specification exceeds the requirements of Design Note 29 and Building Bulletin 88, governing the use of fume cabinets in schools.
Multipurpose educational Chemcap™ filters provide excellent filtration efficiencies in excess of 99.9%
No deterioration of filter performance for the duration of the filter life.
Levels of toxic species in recirculated air are well within the recommended occupational exposure limit for pollutant gases having a molecular weight equal to or greater than 30.
KEY FEATURE
Fully Mobile - Because Bigneat cabinets use recirculatory filtration to remove fumes there is no ductwork and it can be moved from one classroom to another.
The unit can be positioned in the best position within the classroom and the teachers demonstration viewed from all four sides.
|
|
Features:
- Economical alternative to metal hoods
- Acrylic door offers unobstructed visibility
- Door opens to three positions for comfort and convenience
- Non-conductive, chemically resistant, corrosion proof
- Baffle directs air flow across table as well as vertically
|
|
We plan and we realize implants for transfer ultrapure fluids, using components of our production.
Advantages for the customers:
* Minor cost of the systems;
* Competence of our technicians and fitters, constantly in contact with our units of planning and production of the components;
* Greater quality;
* Greater service
|
|
We plan and we realize implants for transfer ultrapure fluids, using components of our production.
Advantages for the customers:
* Minor cost of the systems;
* Competence of our technicians and fitters, constantly in contact with our units of planning and production of the components;
* Greater quality;
* Greater service
|
|
AirClean Systems Class I Biological Safety Hood
Constructed from all white seamless polypropylene, AirClean® Systems horizontal laminar air clean benches are the ideal solution for Class I biological safety hood applications.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions
|
|
|
|
|
|
Modular extraction hood: banish welding fumes to the past
Euromate, a specialist in innovative solutions for the extraction of welding fumes, has developed a modular extraction hood. This modular concept provides the best answer to all your welding fumes, cutting and gouging issues, where source extraction is impossible.
Often the extraction of welding fumes in hoods takes place in the middle, not always being very efficient. Some of the fumes will flow out at the sides of the hood – not being extracted at all. Therefore Euromate developed a side extraction framework, optimising the airflow considerably and thus improving the extraction’s efficiency.
As extraction takes place from the sides instead of the middle, more fumes are being extracted from the working area – creating a healthier working environment. Thanks to the well thought-out deflector plate, the airflow is controllable and minimizes sparks to reach the air-treatment system, decreasing the risk of fire substantially.
As the extraction hood of Euromate comes in modular parts, the extraction hood can easily be put together on the spot. It’s not a do-it-yourself kit, but it is not far of! The extraction hood can be suspended from the ceiling or used as a freestanding unit on aluminium legs – according to the environment you are working in. The legs are optional, available in 2, 2.5 and 3 meters and can be cut to requested lengths. The modular design comes as standard with eye bolts. Euromate offers a modular design from 1.5 m² up to 8 m². Expandable with various accessories, such as a lighting fixture incl. fluorescent light, aluminium legs and welding strips.
|
|
AirMax™ Polypropylene Total Exhaust Fume Hood from AirClean Systems
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
Features
* Microprocessor controller - displays real-time airflow
* All Contact Surfaces are constructed of polypropylene - NO MORE RUST!
* Flame-retardant polypropylene interior - Higher temperature working range than fiberglass
* Non-hydroscopic - won’t absorb moisture
* Smoothflow™ air foils for superb airflow performance - Minimizes eddy currents found on other fume hoods
* Large volume spill basin with solid work surface
Optional wet scrubber system is suitable for water soluble gases. Each scrubber is constructed from thermoplastics that are resistant to the gases being scrubbed.
|
|
BIGNEAT Class I cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity.
Built to European EN12469:2000 standard
Key features
Available as ducted or recirculatory filtration models (recirc model shown)
Efficient insulation, sound levels less than 55dB(A)
Internal illumination greater than 750 Lux
State-of-the-art electronic management system with airflow indicators and audible alarms
|
|
BIGNEAT Biological Safety Cabinets meet all the requirements of European EN12469:2000 Standard.
Great features for the comfort of the operator include:
Ergonomic design
Clear well lit view of the working area
Quiet operation
Easy clean surfaces
BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will give years of consistent and reliable service.
|
|
|
The F73A and F73B fume extraction systems provide industrial electronic control of welding and metalworking fumes in work areas. The F73A and F73B clean the air of industrial smoke and oil mists. Either source capture techniques or ambient air cleaning can be used to provide healthier working conditions.
|
|
The intelligent extraction hood!
REVEN® temperature and fume sensors enable perfect control of the exhaust air flow of extraction hoods. In normal large-scale kitchens, one, two or a maximum of three speeds are available to adjust the extraction system to the heat and fume concentration in the kitchen. An automatic control with sensors provides for far more efficient ventilation.
|
|
|
ETRAF Range hoods with filtration for chemicals Large opening of work Hoods of mobile weighings Hoods Out of standard: Alarms flow weak digital Posting of the paramêtres into clear variable Speed of the ventilator Nombreux specific filters Filtres multi-applications Conforme Standard NFX15211 classifies I and II
|
|
Collecting at their point of emission, the smoke and vapors (corrosive or not) emitted at the time of operations in:
Workshops: cleaning of parts to solvents, steeping with the acids, scouring, joining, welding...
Laboratories: chemical handling
ASSETS:
Articulated system: adjustable in height and directional in all directions.
Available on stock.
The connection of the hoods to a plastic centrifugal fan,
type ECN, dedicated to the corrosive vapor extraction, constitutes an effective and durable anti-corrosion unit
ADVANTAGES:
Circular or rectangular hoods
Removable transparent flexible thin straps of containment
All scopes of application: Laboratories, Workshops, any industry
|
|
|
This small hood equipped either with a filter activated carbon or of an ideal filter HEPA for the weighings.
|
|
*THE USER IS PERFECTLY PROTECTED
The air released by the filter contains 100 times less pollutants than the acceptable limit values defined by the official safety authorities (this is to prevent the accumulation of the release of authorized toxics).
VERY LOW SOUND LEVEL
Only 49 dba !!
*TOTAL SAFETY OF THE OPERATOR
Hour counter associated to an alarm designed to remind the user to check every 60 working hrs. the saturation state of the filter.
*CONTINUOUS MONITORING SYSTEM OF AIR VELOCITY
Located in the natural vision field of the user.
FULLY TRANSPARENT DOOR & SIDE PANELS OFFERING A GOOD VISION
allowing for large movements within the enclosure, without opening the front door.
FULLY REMOVABLE SPILL TRAY
can be removed when needed, without dismantling the hood.
|
|
Isles AirCleanTM workstations are engineered and manufactured with attractive contemporary styling and the highest quality construction. Recommended for any Class 100 requirement that does not produce by-products that can contaminate the worker or production area. Available as either vertical or horizontal flow models. These specialized workstations are constructed with cold rolled steel for durability and finished with powder coating for long lasting performance. Standard worksurfaces include cleanroom seal.
|
|
*THE USER IS PERFECTLY PROTECTED
The air released by the filter contains 100 times less pollutants than the acceptable limit values defined by the official safety authorities (this is to prevent the accumulation of the release of authorized toxics).
VERY LOW SOUND LEVEL
Only 49 dba !!
*TOTAL SAFETY OF THE OPERATOR
Hour counter associated to an alarm designed to remind the user to check every 60 working hrs. the saturation state of the filter.
VERY COMPACT SIZE AND IMPORTANT INTERNAL HEIGHT :
only 610 mm - 24 1/5 length
747 mm - 29 4/9 height.
FULLY TRANSPARENT DOOR & SIDE PANELS OFFERING A GOOD VISION
allowing for large movements within the enclosure, without opening the front door.
FULLY REMOVABLE SPILL TRAY
can be removed when needed, without dismantling the hood.
|
|
LABOPUR® fume hoods for chemicals
Following its wide experience with safety cabinets and storage of dangerous products, TRIONYX-leading manufacturer of safety cabinets-uses its entire technical knowledge to design and manufacture its fume hoods LABOPUR®.
Fume hoods LABOPUR® were approved according to the NF X 15-211 standard, by a independant laboratory, MAPE, itself approved by the COFRAQ. The COFRAQ accreditation gives evidence of the technical skills of the test laboratory by the highest european certification organisation.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :