|
|
Suitable for picking of primary and secondary foods, the M-430iA/2F has a long reach of 900mm and five axes flexibility to accommodate horizontal or vertical product placement positions.
The anthropomorphic arm design produces a large work envelope that allows the M-430iA/2F to quickly rotate or flip back on itself. The arm can be ceiling or floor mounted.
Two high-speed heavy duty motors for each of the major axes, joints one, two and three, use FANUCs Dual Drive Torque, Tandem Control Technology. This allows very high speeds to be achieved by the M-430iA/2F: up to 120 cycles per minute at 1kg payload.
The M-430iA/2F has been designed to meet stringent cleanliness requirements and has a smooth exterior surface with no contaminant trap areas the paint has a high gloss finish and is resistant to acids and alkaline materials.
Designed for hose down cleaning, the robot is sealed to meet IP 67 standards and double seals on the major axes not only keep fluids out but ensure that its food grade grease stays within the durable casings. Joints four and five use nylon gears and do not require any lubrication.
The M-430iA/2Fs runs with the new intelligent controller the R-30iA series with fully integrated vision control system iRVision |
|
Together with integration partners, FANUC Robotics offers a range of advanced solutions to speed up end of line operations.
With a payload range from 2 to 700kg, you are sure to find the robot model that best suits your needs:
very high speed M-430iA/2F dedicated to food industry (food grease, up to 120 picks per minute, washable)
High speed M-6iB series (2-10kg payload) for very fast pick&place applications. Higher payloads are managed at high speed with M-420iA-M-421iA robots (40-50kg)
M-410iB series (160-450kg): the most successful palletizing robots in Europe!
M-900iA series (260-700kg) for very heavy payload with highest wrist inertia. Smaller payload can be handled with the top selling M-710iC (20-70kg) or R-2000iB series (100-210kg)
Our intelligent software and systems ensure reliable and safe handling operations:
Integrated vision: our latest R-J30iA controller comes as standard with all the necessary hardware for 2D vision: just plug a camera and a cable! This is most cost-effective solution on the market!
Line tracking software
Collision Guard to protect robot, tooling and products
Advanced vision for 2D visual line tracking or 3D bin picking
Multi robot control for increased cycle time |
|
The Adept Quattro s650 robot utilizes a patented 4-link parallel drive and carbon fiber construction to provide packaging cycle times which are twice as fast as conventional packaging robots and up to 240 pick-and-place cycles per minute.
The Adept Quattro s650 robot is also the world's first packaging robot to integrate the controls inside the robot virtually eliminating external controls cabinets saving valuable factory floor space and simplifying installation.
Adept's industry leading SmartController platform provides fully integrated vision and conveyor tracking for up to 6 conveyors making the Quattro an ideal solution for high speed packaging applications in which products are randomly located on moving conveyor belts.
The Adept Quattro features over-the-belt mounting, a 1300 mm work envelope and 250 mm Z-stroke along with a wash down option for usage in sensitive manufacturing environments, which require frequent washing to prevent product contamination. |
|
| KUKA's many years of experience in palletizing offer you new possibilities in the field of palletizing and depalletizing. The tried-and-tested modular system gives you the choice of a wide range of perfectly-coordinated components. |
|
Servo Pick and Place (SPP) can be provided by any combination of Servo Horizontal and Servo Vertical Units (with protective hose or cable-chain).
The Servo Horizontal Units SHE were developed for shorter strokes. The three standard stroke lengths 100 mm, 200 mm and 300 mm are available from stock.
The Servo Vertical Unit SVE is provided for the vertical motion.
This is available with the two strokes 100 and 200 mm. Two versions are supplied with respect to cable routing: protective hose or cable-chain as required.
The Automation and Quick-Set components below are available at advantageous prices in our online shop. |
|
TM Robotics offer a series of SCARA robots from the TH-250 through to the SR-1504. All have unique handling capabilities for varying workloads. The SCARA range can offer robots with arm lengths of 250mm to 1500mm, and workload capacitys from 3kg to 70kg.
Perhaps the most innovative of the Toshiba Machine SCARAs are the TH-250 and TH-350, which provide better accuracy and repeatability than comparable SCARA's, and offer quicker cycle times and faster motion. These new SCARAs are so precise that they can even be used to good effect in the electronics industry. The TH-250 and TH-350 feature payloads of up to 3kg and repeatability of ?0.01mm. These robots are suited to applications in the handling of small components, such as electrical, mobile phone and camera parts, assembly and test equipment. Other applications that demand similar accuracy are hard disk drive assembly, as well as very high precision work, such as optical lens grinding and watch assembly. Furthermore, the TH-250 and TH-350 allow the user to place electronic components on PCB boards, or even handle the optical pick up lenses used in CD and DVD disc drives. |
|
This is an area in which ABB services a multitude of installations, covering a host of different products, applications and packaging line set-ups.
These include frozen food, bakery and confectionary as well as ice-cream, meat and fish, cheese, pet food, medical products, shampoo and perfume bottles.
Able to achieve a staggering 150 picking cycles per minute, the IRB 340 FlexPicker is our star performer in this area.
For full 6-axis flexibility, less demanding cycle times and payloads of up to 5 kg, we recommend our IRB 140. |
|
This is an area in which ABB services a multitude of installations, covering a host of different products, applications and packaging line set-ups.
These include frozen food, bakery and confectionary as well as ice-cream, meat and fish, cheese, pet food, medical products, shampoo and perfume bottles.
Able to achieve a staggering 150 picking cycles per minute, the IRB 340 FlexPicker is our star performer in this area.
For full 6-axis flexibility, less demanding cycle times and payloads of up to 5 kg, we recommend our IRB 140. |
|
| ... products without technical information |
| |
Suitable for picking of primary and secondary foods, the M-430iA/2F has a long reach of 900mm and five axes flexibility to accommodate horizontal or vertical product placement positions.
The anthropomorphic arm design produces a large work envelope that allows the M-430iA/2F to quickly rotate or flip back on itself. The arm can be ceiling or floor mounted.
Two high-speed heavy duty motors for each of the major axes, joints one, two and three, use FANUCs Dual Drive Torque, Tandem Control Technology. This allows very high speeds to be achieved by the M-430iA/2F: up to 120 cycles per minute at 1kg payload.
The M-430iA/2F has been designed to meet stringent cleanliness requirements and has a smooth exterior surface with no contaminant trap areas the paint has a high gloss finish and is resistant to acids and alkaline materials.
Designed for hose down cleaning, the robot is sealed to meet IP 67 standards and double seals on the major axes not only keep fluids out but ensure that its food grade grease stays within the durable casings. Joints four and five use nylon gears and do not require any lubrication.
The M-430iA/2Fs runs with the new intelligent controller the R-30iA series with fully integrated vision control system iRVision |
|
|
|
