Materials handling modules

18 companies | 42 products
Materials handling modules
  • Options
pick-and-place materials handling module - PPU-E 50

SCHUNK's Pick & Place Unit PPU-E 50 features an interpolation of programmable axes with an available back panel connections for premium accessibility. It has an inactive...

pick-and-place materials handling module - PPU-P 30

The Schuck Pick&Place Unit PPU-P 30 is specifically designed as a solution for gripping system applications. It has the capacity to handle payloads of up to 3 kg. Through its complete...

pick-and-place materials handling module - PPU-P

PPU-P is a pick and place unit available in the market which can deliver about 95 cycles in a single minute. It is the fastest device on the market. Unlike the convention unit, it has...

{{productDetail[12463]}}
pick-and-place materials handling module - HSP

The product may come with electric drive, pneumatic drive, drive shaft, or without...

{{productDetail[4735]}}
pick-and-place materials handling module - 5 kg, 4 m/s | PPU-E 50

SCHUNK PPU-E 50 gripping systems are the latest addition to the PPU-E series with linear direct drive. PPU-E is the quickest Pick&Place unit available in the market with fastest cycle times. For an entire cycle with horizontal stroke of 280 mm and vertical stroke of 150 mm, the PPU-E 50 requires...

pick-and-place materials handling module - 3 kg | PPU-P 30

The PPU-P 30 is developed to work for payloads that can run up to 3 kg, the PPU-P30 can reach up to 75 cycles per minute. The strokes can be worked out horizontally by 18 mm per side and...

{{productDetail[7038]}}
pick-and-place materials handling module - 3 kg | PPU-P 30

PARKER HANNIFIN offers a range of solutions for pick and place handling operations. They have units that deal with small bottle...

{{productDetail[60888]}}
high-speed materials handling module / pick-and-place - max. 5 kg, 4 m/s | PPU-E 50

SCHUNK's Pick & Place Unit PPU-E 50 features an interpolation of programmable axes with an available back panel connections for premium accessibility. It has an inactive...

pick-and-place materials handling module - 60 - 210 mm, 3 kg | PPU-P 30

Payloads of up to 3kg can be handled by the PPU-P 30. It was created to share in the success of its more compact counterpart, the PPU-P 10. Both of these devices are fasted pneumatic...

compact materials handling module / pick-and-place - 250 x 100 mm | PPU-E30

SCHUNK's Pick & Place Unit PPU-E 30 features an interpolation of programmable axes with an available back panel connections for premium accessibility. It has an inactive...

{{productDetail[69812]}}
compact materials handling module / pick-and-place - max. 70 mm | HP70

Vertical stroke: 0 - 70 mm (freely programmable)
Horizontal...

pick-and-place materials handling module - max. 65 mm | P140T

Vertical stroke:0-65 mm (freely programmable)
Horizontal...

pick-and-place materials handling module - max. 100 mm | HP 140T

Whether HP140 or HP70: The Pick&Place from WEISS work with two linear axes and due to this profit from all...

{{productDetail[14505]}}
pick-and-place materials handling module - max. 20 N, max. 50 mm | LAR31 Series

High precision and long life linear rotary actuator, LAR31 series, can easily be programmed to control force/torque, position & velocity in all axes. Light moving mass = can land on parts...

{{productDetail[38786]}}
compact materials handling module / pick-and-place - FN series

The FN Series is a compact pick & place unit with relatively large stroke...

pick-and-place materials handling module - FA series

The FA Series is an oscillating handler that is based on the FN Series but offers...

pick-and-place materials handling module - FU series

This handler uses a large diameter roller...

high-speed materials handling module / pick-and-place - max. 600 rpm | FH series

The FH series cam-actuated pick & place unit was developed...

pick-and-place materials handling module - F series

The F series is our high-end pick & place unit. It is driven...

{{productDetail[9160]}}
compact materials handling module / pick-and-place - max. 3 kg, max. 300 mm | EDP mini

The EDP mini is a linear motor handling which is far superior to pneumatic handling systems with regard to cycle times, economic efficiency and power consumption.

It consists of two freely...

pick-and-place materials handling module - max. 4 kg, max. 360 mm | EDP standard

The pick-and-place modules EDP are based on EDM modules. These modules were especially developed to reach shorter cycle times. The pick-and-place module
EDP...

pick-and-place materials handling module - max. 5 kg, max. 360 mm | EDP maxi

Compared to the EDP standard, the EDP maxi is designed for longer strokes or higher load capacities. Therefore a very dynamic system is available for this sector,...

pick-and-place materials handling module - max. 4 kg, max. 1 450 mm | EDP Portal standard

The EDP portal standard offers high dynamics due to a very dynamic linear motor in the X-axis and the very lightweight Z-axis....

pick-and-place materials handling module - max. 5 kg, max. 1 450 mm | EDP Portal maxi

The EDP portal maxi transports heavy loads with high dynamics.

Compared...

{{productDetail[112241]}}
pick-and-place materials handling module - max. 5 kg, max. 1 450 mm | EDP Portal maxi

The Pick-and-Place Procedure of DEPRAG is suitable for complicated external geometries if the feedability criterion a is < 30°. For handheld tools, fastener is picked-up by either vacuum suction or magnetic bit. On...

{{productDetail[15675]}}
pick-and-place materials handling module - 800 x 200 mm, max. 2 kg, max. 45 c/min | H 050

The H 050 handling system automates the process of pack separation and is designed...

pick-and-place materials handling module - 1000 x 300 mm, max. 5 kg, max. 50 c/min | H 100

The H 100 handling system automates the manual functions of packaging tasks hygienically...

pick-and-place materials handling module - 1100 x 250 mm, max. 10 kg, max. 120 c/min | H 130

The H 130 of Multivac not only ensures excellent flexibility but also guarantees great versatility in countless...

pick-and-place materials handling module - 1100 x 250 mm, max. 1 kg, max. 240 c/min | H 240

Designed for the automation of numerous manual tasks, the MULTIVAC H 240 allows for...

{{productDetail[18330]}}
pick-and-place materials handling module - KeMotion

KeMotion Packaging from KEBA is the solution for the efficient use of robots in the packaging industry. This is because it consists of a hard- and software package that not only offers outstanding performance and generous operational scope, but also strengths...

{{productDetail[13968]}}
pick-and-place materials handling module - max. 120 c/min | GY series

Sankyo's GY series features narrow cast iron housings with upright, inverted or side mounting configurations since it is grease lubricated. Globoidal cams rotate Sankyo manufactured needle bearing type cam followers. Optimizing the cam follower diameter inherently maximizes torque transfer...

pick-and-place materials handling module - max. 90 c/min | GW series

Sankyo's GW series X and Y stroke linear handler is designed to be driven with a rear mounted spur gear. A rounded housing configuration permits multiple units placed around a drive gear in close proximity. One full cycle (home-pick-place-home)...

{{productDetail[16451]}}
pick-and-place materials handling module - max. 120 p/min | Clippy series

Clippy automatically dispenses products thanks to the suction mechanism using a Venturi vacuum generator: coupons and objects are sucked and...

{{productDetail[68391]}}
pick-and-place materials handling module - max. 60 p/min | EM5

With cam controlled pick-and-place unit EM5. The special features of the pick-and-place unit are the high preciseness of repetition...

{{productDetail[24549]}}
pick-and-place materials handling module - max. 60 p/min | EM5

Pick and Place Units are customized based on the automation application requirements....

{{productDetail[59219]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation