|
|
High quality & competitive price:
Low and medium voltage insulators made from epoxy resin with APG technology comply to IEC and GB standards in different colors.
Product range:
- Low voltage insulators
- Medium voltage post insulators for indoor and outdoor application
- Capacitive insulators with sensor for voltage detecting
- Bushings and connectors
We are a ISO9001 certificated company with strict quality assurance system, and we have advanced production and testing equipments to assure the quality of each product.
|
|
Insulation sleeve
Group 018
# Made from nylon-6 (PA-6)
# Colour: natural
# Protects against short circuiting and electrolytic corrosion
# Legally required in several countries
# Also available in assortment box 019
Insulation sleeve
Group 083
# Made from nylon-6 (PA-6)
# Colour: natural
# Frequently applied in electro technical environments
# Prevents electrical corrosion with counter sunk head screws
# Compulsory by law in many countries
# Also available in assortment box (group 019)
# Check our extensive ranges of nylon or metal screws and nuts
|
|
CoorsTek provides custom high-purity, long-wearing alumina custom shapes with or without metallization and specialized brazing and joining for applications including:
- Feed-through insulators
- Headers
- High-power receptacles
- Insulating discs
- Insulator rings and cylinders
- Precipitator products
- Power switches
- Traveling wave tubes
- Vacuum interrupters
- Windows
- Power grid tubes
- X-ray tubes
|
|
|
|
|
|
A Mineral Insulated (MI) Cable is a metallic cable with ceramic powder insulation packed tightly around the inner wires. Insulators for use in Mineral Insulated Cable production go by many names including crushable insulators, swageable insulators, preforms, beads, pellets, cores, or blocks. This is a uniquely engineered product which is designed to crush into a fine powder upon compression by modest forces.
MI Cable is made by stringing ceramic preforms with thermocouple element wires and loading the threaded assembly into a refractory metal sheath. This assembly can then be subjected to a series of drawing operations to reduce the diameter and elongate the part. The end result is a long coil of small diameter cable with a tight packing of ceramic powder to electrically insulate the wires and sheath.
Dimensionally, the requirements are obvious. Tight dimensional control is needed to permit design engineers to adequately predict the finished results. The holes must be properly positioned and accept the wire under all combinations of tolerance limits. The threaded assembly must fit into the sheath in very long lengths. The ends need to be square and smooth to prevent voids which may cause elongation problems.Because the assemblies usually consist of many insulators strung together, length tolerances are not critical, but uniform lengths are easier to use.
|
|
When voltage fails in the network or mains, or in an independent system, power supply will be provided by fuel cells.
Insulation of individual surfaces of a fuel cell from one another, and provision of the required spacing between them is effected by using ceramic spacers. Fuel cells are subjected from the inside to super-extreme thermal, chemical and mechanical loads. Strips and connection components operating under very high loads have been developed by specialists of the FRIALIT - DEGUSSIT Division jointly with the customers.
|
|
Low and medium voltage insulator bodies made from C-110 and C-120 material comply to standard IEC 60672 available in either brown or white glaze. Brown glaze complies to RAL 8011, 8016, 8017.
Moulding techniques of exstrusion and turning ensure tolerance according to DIN 40680.
Product range:
- Low voltage insulators
- Medium voltage insulators:
- Post insulators for outdoor and indoor mounting
- Line post insulators for overhead lines
- Bushings and hollow insulators
Insulators are manufactured to meet current international standards (IEC, DIN, ANSI, ...) and according to client's requirements.
In agreemet with the client, metal parts may be assembled using our cementing process.
The high quality of our products is assured by tests performed by recognised testing centre.
We have gained ISO 9001 certificate guaranteeing the high quality of our produc
|
|
The Carpenter name has been synonymous with excellence in stainless steel. After all, we developed the world’s first free-machining stainless and continue to set new benchmarks in machinability. We also manufacture high-strength and high-temperature alloys, magnetic and controlled-expansion alloys, superior corrosion-resistant alloys and other specialty metals.
Based on a longstanding commitment to research and development, Carpenter continues to set new industry standards in the manufacture of specialty steels and alloys.
These steels and alloys can be made in a variety of forms including billet, bar, wire, fine wire and ribbon, custom shapes, plate and precision strip. To obtain and deliver the high-performance metals needed today, Carpenter utilizes some of the most advanced equipment in the industry, skilled engineering and production staff, and sophisticated quality control procedures.
|
|
Insulators
Electrical insulation of components on the PCB and chassis can prevent electrical shock.
Richco offers a range of plastic transistor insulating sleeves, mounts, rings and pads that will fit most standard transistors, fuses and other electrical components.
Richco's insulating products are suitable for high voltage and high temperature applications in which assembly methods such as wave soldering and potting are used. Products for electrical insulation can be used with screws, pin plugs and receptacles.
|
|
Electrical insulating parts made with SMC insulating plates, glass fibre reinforced epoxy resin plates and other kinds of insulating plates. The insulating parts include underprops, partition walls, insulating screws and nuts.
Adding of silicon rubber ribs onto the insulating underprop parts to increase the creeping distance is possible.
|
|
Our insulation sleevings are either braided or knitted, like our sealing ropes and tapes. They may be coated with synthetic rubbers or resins allowing the design to be varied to meet end-user repuirements. Our thermal insulations are characterised by having excellent insulating properties as well as a high degree of flexibility.
Decades of experience in many manufacturing processes acquired in the production of industrial textiles have resulted in a wide range of thermal insulations which can be reinforced with glass yarns or stainless steel wire, and, where desirable, be coated with silicone rubber to give enhanced mechanical and dimensional stability as well as excellent sealing properties.
|
|
| ... products without technical information |
| |
Salisbury offers a complete line of SALVAR® Composite Insulators. For decades, thousands of Salisbury SALVAR insulators have been installed by utilities worldwide in a variety of environments.
Unibody or Modular design
SALCOR EPDM and Silicone weathersheds
Unibody style Dead End/Suspension insulators, 15kV to 46kV
Modular style insulators, 35kV to 138kV
Tongue & Clevis, Ball & Socket, Ball & Eye,
Eye & Eye, End Fittings
Also available:
- Line Spacers - 15kV to 46 kV
- Line Post Insulators - 15kV to 69kV
- Horizontal and Vertical Mounting; stud base and gain base styles
|
|
|
Trading under the names Raychem, Axicom, Morlynn, Dulmison and Zibo, Tyco Electronics Energy Division offers a comprehensive range of porcelain, polymeric and hybrid solutions for the electricity supply industry. Experience in the design and manufacture of insulators exceeds 80 for porcelain, 30 years for polymeric and 20 years for hybrid products. The manufacturing processes employ some of the most advanced technologies in the field of insulator production. A commitment to quality is evidenced by independent certification of quality systems complying with international standards.
|
|
|
Trading under the names Raychem, Axicom, Morlynn, Dulmison and Zibo, Tyco Electronics Energy Division offers a comprehensive range of porcelain, polymeric and hybrid solutions for the electricity supply industry. Experience in the design and manufacture of insulators exceeds 80 for porcelain, 30 years for polymeric and 20 years for hybrid products. The manufacturing processes employ some of the most advanced technologies in the field of insulator production. A commitment to quality is evidenced by independent certification of quality systems complying with international standards.
|
|
|
Trading under the names Raychem, Axicom, Morlynn, Dulmison and Zibo, Tyco Electronics Energy Division offers a comprehensive range of porcelain, polymeric and hybrid solutions for the electricity supply industry. Experience in the design and manufacture of insulators exceeds 80 for porcelain, 30 years for polymeric and 20 years for hybrid products. The manufacturing processes employ some of the most advanced technologies in the field of insulator production. A commitment to quality is evidenced by independent certification of quality systems complying with international standards.
|
|
| ... products without technical information |
| |
Customers around the world continue to rely on Bivar’s manufacturing and design strength when it comes to Optoelectronics (standard and custom) and Assembly Hardware.
We’re evolving to meet the increased demand for Solid State Lighting (SSL) with the introduction of our directional lighting series that addresses a growing range of industrial markets and applications.
|
|
|
|
see the results for the following category : 
