|
|
Mitsui Seiki introduces 5-axis CNC laser drilling machine for high-speed, precision holemaking in tough alloys
[FRANKLIN LAKES, NJ – APRIL 2008] Mitsui Seiki has launched “VLD-300” a small, vertical, Nd:YAG laser drilling machine for 12-in. cube parts (300 mm x 300 mm x 300 mm in X, Y, Z axes). This machine was developed collaboratively with several aerospace engine component manufacturers who expressed a need for a higher-speed and more accurate laser-drilling machine than what was currently available on the market. It’s common for some workpieces, primarily jet engine high temperature alloy parts, to require about 3,000 small diameter cooling airflow holes – each at a different angle – to be drilled in a non-contact manner. Laser is often the best option for speed and to minimize material stress. Inconel, Waspalloy, Hastalloy, and nickel-based titanium alloys are the typical materials.
After three years in research and development, the VLD-300 offers positioning accuracy and repeatability in X, Y, Z-axes of 0.00004" (0.001 mm). A axis positioning accuracy is ±6 arc seconds; repeatability ±3 arc seconds. C-axis accuracy is ±4arc seconds; repeatability ±2 arc seconds. X, Y, Z-axes cutting feed rate is 0.004 ~ 787" (0.1 ~ 20,000 mm) X, Y, Z-axes acceleration rate is 1.5g.
Mitsui Seiki partnered with a European laser company for the Nd:YAG version of this new machine. The VLD-300 is designed to also work with CO2, diode pump, and fiber lasers for different aerospace and other industry applications, such as certain electronics, medical, and automotive parts.
|
|
|
The laser Microjet® wafer edge grinding machine is suitable for grinding, triplet and slotting furnace wafers. It of provides excellent capabilities for the rem oval furnace micro cracks on the wafer edge, improving RK the same time the fracture strength.
|
|
Application Materials
Steel Aluminum Diamond Ceramics Copper PCB Laminates Plastics Many others
Advantages
Excellent Process Control
No Tool Wear
Increased Throughput
Sub-micron Drilling
Fast and Repeatable Production
|
|
The L-705/L-706 laser systems are highly accurate, easy-to-use bore alignment lasers that can be used for virtually any bore alignment application. Bores ranging from 1.5" (38.1 mm) to 36" (914 mm) or more can easily be accommodated.
The L-705 is used for bore alignments out to 50 feet (15 M) and the L-706 is used from 50 to 110 feet (15 M to 33.5 M). Both lasers feature battery operation and micrometer-controlled angular adjustments, and both lasers are centered to their housings to within .0005" (.013 mm).
Our competitively priced L-705 Laser Borescope system is the fastest and most accurate extruder alignment system on the market. Its patented self-centering target and simple laser fixture are so easy to use you can have misalignment data in less than 10 minutes, including setup!
|
|
For straightness measurement of bores and bearing journals, both in production and in the field. Very stable construction for highest measurement accuracy. Measures both open and closed bearing pockets with equal simplicity. Handles up to 150 measurement positions.
Typical applications: Crankshaft and camshaft bearings in diesel engines, bearing journals and hull penetrations in propeller shaft installations, workpiece positioning in machine tools.
|
|
ProLas - Compact Laser Workstation
Characteristics
This economical workstation incorporates a compact high accuracy design while maintaining great flexibility. The laser energy can be transmitted to the work piece via fiber optics, conventional or scanning optics.
Field of application
The ProLas is designed for laser processing precision miniature components.
Primary applications are found in the medical, dental, electronics, computer, communications, and micro machining industries requiring spot and seam welding plus drilling and cutting.
General Specifications
X axis travel 12" standard (optional 18")
Y axis travel 6"
Z axis travel 9"
Rotary axis with 5c collet holder 360° (optional)
DC servo drive with optical encoders
Positioning repeatability 0.0002"
Lead screw accuracy 0.003"/ft
G&M code programming
CAD/CAM software (optional)
Control Pentium PC with software and interface for all laser functions including laser parameters
Can be equipped with any standard LASAG laser source
With or without Class I enclosure
Fiber, conventional, or scanning beam delivery optics
Electrical, single phase 115V, 15A
|
|
Machining center, automatizable, 4 axes for LASER drilling with diameters from 0,025 mm dof small mechanic parts, such as cylinder filters. The process uses pulsed Nd YAG sources direct or fiber delivered.
The dynamics and precision, entrusted to screw axes in the basic version, can be elevated to the state of the art in the aero version, with linear motors and granite structure.
The high technical content, the ease of use and its specificity make of it an excellent means in the refined processes with LASER technology.
|
|
Laser & Beam Delivery
Cutting Trimming Scribing Ablation Drilling Welding
Non-contact process
Sub-micron machining
No tool wear or breakage
Faster than conventional micro-machining
Accurate and repeatable process control
Low operation cost
Quick set-up and change over
Minimized material loss
|
|
The Preco ST2000, ST2200(pictured) and ST2400 Series Laser Workstations perform multi-axis laser welding, drilling and cutting in a Class I or Class IV enclosure. ST Series Workstations are time and field proven machines designed around fixed beam laser technology and Preco XY motion and control technology.
The rigid Preco design offers a smooth cutting path with high accuracy over the full range of motion and has high overall system reliability with a simple optical path and user friendly PC controls.
|
|
| ... products without technical information |
| |
ProLas - Compact Laser Workstation
Characteristics
This economical workstation incorporates a compact high accuracy design while maintaining great flexibility. The laser energy can be transmitted to the work piece via fiber optics, conventional or scanning optics.
Field of application
The ProLas is designed for laser processing precision miniature components.
Primary applications are found in the medical, dental, electronics, computer, communications, and micro machining industries requiring spot and seam welding plus drilling and cutting.
General Specifications
X axis travel 12" standard (optional 18")
Y axis travel 6"
Z axis travel 9"
Rotary axis with 5c collet holder 360° (optional)
DC servo drive with optical encoders
Positioning repeatability 0.0002"
Lead screw accuracy 0.003"/ft
G&M code programming
CAD/CAM software (optional)
Control Pentium PC with software and interface for all laser functions including laser parameters
Can be equipped with any standard LASAG laser source
With or without Class I enclosure
Fiber, conventional, or scanning beam delivery optics
Electrical, single phase 115V, 15A
|
|
Machining center, automatizable, 4 axes for LASER drilling with diameters from 0,025 mm dof small mechanic parts, such as cylinder filters. The process uses pulsed Nd YAG sources direct or fiber delivered.
The dynamics and precision, entrusted to screw axes in the basic version, can be elevated to the state of the art in the aero version, with linear motors and granite structure.
The high technical content, the ease of use and its specificity make of it an excellent means in the refined processes with LASER technology.
|
|
Laser & Beam Delivery
Cutting Trimming Scribing Ablation Drilling Welding
Non-contact process
Sub-micron machining
No tool wear or breakage
Faster than conventional micro-machining
Accurate and repeatable process control
Low operation cost
Quick set-up and change over
Minimized material loss
|
|
The Preco ST2000, ST2200(pictured) and ST2400 Series Laser Workstations perform multi-axis laser welding, drilling and cutting in a Class I or Class IV enclosure. ST Series Workstations are time and field proven machines designed around fixed beam laser technology and Preco XY motion and control technology.
The rigid Preco design offers a smooth cutting path with high accuracy over the full range of motion and has high overall system reliability with a simple optical path and user friendly PC controls.
|
|
| ... products without technical information |
| |
(2-Panel CO2 Laser)
World Champion of 2-Panel CO2 Laser
Drilling Machine manufacturers
To the world of High quality Cu direct drilling
|
|
High speed 4 beam UV laser drilling machine
To the world of resin direct drilling
2000 holes/sec
World Champion of 2-Panel CO2 Laser
Drilling Machine manufacturers
To the world of High quality Cu direct drilling
|
|
|
|
