|
|
|
|
|
|
Metso Minerals (as Sala Maskinfabrik AB, later Sala International AB) has a long tradition in magnetic separation. Already in the end of th 19th century "Sala" built the first magnetic separators.
Metso Minerals LIMS - dry and wet low intensity magnetic separators
Low intensity magnetic separators, LIMS, are designed to recover ferromagnetic materials. The separators are available in designs and sizes to provide solutions for all applications. The heart of each separator is the magnetic system with its unique design, which has a proven record of highest efficiency.
Metso Minerals HGMS - high gradient magnetic separators
High gradient magnetic separators available in cyclic design with process vessel diameters from 220 mm to 3 050 mm and in continuous design with matrix ring mean diameters 1 200 mm, 1 850 mm, 2 500 mm and 3 500 mm.
We are the OEM (original equipment manufacturer) for equipment manufactured under the following brand names, and is the only supplier of parts with the original drawings and design details for:
Metso Minerals, Denver, Svedala, Sala Maskinfabrik and Sala International LIMS and HGMS
|
|
Housed deep field chute magnets are used for the removal of tramp iron, for example, nuts, bolts, washers and mill balls from gravity fed pipelines and chutes.
These 'Primary' magnets are installed in goods inwards points or mid process to prevent large pieces of contamination damaging expensive processing equipment.
One of the main benefits of incorporating this type of unit is that there is no restriction inside the unit enabling already established product flow rates to be maintained.
All product contact parts are manufactured using 316 grade stainless steel.
ATEX type approval – we can supply ATEX certified products direct from our factory cutting turnaround and costs.
|
|
Separation equipment includes magnetic plates, grates, and traps, rolls and tubes, drum separators, ferrous traps, magnetic pulleys, magnetic sweepers, non-ferrous eddy current separators, and electromagnetic separators... for removing fine and large tramp iron from various materials, and at the same time protecting machinery.
|
|
Plate magnets
Application: Extraction of tramp iron from various products (grain, sand, ore, coal, waste, etc.), protection of processing machinery.
Main features:
- Custom-manufactured models with a wide range of options for special applications;
- Reliable and suitable for heavy duty applications, extra-sturdy models for separation of abrasive materials;
- Powerful Nd-Fe-B magnets used;
- No electric power required for magnetic field generation;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) All plate separators are custom-manufactured, please attach a completed questionnaire to quotation requests
|
|
(PNEUMATIC)MAGNETIC SHEET SEPARATORS
Goudsmit's very powerful sheet separators loosen, lift and separate sticky or oily steel sheets from a stack in rapid succession.
- They remove the sheets systematically, one by one to ensure a smooth
production process.
- They prevent tool and die damage by eliminating double blank problems.
- Suitable for the separation of sheets of almost any length, width or shape,
inlcuding round and asymmetrical products.
- The permanent magnetic power does not decrease and is guaranteed for several
decades.
- Expensive compressed air systems are no longer required to separate the steel
sheets as separating magnets will do the job at a much lower cost.
- Pneumatic version can be switched on and off pneumatically and can be
adjusted in height and also the magnetic field's spread force can easily be
adjusted.
|
|
|
With BM sheet separators, the individual sheets (steel plates) from a stack are separated automatically through the magnetic fields created by the separator. So the can be easily picked up. A range of more than twenty different standard sizes is available. For specific applications, they can also be supplied in other sizes on request.
|
|
They facilitate the manual gripping of sheet metals and avoid the double catch on dépileuse.
PRODUCTIVITY AND SAFETY:
The sheet metal blanks or bands piled up tend to adhere the ones aus others, causing wastes of time during their gripping.
The separators allow them "to float". Their gripping is very easy, moreover one eliminates the risks from simultaneous sending of two blanks under the cutting tool.
PRINCIPLE:
Sheet metals are locally induced with the same polarity as the poles NR and S of the separator. The zones thus polarized of the same name, push back and cause the separation of sheet metals. The magnetic field created causes a space between the blanks. This space is increasingly important to the top of the battery cell.
When the operator takes the first blank, the second takes its place with the higher part of the separator.
|
|
Sheet separators were specially developed to permit easy and uninterrupted removal of steel sheets stacked horizontally or vertically. No more prying apart of greasy or oily sheets.
A sheet separator saves money. Sometimes compressed air is used as a sheet separator. Air is very expensive. Properly designed magnet sheet separators do the same job free from ongoing costs.
Advantages of Walker Magnetics sheet separators
Stable magnet pack
No gradual loss of magnetic power
No special precautions for storage
Stainless steel cover
Robust construction
High separating power yet compact dimensions
Large range of sizes
Very simple mounting
|
|
| ... products without technical information |
| |
|
|
|
|
The laboratory hotplates and stirrers from SI Analytics demonstrate the kind of creative design that results when practical laboratory experience is paired with the most advanced materials know-how.
Our variety of 4 laboratory hotplates enables speedy heating up (SLK 1, SLK 2), with a temperature control if required (SLK 2-T, SLK 6).
The laboratory stirrer (SLR) is the optimum solution for a careful to intense mixing of liquids. It can also be used for speedy heating up or controlled temperature adaptation.
Both product families have the benefits of the glass ceramic heating surface which as proven in millions of households. Chemical resistance, a high sur face quality, and a resistance to temperature shocks of more than 700 °C provide the user with maximum benefits compared to conventional heating surface materials. The poreless smooth surface enables even most stubborn dirt to be easily removed. The high infrared permeability ensures that the heating energy is transferred quickly and with a low loss rate, i.e. it heats liquids faster than other heating surface materials, and thus saves energy.
|
|
|
|
|
|
Stuart CB/SB162 Hotplate stirrers
Choice of robust aluminium or chemically resistant ceramic tops
Advanced safety features:
- Flashing "Hot" warning light
- Spillproof design
- Independent safety circuit to protect against overheating
Microprocessor control for accurate temperature setting
Stylish and economical general purpose stirrer hotplates designed with safety as well as performance in mind. The cast aluminium body is shaped for stability and helps deflect spills away from the controls and the user. The "Hot" warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.
Model CB162 has a glass ceramic top which has excellent chemical and temperature resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes.
Model SB162 has a robust aluminium/silicon alloy top plate for good heat transmission. A 700W element gives rapid heating and ensures even temperature distribution across the whole of the plate.
Fitting for retort rod and supplied with 2 x 25mm PTFE coated stir bars.
|
|
| ... products without technical information |
| |
|
|
|
|
The laboratory hotplates and stirrers from SI Analytics demonstrate the kind of creative design that results when practical laboratory experience is paired with the most advanced materials know-how.
Our variety of 4 laboratory hotplates enables speedy heating up (SLK 1, SLK 2), with a temperature control if required (SLK 2-T, SLK 6).
The laboratory stirrer (SLR) is the optimum solution for a careful to intense mixing of liquids. It can also be used for speedy heating up or controlled temperature adaptation.
Both product families have the benefits of the glass ceramic heating surface which as proven in millions of households. Chemical resistance, a high sur face quality, and a resistance to temperature shocks of more than 700 °C provide the user with maximum benefits compared to conventional heating surface materials. The poreless smooth surface enables even most stubborn dirt to be easily removed. The high infrared permeability ensures that the heating energy is transferred quickly and with a low loss rate, i.e. it heats liquids faster than other heating surface materials, and thus saves energy.
|
|
|
|
|
|
Stuart CB/SB162 Hotplate stirrers
Choice of robust aluminium or chemically resistant ceramic tops
Advanced safety features:
- Flashing "Hot" warning light
- Spillproof design
- Independent safety circuit to protect against overheating
Microprocessor control for accurate temperature setting
Stylish and economical general purpose stirrer hotplates designed with safety as well as performance in mind. The cast aluminium body is shaped for stability and helps deflect spills away from the controls and the user. The "Hot" warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.
Model CB162 has a glass ceramic top which has excellent chemical and temperature resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes.
Model SB162 has a robust aluminium/silicon alloy top plate for good heat transmission. A 700W element gives rapid heating and ensures even temperature distribution across the whole of the plate.
Fitting for retort rod and supplied with 2 x 25mm PTFE coated stir bars.
|
|
| ... products without technical information |
| |
Product Description
BM magnetic sheeting is a high quality product made of ferrite powders and thermoplastics. BM magnetic sheeting meets all requirements of the European Standards for Toys, EN71-3.
Magnetic Properties
Maximum Energy Product: 0.65 to 0.75 MGOe
Remanence: 1600-1900 G
Coercivity: 1200-1500 Oe
Intrinsic Coercivity: 2200-2500 Oe
|
|
| ... products without technical information |
| |
... see all the products in the category
Magnets
|
RECTANGULAR LIFTING MAGNETS
Electromagnets are intended for lifting mechanisms to catch and shift the cold ferromagnetic loads: sheets, squares, channels, rails, blooms, slabs, etc.
These lifting magnets can operate on the traverse and are recommended for installation on light and mobile excavators such as FUCHS, LIEBHERR, ATLAS, SENNEBOGEN, CAT, ZEPPELIN, KOVROVETSetc. complete with a generating control system and a special traverse for loading sheets, sguares, channels, rails, blooms, slabs and the like.
All electromagnets can be produced as heat-resistant (to lift loads of the temperature as high as 600°C) and for underwater works.
|
|
|
|
|
|
Walker Self-Contained Lifting Magnets are versatile, compact and easy to operate.
Self-contained magnets can be used to move material in any plant, shipping/receiving area and storerooms, as well as on cut-off saws and burning and welding tables. Some units are able to handle pipe, tubing I and H beams, angles, channels, Tees, Zees and pilings.
Walker produces three types of Self Contained Magnets: Permanent, Battery and Electric.
PERMANENT LIFT MAGNETS
For Flat and Round Material Handling
Permanent magnets operate with the push of a handle. There are no restrictive cords and no power is needed. Models include:
CM400 & CM800 TOTERS For Flat Material Handling
The CM is a compact, self-contained, lifting magnet that uses permanent magnets to maintain holding power indefinitely.
NEO-250, 500, 1000 and 2000 For Flat and Round Material Handling
The NEO-250, 500, 1000 and 2000 Series material handling magnets are used in steel, supply, machine and die shops where heavy steel objects must be moved quickly and safely.
NEO-HV - For Vertical Handling
Walker NEO-HV material lifting magnets are designed for Vertical Loading into Machining Centers and Lathes. They will handle loading of flat, ferrous metal workpieces onto any machining center with horizontal spindle type lathes. They are used to load machining centers, boring machines and other chip-making operations.
|
|
|
|
