Handheld portable grinders

Rotational speed: 2,100 rpm
Power: 330 W
Diameter: 7.5 cm

Consumption (l/min) 113 BSPT female thread R 1/4 Sound level (dB(A)) 80 Weight (KG) 0.77 Max operating pressure 6,2 bar Applications Stripping, preparation prior to painting and polishing Highlight Lightweight and easy ...

Rotational speed: 4,000, 22,000 rpm
Power: 0.5 ch
Diameter: 3, 6 mm

Consumption (l/min) 113 BSPT female thread R 1/4 Sound level (dB(A)) 80 Weight (kg) 1.00 Max operating pressure 6,2 bar Applications Grinding, milling and sawing Connection Supplied with 3 adaptors: ISO 6150 B; European 7,4 mm; ARO 210

Rotational speed: 12,000 rpm - 55,000 rpm
Power: 110 W - 500 W
Diameter: 10 mm - 50 mm

The fiam straight model air grinding tools represent a range of tools for various applications from grinding, chamfering, grooving, removing materials, sanding, finishing and cutting to brushing, polishing, roughing, etc. These tools ...

Rotational speed: 6,600 rpm - 13,500 rpm
Power: 300 W - 2,300 W
Diameter: 30 mm - 230 mm

Fiam presents angle models of air grinders. They provide highest power, ease-of-use and safety. The models can be used in several applications. Thanks to their safety lever, the risk of unexpected starts is eliminated. ...

Rotational speed: 6,000, 8,500 rpm
Power: 2,350, 2,400 W
Diameter: 180, 230 mm

... meet the widest needs: • straight grinders: with power from 90 to 500 Watts and speed from 12.000 to 100.000 rpm • vertical grinders: with power from 2.350 to 2.400 Watts and speed from 6.000 to 8.500 ...

Rotational speed: 12,000 rpm - 35,000 rpm
Power: 0.3 kW

The G-Series grinder deliver more power and precision for enhanced performance. They are easier to service, which means less downtime for users. And the grinder's ergonomic design makes them more comfortable ...

Rotational speed: 25,000 rpm
Power: 0.3 kW

Featuring lever actuation, the rear exhaust MAX Series Die Grinder comes in angled and straight configurations for maximum versatility. Lock-out levers and ergonomic body safety make these tools a welcome addition to ...

Rotational speed: 20,000 rpm
Power: 0.3 kW

Featuring lever actuation, the rear exhaust MAX Series Die Grinder comes in angled and straight configurations for maximum versatility. Lock-out levers and ergonomic body safety make these tools a welcome addition to ...

Rotational speed: 11,500 rpm
Power: 600 W - 900 W
Diameter: 0 mm - 125 mm

Microprocessor control with soft start, restart protection after power failure, overload protection Anti-Kickback - this shuts down the motor on the disc being blocked Compact, narrow and ergonomic shape Highly efficient ...

Rotational speed: 6,000 rpm - 11,500 rpm
Power: 600 W - 900 W
Diameter: 0 mm - 125 mm

... ergonomic shape Tool-free adjustment of safety guard Lockable slide switch Spindle lock This universal angle grinder is suited for steel/metal surface finishing, for work on the site/renovation as well ...

Rotational speed: 11,500 rpm
Power: 700 W - 1,200 W
Diameter: 125 mm

... ergonomic handling due to inclined side handle Tool-free adjustment of safety guard Spindle lock This universal angle grinder is suited for steel/metal surface finishing, for work on the site/renovation as ...

Rotational speed: 0 rpm - 85,000 rpm
Power: 80 W

... tool for extreme and long-term use. It is nevertheless light and sits snugly in your hand. Due to the high speed of this grinder it creates a very clean pattern, which makes it ideal for fine grinding, milling and engraving ...

Rotational speed: 0 rpm - 55,000 rpm
Power: 60 W

Lightweight, with a proven, low-vibration SRD 355 motor; it ensures high precision and a long operating life. Its lightness and ergonomic form means that you don‘t tire quickly and allows you to carry out delicate deburring. It can be ...

Rotational speed: 0 rpm - 45,000 rpm
Power: 260 W

This high-performance grinder is the improved successor of the proven straight grinder SRD 645.Despite the high speed of 45.000 rpm, it consumes just 260 W of power. This design required a further improvement ...

Rotational speed: 20,000, 22,000 rpm
Power: 410 W
Diameter: 10 mm

RED ROOSTER die grinders are extremely suitable for de-burring applications as well as weld seam finishing and general die grinding applications. The RRG range of die grinders is developed for enhanced ...

Rotational speed: 1,700 rpm
Power: 1.8 kW
Diameter: 125 mm

Robust and powerful - perfect for your grinding an polishing reqirements for small jobs. Easy polishing - grinding - cleaning _______ Features: Softstart and surface speed control Thermal overload protection and LED 125 mm dust collector ...

Rotational speed: 19,000 rpm
Diameter: 58 mm

Depressed center wheel OD 58mm Spindle lock for the replacement of wheel Plastic housing prevents cold hand Built in governor Powerful Motor for fast and efficient grinding.

Rotational speed: 13,000 rpm
Diameter: 100 mm

The depressed centre wheel is 100 mm/4". It has a very new design which can double as a life of the tool. (compared to MAGW-40) It has a very low profile angle head which enables it to feature a very good amount of flexibility. It has ...

Rotational speed: 11,000 rpm
Diameter: 125 mm

NITTO's MYG-50 series inflatable corner grinders feature a depressed center wheel with the outer diameter of 125 mm, rear exhaust, spindle lock for wheel replacement, plastic cold-resistant housing, side handle that can ...

Rotational speed: 60,000 rpm
Power: 0.1 kW

The lightweight and handy air grinders are ideal for both the rough and the fine use. Confined spaces and every 3D-shapes can be processed using various grinding tools and rotary burrs. Professional advantages - ...

Rotational speed: 35,000 rpm
Power: 0.2 kW

The lightweight and handy air grinders are ideal for both the rough and the fine use. Confined spaces and every 3D-shapes can be processed using various grinding tools and rotary burrs. Professional advantages - ...

Rotational speed: 100,000 rpm
Power: 0.1 kW

The lightweight and handy air grinders are ideal for both the rough and the fine use. Confined spaces and every 3D-shapes can be processed using various grinding tools and rotary burrs. Professional advantages - ...

Rotational speed: 20,000 rpm
Power: 0.7 kW

Our small lightweight pneumatic die grinder has a collet for usual grinding consumables. Energy source: Pneumatic Operating pressure: 6 bar Actuation: Lever valve Tool holder: Collet dia. 8 mm Exhaust: Front

Rotational speed: 7,000 rpm
Power: 1.8 kW

This powerful hydraulic grinder with high removal rate, also for underwater work. The maximum diameter of the grinding disc is 200 mm. Energy source: Hydraulic Operating pressure: 140 bar Actuation: Lever valve Tool ...

Rotational speed: 10,000 rpm
Power: 1,250 kW
Diameter: 6 mm

The ideal pneumatic axial grinder at speeds up to 10,000 rpm, with high removal performance. Tool holder for collet dia. 6 mm. Energy source: Pneumatic Operating pressure: 6 bar Actuation: Lever valve Tool ...

Rotational speed: 2,800 rpm - 11,000 rpm
Power: 1,750 W

- Easy to remove the Oxide film, deep scratch, rust on the laser and plasma cutting on the hole, curve, and straight of the plate. - Removing or deburring films such as zinc plating and stainless steel. It is possible to work in various ...

Power: 1,080 W

If do not use the any guide alongside of machine, it becomes a reason of the product breakage or injured operator by the repulsive force of cutting Height Adjustment One-touch Spline Controller - Adjustment Increments Minimum 0.1mm ...

Power: 1,700 W

The GTB -2100-S has a one-touch spline controller for height adjustment. It can be adjusted in minimum increments of 0.1 mm steps. The milling units consist of a single facemill cutter head. It is used with steel, non-ferrous metals and ...

Rotational speed: 60,000 rpm
Power: 75 W
Diameter: 10 mm

OBER grinders incorporate more than 50 years of experience and expertise in the design and manufacture of pneumatic tools. They are renowned for their strength and ideal power-to-weight ratio. The OBER grinder ...

Rotational speed: 24,000 rpm
Power: 135 W
Diameter: 20 mm

OBER grinders incorporate more than 50 years of experience and expertise in the design and manufacture of pneumatic tools. They are renowned for their strength and ideal power-to-weight ratio. The OBER grinder ...

Rotational speed: 26,000 rpm
Power: 150 W
Diameter: 20 mm

OBER grinders incorporate more than 50 years of experience and expertise in the design and manufacture of pneumatic tools. They are renowned for their strength and ideal power-to-weight ratio. The OBER grinder ...

Diameter: 9 mm

The Unitor series of angle grinders is designed to cope with the daily tasks within the tough marine environment. Please note that you must only use Unitor original consumables due to the high speeds of the units and ...

Rotational speed: 22,000 rpm
Diameter: 9 mm

... goggles) and gloves while using the tool. Features Easy and fast deburring of machined parts Small and compact grinder makes it easy to get in to confined spaces fast removing of welding slag Benefits ...

Diameter: 13 mm

ANGLE GRINDER AG-PRO 7 The Unitor series of angle grinders is designed to cope with the daily tasks within the tough marine environment. Please note that you must only use Unitor original consumables ...

Novatek’s 5" & 7" Air Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our powerful air motor and wide assortment of abrasives, allows us to fit a tool ...

... allow for use in industrial,contracting,& automotive applications • Efficient air motor allows for operation using small, portable compressors • Quick change replacement hubs • Effective lightweight design • Integrated ...

Rotational speed: 13,600 rpm

Non-friction speed governor for efficient grinding performance Unique spring-loaded exhaust valve for noiseless, trouble-free operation Vibration absorbent dead handle for less operator fatigue Recommended air pressure: 85 PSI

Rotational speed: 3,000 rpm - 10,000 rpm
Power: 1,600 W
Diameter: 125 mm

Complete engine protection against dust for extended service life Robust, high-performance, high-efficiency motor Slim carter for a comfortable grip Optimal engine cooling for extended service life Aluminium alloy gearbox Dust-tight bearings Anti-burst ...

Rotational speed: 6,600 rpm
Power: 2,400 W
Diameter: 230 mm

Robust, high-performance, high-efficiency engine Optimized engine cooling and ventilation Powder-coated rotor and stator for effective dust protection Rotor protection from abrasive dust Anti-vibration side handle Anti-vibration rear ...

Power: 400 W
Diameter: 25 mm

... operation and enhanced safety: this die grinder is ergonomic with a smaller grip size and it comes with KickBack Control, soft start, and restart protection. Equipment & Application This powerful die grinder ...

Rotational speed: 9,000 rpm
Diameter: 6 in

... Cordless 4-1/2” / 6" Paddle Switch Angle Grinder, with Electric Brake (GAG14). The Makita-built brushless motor along with the 40V max XGT® battery combine to deliver performance that is comparable to a 15 AMP grinder. The ...

Rotational speed: 11,000 rpm
Diameter: 125 mm

Powerful brushless motor delivering corded performance similar to a 800 W grinder Most compact and lightest cordless angle grinder in the the range Safety clutch protects user the from kickback ...

Rotational speed: 20,000 rpm
Power: 372 kW
Diameter: 6 mm

... 90 psi Power: 372 w Free speed: 20.000 rpm Weight: 0,62 kg Length: 188 mm - 7.3 in HIGLIGHTS: • Heavy duty air grinder • Two front bearing • Adjustable side exhaust

Rotational speed: 4,500 rpm - 8,500 rpm
Diameter: 125 mm

... compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop

Rotational speed: 1,350 rpm - 3,750 rpm
Power: 550 W - 800 W
Diameter: 150 mm

Fillet weld grinder for difficult-to-reach spots in metal constructions. Details Flexible use thanks to drive head that can be swivelled without the need for tools. Flat design for corners, angles and ...

Rotational speed: 6,650 rpm - 15,300 rpm
Power: 200 W - 2,500 W
Diameter: 100 mm - 230 mm

Our angle grinder with angle gear - for the scrubbing and leveling of cast-iron parts, steel parts, welding seams, non-ferrous metals of all types and rock, as well as for any other fabrication areas, such as the steel ...

Rotational speed: 12,000 rpm
Power: 1.1 kW
Diameter: 127 mm

... and flexibility Having the right tool system for the job is an essential part of any application. 3M™ Pneumatic Angle Grinders are engineered with the power to make your grinding, blending, finishing and cutting jobs ...

Rotational speed: 7,000 rpm - 29,000 rpm
Diameter: 6 mm - 50 mm

... SS400 (corresponding to ISO E275A) with a thrust of 19.6N, using a ⌀25mm WA60P mounted point. Vs. HiKOKI's GP3V corded die grinder. The values shown are for reference purposes and may vary according to the workpiece ...