Lasers

171 companies | 1284 products
Lasers
  • Category
  • What’s new?
    Submit
  • Optical cavity
    Submit
  • Wavelenght
    • min.
      max.
    Submit
  • Pumping type
    Submit
  • Operational mode
    Submit
  • Spectrum
    Submit
  • Configuration
    Submit
  • Cooling mechanism
    Submit
  • Other characteristics
    Submit
  • Options and accessories
    Submit
  • Technical application
    Submit
  • Product applications
    Submit
  • Function
    Submit
  • Domain
    Submit
picosecond laser - 4 W | APL-4000 Series

Small and robust, the APL-4000 picosecond lasers produces up to 4W of high energy pulses with durations below 10 ps. The laser is based on a hybrid optical amplifier architecture that combines the advantages of fiber laser technology with...

fiber laser / quick-acting / power - 10 W, 1064 nm | APL-X Series

The APL-X is a compact and powerful, hybrid fiber/free space amplified ultrafast laser. With pulses shorter than 10 ps and energies up to...

picosecond laser - 30 ps, 1064 nm | APLQ Series

Robust and affordable, the APL Series laser platform produces high energy pulses with durations below 10 ps. The APL series combines the advantages of fiber laser technology with...

DPSS laser / picosecond - 300 ps | PIRL Series

High pulse energy picosecond laser systems, the PIRL series lasers have 300 ps pulse duration with pulse energy as high as 8 mJ. All diode pumped solid state, multipass-amplifiers...

picosecond laser - max. 500 ps, 1500 - 6000 nm | PIRL series

The PIRL series mid-infrared lasers produce high energy picosecond pulses tuned to fixed wavelengths in the range between 1500 to 6000 nm. These turn-key laser systems are based on diode...

{{productDetail[124495]}}
fiber laser / short-pulse - 532 nm | VPFL-G-20

Applications

Cutting
Deep / Fine Engraving
...

fiber laser / short-pulse - 532 nm | VPFL-G-10

Applications

Cutting
Drilling
Marking
...

fiber laser / short-pulse - 1 060 - 1 080 nm | VPFL-ISP-1-40-50

Applications

Cutting
Deep / Fine Engraving
...

{{productDetail[40743]}}
DPSS laser / far ultraviolet - 266 nm

Specifications
Wavelength: 266 nm
Output power @ 25 °C: 1 - 5 mW
Operating mode: Frequency conversion of Q-switched pulsed laser
Single pulse energy (µJ):...

DPSS laser / ultraviolet - 355 nm, 1 - 5 mW

Specifications


Model: SDL-355-XXXT


Wavelength: 355nm


Output power @ 25 °C: 1 - 5 mW

...

DPSS laser / blue - 457 nm, max. 5000 mW

Scitec Instruments offers cost effective ultra-compact Diode Pumped Solid...

DPSS laser / green - 501 nm

Specifications
Model: SDL-501-XXXT
Wavelength: 501 nm
Output power @ 25 °C: 1-10mW
Operation mode: CW, TEM00
Linewidth: <0.1nm
Beam diameter...

DPSS laser / green - 523 nm

Specifications


Model: SDL-523-XXXT


Wavelength: 523 nm


Output power @ 25 °C: 1-50mW

...

{{productDetail[36367]}}
diode laser / tunable - 370 - 640 nm | DL pro HP

Up to 100 mW single-frequency, tunable output
Standard wavelengths 370 .. 640 nm
Now also with all digital control: DLC pro
With DLC pro even less drift & linewidth
Linewidth < 2 MHz
The DL pro HP diode...

diode laser / tunable - 370 - 1 770 nm | DL 100

Economic, tunable cw diode laser
Widest wavelength selection: 370 nm .. 1770 nm
Output...

diode laser / tunable / tapered amplifier / power - 633 - 1 265 nm | TA pro

The TA pro is the flagship product of TOPTICAs high power tunable diode laser solutions. Its tapered amplifier technology allows...

diode laser / fiber-coupled - iBeam smart PT

COOLDC ultra stable permanent fiber coupling
FINE: Eliminates noise from optical feedback
SKILL: Reduces speckle in your application
Analog and Digital Modulation up to 250MHz
The iBeam smart PT with...

diode laser / blue - max. 405 nm | iWave

Narrow linewidth (< 0.08 nm)
Superior power and wavelength stability
Up to 50mW @ 405nm (10mW @ 375nm)
Compact OEM package
Full...

{{productDetail[29250]}}
CO2 laser / for medical applications - YouLaser CO2

YouLaser CO2 is the State of The Art of the CO2 lasers for Micro-Ablative Fractional Skin Resurfacing and dermatologic surgery.

The high laser power, the advanced and ergonomic scanner handpiece and its...

CO2 laser / for medical applications - YouLaser MT

YouLaser MT is the first and unique laser that due to the proprietary Mixed Tecnology is able to combine the gold standards of 10600 nm and 1540 nm wavelengths in a sequential or simultaneous fractional...

Nd:YAG laser / pulsed - Light series

Light series is the latest multifunctional short and long pulsed laser platform introduced by Quanta System on the market. It is based on the combination of...

Nd:YAG laser / Q-switched / triggered - Q-PLUS series

Q-Plus series provides much higher performances when compared to other Q-switched lasers on the...

Nd:YAG laser / pulsed - DA VINCI LIPO

Da Vinci Lipo is a powerful Nd:YAG 1064 and 1320 nm laser for Lipolysis and Laser assisted Liposuction and gives new real advantages to all the new mini-invasive body reshaping procedures.

This laser delivers...

{{productDetail[61556]}}
femtosecond laser - FEMTOSOURCE™ rainbow™ CEP4

CEP4 is FEMTOLASERS latest generation of Carrier Envelope Phase (CEP) stabilization techniques, continuing the tradition of CEP innovation and success established over the past decade by CEP1-CEP3. CEP4's outstanding quality opens new realms of CEP stabilization:...

Ti:sapphire laser / quick-acting - INTEGRAL™ core™

While Ti:Sapphire lasers occupy the leading position in ultrafast technologies, their dimensions, cost, and complexity have driven users to alternative technolo- gies, at the expense of critical output parameters, e.g., pulse duration,...

{{productDetail[36035]}}
{{productDetail[67592]}}
VCSEL laser - OPV300, OPV310, OPV314 series

The OPV300 / OPV310 / OPV314 series are high performance 850nm Vertical Cavity Surface Emitting Laser (VCSEL). The OPV300 and OPV310 are designed to be utilized for sensing applications as well as air transmission of data. The OPV314 is designed for high speed communication links. The OPV310 / OPV314 combine all the performance...

VCSEL laser - OPV302

OPV302
• 850nm VCSEL technology
• High thermal stability
• Low drive current
• High output power
• Narrow Beam Angle

The OPV302 is a Vertical Cavity Surface Emitting Laser (VCSEL) packaged...

VCSEL laser - OPV315

Features:
• 850 nm VCSEL technology
• High thermal stability
• Up to 2.5 Gbps
• Recommended for multimode fiber applications
• Microbead lens
• Pin out and attenuation options available on request
•...

VCSEL laser - OPV322

OPV322
• 850nm VCSEL technology
• High thermal stability
• Low drive current
• High output power
• Narrow Beam Angle

The OPV322 is a Vertical Cavity Surface Emitting Laser (VCSEL) packaged...

VCSEL laser - OPV380

OPV380
• 850nm VCSEL technology
• High thermal stability
• Low drive current
• High output power
• Flat lens package

The OPV380 is a Vertical Cavity Surface Emitting Laser...

{{productDetail[34232]}}
fiber laser - es FLY

es FLY lasers are based on Ytterbium fiber technology.
They are emitting at a wavelength of 1,06 micron and they allow to get high quality results, both on plastics and metals. To meet the specific needs of each industrial es FLY fiber lasers are available in "continuous...

ytterbium fiber laser - es FLY

es FLY lasers are based on Ytterbium fiber technology.
They are emitting at a wavelength of 1,06 micron and they allow to get high quality results, both on plastics and metals. To meet the specific needs of each industrial es FLY fiber lasers are available in "continuous...

fiber laser / compact - es CODE

es CODE lasers are based on Ytterbium fiber technology.
They are emitting at a wavelength of 1,06 micron and they allow to get high quality results, both on plastics and metals. To meet the specific needs of each industrial, es CODE lasers are available in "continuous mode" or "pulsed mode" with powers ranging...

fiber laser - es CODE

es CODE lasers are based on Ytterbium fiber technology.
They are emitting at a wavelength of 1,06 micron and they allow to get high quality results, both on plastics and metals. To meet the specific needs of each industrial, es CODE lasers are available in "continuous mode" or "pulsed mode" with powers ranging...

ytterbium fiber laser - es CODE

es CODE lasers are based on Ytterbium fiber technology.
They are emitting at a wavelength of 1,06 micron and they allow to get high quality results, both on plastics and metals. To meet the specific needs of each industrial, es CODE lasers are available in "continuous mode" or "pulsed mode" with powers ranging...

{{productDetail[54762]}}
workstation laser - WS series

LasX LaserSharp® workstations differ from our roll-fed or sheet-fed systems in that the material largely remains stationary during processing, instead of being processed while...

workstation laser - XY

The LaserSharp® Workstation XY combines a steered beam laser with an accurate XY positioning system, creating a new standard for high speed performance. What makes this...

{{productDetail[58358]}}
rotary laser / construction / self-levelling / automatic - 150 m radius | ML10x

Fast and Easy Setup - Fully automatic self-leveling allows the operator to setup with just the push of one button. No level bubbles or screws to adjust. Large ±9% (±5 degrees) self-leveling range makes this possible! During work, the automatic self-leveling keeps the beam horizontal, even as the laser is exposed to knocks and vibration. The large LCD...

rotary laser / dual-grade / semi-automatic - 150 m radius | ML 13x

The ML 13x is a semi-automatic Dual Slope Laser with features like the ML 14i except Scanning, Remote Control and adjustment of rpm.

Dual Slope - To use slope simply press the manual button, X- or Y- direction and then enter the slope desired using the Up/Down button.
The ML 13x will start from its level position and tilt the rotor to the entered slope. After achieving the...

horizontal rotating laser / self-levelling / automatic - 60 m / 300' | ML 15i

Fast and Easy Setup - Fully automatic self-leveling allows the operator to setup with just the push of one button. No level bubbles or screws to adjust! Large ±9% (±5 degrees) self-leveling range makes this possible! During work, the automatic self-leveling keeps the beam horizontal, even as the laser is exposed to knocks and vibration.

Rugged...

{{productDetail[61805]}}
workstation laser - 800 x 800 mm | LS5

This LS5 workstation was especially designed for micromachining and precision engraving. Its honeycomb structure and the external enclosure completely isolated from the internal structure ensure a high...

workstation laser - max. 200 W | LS3

This LS3 workstation has been specially designed for marking, welding, engraving, cutting, drilling and micromachining in an industrial environment. Thanks to its modular and flexible design, you can integrate the full...

{{productDetail[56178]}}
tunneling laser - EN60825-1 Class 2

The series FBL91 tunnel lasers are available with 2mW or <1mW power. These are both with 230Vac 50Hz powering. The <1mW version is certified under EN60825-1, Class 2.
The electronic...

tunneling laser - VL102

The VL102 model laser is designed to be installed on a drilling machine used for strengthening in tunnels. VL102 main function is to identify the centre of the projected drilling cone...

tunneling laser - 115/230Vac - 12Vdc

The Halley86 series lasers are the result of Vidalaser’s know-how and are especially designed to build tunnels. Nevertheless they can also be used for civil engineering works.
The Halley86 series lasers are available with 3mW...

{{productDetail[52953]}}
compact laser / line - 637 - 855 nm, 1 - 2.5 mW | RS series

The RS is a line laser engineered by Lanics. It is suitable for use in guide beam, and...

compact laser / line - 637 - 905 nm, 2.5 - 100 mW | MK series

The MK(Ø14) measures Ø14*80mm and has a glass lens with various fan angle of 10,...

compact laser / line - 637 - 905 nm, 2.5 - 50 mW | MS series

The MS(Ø14) Laser Module is ideally designed to provide a high quality functionality...

line laser - 637 - 855 nm, 2.5 mW | GS series

Lanics provide the GS series of laser modules. These tools feature a 120 mm size, and DC...

green laser / line - 532 nm, 8 - 20 mW | KGL series

The KGL series is a line of laser diode modules produced by Lanics. The device's optical...

{{productDetail[36154]}}
rotary laser / construction / self-levelling / automatic - RL-H4C series


Wide Working Range for All Type of Projects
High Accuracy ±10 (±1.5mm@30m, ±1/16in.@100ft.)
...

rotary laser / construction - RL-VH4G2/4DR

You can select from either a Red or Green Beam and either an Interior or General...

{{productDetail[22494]}}
fiber-optic laser / marking - 1064 µm

Active optical fibres laser unit.

- Entirely designed and manufactured by Tullio Giusi Spa using high-quality and effective fibres.

- The release of the laser ray by means of a galvanometric scan-head allows very precise and high-quality markings on metal as well as on a huge range of plastics, with unique colour changes.

-...

Nd:YAG laser / diode pumped / marking - 1064 µm

- Entirely designed and implemented by Tullio Giusi spa.

- Thanks to the laser technology and the system of transmission of the ray by means of scansion head, you can obtain very high quality and precision markings on...

CO2 laser / marking - 10640 µm

A new generation of LASER designed and manufactured entirely by Tullio Giusi spa.
Top-quality American CO2 LASER source for exceptional reliability and long life.
Sealed...

CO2 laser / for integration / marking - 10640 µm

Galvanometric CO2 LASER for simple or automated markings (upon request).

Entirely designed and implemented by Tullio Giusi spa using high quality and efficiency...

{{productDetail[23438]}}
cutting laser / marking - HSL-5000 series

Installable on equipment ranging from repair systems to inspection.
Thanks to HOYAs...

{{productDetail[24344]}}
Nd:YAG laser / diode pumped / marking - BusinessDiode series

The BusinessDiode series of lasers are the all-rounders in the ACI range. Their high energy efficiency and beam quality make them suitable for use both with individual components and in series production lines. The systems are typically...

fiber-optic laser / marking - BusinessFibre series

The BusinessFibre product series of fibre laser systems are suitable for use in time-critical manufacturing processes. Although the main area of application is in metal machining, the system can also be used for marking plastics, ceramics and laser foils. For maximum...

CO2 laser / marking - BusinessCO2 series

The COTwo Marker is a gas laser with a wavelength of 10,600 nm, which allows plastics, glass as well as organic materials to be machined. The solely air-cooled, compact laser system is suitable...

Nd:YAG laser / diode pumped / marking - EconomyDiode series

The EconomyDiode series of lasers are the perfect entry-level systems for small and medium-sized companies with a modest demand for marking. The short resonator allows an outstanding...

fiber-optic laser / marking - EconomyFibre series

The EconomyFibre product series of fibre laser systems are suitable for use in time-critical manufacturing processes. These lasers operate with a fixed pulse width and their main area of use is in the quick marking of metals....

{{productDetail[27496]}}
high-speed laser / tunable - max. 1 570 nm | WSL-1000

The WSL-1000 is a high-speed tunable laser for fiber sensor and OCT applications. The laser’s wavelength can be swept at a frequency of up to 16 kHz across a spectral range of up to 150 nm, with an output optical power of up to 20 mW. The device outputs two λ-trigger (TTL) signals to indicate the exact starting and ending wavelengths of each...

tunable laser - 1 528.77 - 1 563.86 nm | TLS-101

The TLS-101 is a compact tunable laser source for daily test and measurement applications. The laser can be step-tuned across the C-band communication channels with a tuning resolution of 50 GHz in less than 20 ms. The internal wavelength locker assures that the wavelengths or...

tunable laser - 1 528.77 - 1 563.86 nm | TLS-101

The WSL-001 is an OEM high-speed tunable laser for fiber sensor and OCT applications. The laser’s wavelength can be swept at a frequency of up to 16 kHz across a spectral range of up to 150 nm, with an output optical power of up to 20 mW. A power monitoring output is included to indicate the instantaneous laser output power at each wavelength. Other laser health parameters,...

{{productDetail[36256]}}

How to choose this product

laser

A laser is a light source (UV-visible-IR) emitting a focused beam of temporally and spatially coherent light.

Lasers are composed of a gain medium that can be solid (crystal, diode), gaseous or liquid (dye lasers). The gain medium generates and amplifies photon-emission.
Powered by an external energy source, an optical or electronic pumping source (flash lamp, diode, etc.) generates photons through stimulated emission. The photons' narrowly-defined frequency determines the laser's wavelength.

Applications

The numerous industrial laser applications depend on their properties. Lasers generate localized energy that can melt materials (welding, cutting, piercing, ablation, localized fusion, etc.). Operating mode (pulsed/continuous) and limited pulse duration (femtoseconds) further increase emitted energy.

Telecommunications lasers can transmit information over long distances without data loss and without being affected by electromagnetic disturbances. Lasers also are used as highly-coherent light sources in spectrometers.

Technologies

Lasers are categorized by the optical cavity gain medium. Common categories are:

- Solid-state lasers (Nd:YAG crystal lasers, diode lasers, DPSS lasers, among others)
- Gas lasers (excimer, CO2, HeNe, etc.)
- Liquid lasers (dye lasers...)
- Active optical fiber lasers

Lasers can also be categorized through particular properties: femtosecond lasers, pulsed lasers, terahertz lasers...

How to choose

Laser choice depends on the application and required power level.

Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation