|
|
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic screw.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or slide
- manual operation or motorized
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
|
ROLYN Mirror Mounts are designed to give the very best combination of economy and performance. There is no glass-to-glass contact. Clear aperture obscuration caused by the plastic mirror holders is minimal. These three holders form an adjustable rigid orthogonal kinematic mount for the mirror which resists vibration and handling. Black anodizing minimizes reflections. Mirrors are not supplied with the mount.
|
|
As you scan through our various mounts we have a selection of Single Circular Filter Wheel Mounts, a Universal Stand Mount, Compensated Circular Filter Mounts & a 8 Position Filter Mount.
* Compensated Linear Filter Mounts
* Degree Scales
* Mounts
* Storage Boxes
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
Lens holders are designed to position miniature lenses over CCD/CMOS imagers with high degree of accuracy. Lens holder must keep the lens optic axis centered on the active area of the imager. It must also keep the lens axis perpendicular to the imager surface. Some lens holders also provide special features for holding IR cut-off filters and optical low-pass filters. Lens holders are precision-molded with special plastic materials.
|
|
| ... products without technical information |
| |
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic screw.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or slide
- manual operation or motorized
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
|
ROLYN Mirror Mounts are designed to give the very best combination of economy and performance. There is no glass-to-glass contact. Clear aperture obscuration caused by the plastic mirror holders is minimal. These three holders form an adjustable rigid orthogonal kinematic mount for the mirror which resists vibration and handling. Black anodizing minimizes reflections. Mirrors are not supplied with the mount.
|
|
As you scan through our various mounts we have a selection of Single Circular Filter Wheel Mounts, a Universal Stand Mount, Compensated Circular Filter Mounts & a 8 Position Filter Mount.
* Compensated Linear Filter Mounts
* Degree Scales
* Mounts
* Storage Boxes
|
|
| ... products without technical information |
| |
|
The GLO Series lenses are made from a unique thermoplastic material that diffuses a LED’s light output and dramatically reduces “hot spots”. The result is a clean, hi-tech glow that evenly distributes the light along the lens surface and can be viewed from nearly any angle. Currently, VCC offers the SMB 200, SML 190, CLB 300, and CLF 280 as part of the GLO Series. Custom design inquiries are welcome
|
|
Product Highlights
Kowa offers a huge variety of IR-corrected lenses.
Latest development includes IR-corrected lenses for 5MP cameras.
Features
* 1/3" 3-8mm
* F1.0
* Aspherical lenses
* XD-Glass
* most compact in class (43.5x33x42)
|
|
|
|
|
|
Product Highlights
Specifications
Format Size 1/2"
Focal Length 3.5-10mm
Iris Range F1.6-360
Mount CS
Horizontal Angle 1/3" 78.8°-28.1°, 1/2" 108.3°-73.2°
Features
Kowa is the first lens manufacturer introducing a new generation of HD-Multi-Megapixel Day & Night CCTV lenses for IP-Day & Night cameras with more than 3 Megapixel resolutions.
The outstanding performance of the new HD-Multi-Megapixel Day & Night series is achieved due to a special mechanical design and the usage of aspherical lens technology. By using XD-glass (eXtra low Dispersion) and special coating technology these lenses provide crisp colour images in day time and crisp black & white images in night time (IR light) without refocusing. This advanced optical design easily corrects colour aberration and contributes to the birth of this excellent HD-Multi-Megapixel Day & Night series.
The HD-Multi-Megapixel Day& Night varifocal lens series is designed for 1/2" sensors with 2 different models. LMVZ3510-IR covers a focal range between 3,5 – 10mm with an maximum angle of view of 108° whereas LMVZ9020-IR covers a focal range between 9 – 20mm.
Kowa’s advanced HD-Multi-Megapixel Day & Night series will pave the way for High End IP-Megapixel applications in outdoor environment.
LMVZ3510-IR and LMVZ9020-IR are guarantee for HD-Multi-Megapixel resolution during day time and night time with a minimum focus shift.
|
|
Product Highlights
Kowa offers a huge variety of IR-corrected lenses.
Latest development includes IR-corrected lenses for 5MP cameras.
Features
* 1/3" 3-8mm
* F1.0
* Aspherical lenses
* XD-Glass
* most compact in class (43.5x33x42)
|
|
|
|
|
|
Product Highlights
Specifications
Format Size 1/2"
Focal Length 3.5-10mm
Iris Range F1.6-360
Mount CS
Horizontal Angle 1/3" 78.8°-28.1°, 1/2" 108.3°-73.2°
Features
Kowa is the first lens manufacturer introducing a new generation of HD-Multi-Megapixel Day & Night CCTV lenses for IP-Day & Night cameras with more than 3 Megapixel resolutions.
The outstanding performance of the new HD-Multi-Megapixel Day & Night series is achieved due to a special mechanical design and the usage of aspherical lens technology. By using XD-glass (eXtra low Dispersion) and special coating technology these lenses provide crisp colour images in day time and crisp black & white images in night time (IR light) without refocusing. This advanced optical design easily corrects colour aberration and contributes to the birth of this excellent HD-Multi-Megapixel Day & Night series.
The HD-Multi-Megapixel Day& Night varifocal lens series is designed for 1/2" sensors with 2 different models. LMVZ3510-IR covers a focal range between 3,5 – 10mm with an maximum angle of view of 108° whereas LMVZ9020-IR covers a focal range between 9 – 20mm.
Kowa’s advanced HD-Multi-Megapixel Day & Night series will pave the way for High End IP-Megapixel applications in outdoor environment.
LMVZ3510-IR and LMVZ9020-IR are guarantee for HD-Multi-Megapixel resolution during day time and night time with a minimum focus shift.
|
|
|
|
