|
|
6 Colors Offset Printer
4 Colors in 1 line plate to ensure the average printing roller pressure from start to end.
Model: HS-480WD
- Computer to Film system.
- Motor driving conveyor loading/unloading type according to CE required, no moving parts outside.
- Linear indexing printing conveyor table.
- 4 colors in one line plate to ensure the average printing roller pressure from start to end.
- Alternative or combination for screen and offset printing.
- Quick plate change
- Fully compatible integration with ldent code and print label check. (optional)
- Special printing table design, no ink contamination.
- Quick change from CD to DVD printing.
|
|
AUREL Full Automatic Printing line for Cermet potentiometers
Features
• Loading from stack magazine
• Belt transport
• Screen Printer
• Collocator with gripper-head
• Drying furnace
|
|
Panasonic's SP18 high speed screen printing machine is the ultimate solution for lean SMT manufacturing. Our original uni-floating printing method reliably delivers the right amount of solder in the right form - with high-speed snap-off and reduced solder waste.
The SP18's intuitive interface enables the operator to set parameters based on production requirements - making print condition adjustments nearly automatic. Automatic batch teaching of the board and recognition mark functionality further enhance its appeal.
Quick changeover, compatibility with industry standard stencils, and optimal efficiencies will increase your profits and increase your accuracy to world-class levels.
Features & Benefits
Economical solution for lean manufacturing
Intuitive interface - set parameters based on production requirements
Compatible with industry standard stencils
Customizable operator screens support user authority
Quick changeover ensure continual production
Efficient, small footprint
|
|
|
|
|
|
AUREL C2025TL High precision Screen printer
Description
The AUREL Mod. C2025TL is a high precision screen printer for very large areas up to 700x600 mm.
Special table for vacuum hold down of foils and for holes metallization.
Options
• Vacuum table for thin foils hold down
• Holes metallization or holes filling
• Cross Flow head
• Clima controll
• Special automatic handling system
• Proguide vision system
• Automatic stencil cleaning
Technical Features
• Double squeegee head for the use of metal squeegees or rubber squeegees.
• Squeegee drive actuator with DC servomotor and very smooth movement of the printing head.
• Printing mode: Contact, Off Contact, Single Print, Double Print, Print & Flood, Delay after Print.
• High precision and repeatability gor fine pitch printing.
• Motorized squeegee with programmable printing pressure and down-stop.
• X-Y-q adjustment by centesimal micrometers, on the shuttle table.
• Motorized and programmable screen lift movement (Z axis) for the function "slow snap-off" very important on fine line printing.
• PC control with menu programming printing parameters, diagnostic, timer adjustment for delay after print, data storage.
• Screen holder and printing head lift for easy set up and cleaning.
|
|
|
|
|
|
PAD PRINTING MACHINE GTO EVOLUTION 5 COLOURS MAXI WITH DISERFIED DESCENT
- Supporting frame completely in aluminium casting
- Electro-pneumatic operation
- Equipped with 5 closed ink cups, Ø 110 mm. with internal and external teflon coating to reduce the cleaning operations and times
- Type block size 300x125 mm.
- Max printing area 100x90 mm.
- Bed in painted sheet, included
- Programs with 1-2-3-4-5 colours
- Equipped by, individual pad Dow stroke every cylinder
- Double colour intake program included
- Speed/pause adjustment through keyboard
- Electronic piece shifting unit, programmable through the external keyboard
- Type block holding bed adjustable on two axis
- Pad down stroke adjustment through keyboard with on-screen display
- Piece counter with displaying of hour average production rates
- Sliding side guards
- Decibel noise level reduction filters
- Piece holder, adjustable on the three axis, complete with oscillating adjustment to facilitate the printing on objects
- With diagonal level
- 220 Volt
- 6 Bar
|
|
|
|
|
|
ROTOTAK 5
The rotary 1-colour pad printing system used to print shaped heels or monoblock soles in one colour to obtain a leather effect, floral decorations or other effects. System description:
Pad printing machine GTO EVO
Type block dimensions: max 600x200 mm.
Adjustable stroke on two sides.
Electro-pneumatic operation.
Max. printing dimensions: 150x300 mm.
Hermetically sealed inking system with ceramic ring Ø 180 mm.
1 standard cup.
Structure: cast in aluminium alloy
Standard columns on enclosed bearing structure.
Heel handling system:
Handling system of the heel made up of 5 NC interpolated axis system. The 1st axis makes the linear movement of the piece, a 2nd axis turns the piece under the pad simultaneously and in a synchronised manner, the 3rd axis raises and lowers the piece to adapt to the shape of the heel in order to avoid straining the pad excessively. The 4th axis tilts the piece to adapt to the last print, given by the second pad unit. Finally the 5th axis turns around the vertical axis.
The heels are manually positioned by the operator in a blocking device made up of nr. 2 relief and shaped jaws that perfectly grasp the items.
Automatic piece discharger.
Software:
Customised with settings made using a keyboard and through self-learning function.
Possibility to save the operational data on disk for one colour for each model.
Safety systems:
Installed on the actual machine in compliance with current norms, plus EC declaration of conformity.
Page 2
Hourly production: Roughly 400 pcs/hour with women and men heels, 200 pcs/hour with monoblock soles.
|
|
|
|
|
|
Aero 60 Single-Color Pad Printer
The Aero 60 from Trans Tech is an electro-pneumatically driven, table-top pad printer that hits the target for operations seeking a machine with high value performance on lower-volume, single-color applications. The design and operating features make this an ideal choice for manual jobs where quick changeovers of artwork and fixture are required. It comes equipped with our patented SpaceFrame and ExpressLiner system.
Main Features & Benefits:
Compact, efficient profile: Its minimal footprint and lightweight profile make the Aero 60 an easy unit to install, move, and ship. It can be easily mounted to any stable base or workbench or relocated for an alternate application.
Modular control and machine design: With the simplicity of its modular design, plug-and-play accessories make the Aero 60 both functional and flexible. Plus, with its standard interface control, it can easily be configured into multi-printer systems.
SpaceFrame and ExpressLiner advantages: Designed to use the popular SpaceFrame & ExpressLiner ink cup system, operating the Aero 60 improves production efficiency by enabling faster set-ups and changeovers on multiple short-run pad printing jobs.
|
|
There are six models in our line of Printex G2 pad printing machines. Although each model is separated by size and multifunctional capabilities, they are united by a common design criterion that bring advanced and practical advantages to the end user.
Our modular concept incorporates built in mechanical; electrical; and control interface features which enables every model G2 printer ready to mate with automation (yours our ours).
By using an array of optional “plug and play” devices such as our pneumatic or servo actuated slides, motor driven turn tables, carousel or over/under indexers, as well as transverse ink cup drive devices, the user can easily transform a G2 printer to meet different printing situations and requirements.
Six years since its introduction, the G2 “modular concept” has been a proven success, from concept to application, this is what separates G2 from the competition.
|
|
Suitable for non-deforming materials especially for uneven printing surface, such as computer keys, stationery, golf ball, etc.
Specification
1. Micro-computer control, with single/automatic operation, printing quantity / printing & flooding
times setting, light/beeper indication.
2. X / Y table left-right & up-down adjustment
3. Tampon pad / Doctor blade pressure adjustment.
|
|
|
On the basis of the proverbial MORLOCK reliability, the objective was to design a flexible and high-performance pad printing machine that is extremely easy and uncomplicated to operate. This resulted in MDX 100, a machine type that soon became a "favourite" amongst its users.
|
|
Pad printing is an indirect gravure printing process. The copy or image is etched into a steel plate called a cliche. The cliche is inked and then cleaned with a doctor blade. This leaves the ink in the etched areas only. A flexible silicone pad picks up the image from the cliche and then transfers the image to the product.THIS SYSTEM is adaptable to a variety of shapes and contours on parts with a variation in the surface, yet fine detail and precise copy can be achieved. Two color process is obtained with exact registration. Pad Printing is ideal for decorating toys, plastic housewares, and injected mold components.
This technology also lends itself to marking electronic components such as resistors, canisters, and connectors. Any part, plastic, ceramic, or metal can be production marked by this process. The equipment can be semi or fully automated, yet remains a low capital expenditure.
|
|
|
|
|
|
No. 1 ROTOTAK 1 EVO MODEL
Pad-printing machine used to decorate women%u2019s heels with angle open on two sides, front and back, with two strokes for leather, cork and other desired effects.
System description:
- Machine structure cast in aluminium alloy, base included;
- Equipped with No. 2 closed ink cups with 110mm-diameter ceramic ring; the cups are internally and externally coated with Teflon to facilitate the cleaning operations;
- Printing plate dimension for colour 120x450mm.;
- Max. printing dimension 200x90 mm.;
- Control keyboard;
- Electronic and differentiated adjustment for the two pads in printing phase carried out directly through the keyboard with values displayed;
- Printing pause and pick-up pause differentiated adjustment;
- Speed adjustment of each movement by means of flow regulators;
- Printing plates micrometric adjustment on the two axis and diagonal adjustment to obtain a quick centring;
- Heel-holder unit adjustment on the 4 axis, including the oscillating one;
- Possibility to use the machine in single or automatic cycle.
Hourly production: is estimated at 400/500 pieces/hour.
|
|
Automated Equipment
Various types and sizes of syringe barrels are decorated at high speed and with precision using fully automated rotary pad printing systems.
|
|
AUREL VS1520A Screen-stencil printer
AUREL VS1520A Screen-stencil printer for high quality fine-line and fine-pitch printing on Ceramic substrates, LTCC, PWB, WAFERS, GLASS, METAL
Description
The series VS screen-stencil printer uses highly advanced mechanical and electronical solutions to guarantee superior quality in fine-line and fine-pitch printing on Ceramic substrates, LTCC, PWB, WAFERS, GLASS, METAL etc.
The Automatic Vision System ensures resolutions better than 2 microns. All the machine's movements are motorized and programmed by a user friendly menu.
|
|
Suitable for non-deforming material or rigid substrate flat surface printing, such as acrylic sheets, transferring paper, computer keys, stationery, golf ball, etc.
Suitable for non-deforming material or rigid substrate round / conical / oval printing, such as bottles drun, glass, etc.
|
|
High-speed printing with superb accuracy :
Printing accuracy of less than 20 µm
Printing cycle time 7.0 seconds + printing time
2-camera automatic calibration
Easy operation
Within 2 minutes production changeover
Small footprint of 1,1 x 1,285 m
|
|
Close tolerance screen and stencil printing is usually associated with smaller-format substrates and print areas such as used in micro-electronics. In recent times, however, there is a growing need for larger-format applications as used in the medical, solar, display, and flexible electronic circuitry fields.
MTS® Series printers allow better process stability for large areas--in all axes, and with superior results based on your screen making capabilities. Preco’s X-Y-theta camera registration can be equipped with a variety of fiducial recognition techniques, to provide unique repeatable accuracy for all formats.
|
|
|
|
|
|
Function
Large board dimensions, different conveyor modes tor different throughput rates and a new high-speed inspection function - these
are the key product features of the X6. Printing tables with different designs tor different versions allow solder paste printing on partly assembled circuit boards (i.e. components mounted on the opposite side) with formats ot up to 610 x 550 mm. The choice
of the right circuit-board conveying system is determined by the required throughput rate. The single-track system conveys the
circuit-board safely through the printer and requires a handling time of only 12 seconds.
The single-conveyor HSP version with its tripartite conveyor belt shortens this handling time to less than 7 seconds.
The new high-end version of the EKRA 2 1/2-D postprint inspection delivers several images from up to 4 inspection stations every
second, thanks to the use of the latest linear engine drive technology. The use of a larger camera sensor increases the field
of view to 20 x 16 mm without any loss in resolution, ensuring that the 2 1/2-D postprint inspection system delivers consistently better results than the so-called line-scanner solutions and allowing
a thorough analysis of the solder paste printing quality on the basis ot its images.
Standard version with adjustable squeegee pressure and as a VIP head with weight compensation and fine-tuning for the squeegee
power. The automatic stencil-cleaning function also features in the basic version.
|
|
|
MORLOCK offers a variety of standard pad shapes. All pads are manufactured using our state-of-the-art computer-controlled system. The use of exclusive, high-quality silicon material and continuous quality control in our laboratory ensure the high standard of our pads.
|
|
Pad Plate Exposing Unit
A low cost and convenient exposure unit for pad stencil exposure. Eeposure area is 280¡Á400mm; It can be applied for thick steel plate, thin steel plate and photo-polymer plate image .It is not suitable for exposuring on screen plate because there is no vacuum device and rubber clothes; The built-in digital timer provides excellent exposure timing control.
Price Terms©U FOB GuangZhou
Payment Terms©U T/T. LC
Packing©U Wooden case
Lead Time©U Within 3 days
Standards Certificate©U ISO9001-2000
Power Supply©U 220v-50HZ-1 PHASE
Colour Painted ©U White
Specifications©U 1. Exposure area: 400¡Á280
2. Dimension: 600¡Á350¡Á200
3. Weight: 12kg
4. Lamp wattage: 15w¡Á4
5. Lamp power: 60w/cm.
Advantages©U 1. Small bulk and low price;
2. Fit exposure for pad plate.
3. Light weight and easy to take.
|
|
Reisch & Associates is the place to look for pad printing equipment and technology.
Pad printers from full-size to tabletop machines, supplies and technical support, Reisch leads the way. We also offer a full line of inks, accessories, machines, equipment and printing pads of almost every imaginable shape and size.
Fully automatic pad printing system for printing on semiconductor strips
pad printing system on IC-strips
|
|
Overview
Discproducer (PP-100) is ideal for a wide range of markets including retail photo centers, photographers, service bureaus, church groups, education and more. It has all the features you need to print and burn up to 100 customized CDs or DVDs at a time. From its vibrant six-color inkjet printing and precision AcuGrip™ robotic arm to its easy-to-use software and unmatched reliability, with the Discproducer you'll get the high quality results you're looking for every time.
Product Features
- 100 disc capacity
- AcuGrip™ technology minimizes two-disc feeding
- Highest quality printing in its class with MicroPiezo technology
- Six individual, high capacity ink cartridges
- Low-ink sensor and LED for each cartridge
- Publishing speeds of up to 30 CDs and 13 DVDs/hour
- Compact, dust-proof rugged construction for top reliability
- Easy-to-use software with label templates
- Economical to operate and maintain
|
|
F.A-1 ( Fully Auto Round Screen Printing Machine)
FA Series are fully automatic Screen Printing machine for round Jobs in various sizes. This Machines is specially for one type of long jobs. It can print on Plastics Bottles, Caps, Filters and So many other round Products. It reduce the labour and Skill persons. We can make the machine as per customer specifications also. UV. Curing or Conventional Dryer is optional.
|
|
MACHINE SERIGRAFICA
STRUCTURE IN ALUMINUM, PRINTS FLAT AND CIRCULAR MOVEMENTS ELECTRICAL WORKERS AND TIRES
MODELS
550 ROUND PLAN AND f.to prints 550mm x 350mm max diam. 12
550 slider it prints flat 550 x 350
570 PRESS IN PLAN 700 X.500
Hour production: esteem 300 Pz/hr to 2 colors, 400 pz/hr to 1 color
|
|
PAD PRINTING MACHINE GTO COLIBRI’ EVO
A structure entirely in aluminum alloy. Electro-pneumatic operation. Control panel with pieces-counter, automatic cycle program with introducible pauses, displays with self-diagnosis. Double-ink-loading program (this function enable a greater cover on the printing area), speed control of single movement through flow controls. This machine is the best choice to print small objects in 1 color. Technical Sheet:
Printing color 1
Steel plate size 100 x 165 mm
Max printing area 60 x 60 mm
Closed ink tray Ø 70mm
Print speed 3000 cycles./hr
Maximum print thrust 400 N
Power 220 volt
Air pressure supply
6 bar
Dimension 54 x 46 x 24 cm.
|
|
APL MPP-1 (Manual Pad Printing Machine)
- All operations are by one Handle.
- High quality Printing.
- Easy setting and operations.
- Any type of object can be print.
- High output
- No Power and Air Compressor required
- Very low investment
- Suitable for in house and Job work printing
- Max. print area 75mm x 75mm
- Special size can be made on order
APL MPP 1 is a Manual Pad Printing Machine. This machine is operated with one handle, so many type of Jobs can print on this machine like Electronic, Auto, Electrical, Glass, Ceramics, Wood, Metal , Gift, Novelties, Pens, Rubber etc. The main advantage of this machine is it can print up to 800 impression per hour (Depend the size of jobs), And it is manually operate, No electric and air consumption required and easily carry to another place.
|
|
Pad Printers designed for production, business, or home are easy to learn, operate, and achieve perfectly registered repeat prints on almost any surface, article, or product, using fast drying inks - 10 to 20 seconds drying time. Printers are supplied with Magnetic Printing Plate Holder, Blades, Pads, Inks, basic accessories and full Instruction Material.
Plastic, Metal, Glass, Ceramic, Wood, Paper, Card, Fabric, Cotton.
Articles of all kinds and shapes can be printed or decorated using a RElSCH Automatic, Semi-automatic or Manual Pad Printer - Novelties, Souvenirs, Promotional Products, Leather and Wood Products, Advertising articles - Cigarette Lighters, Pencils, Pens, Give-aways, Metal & Plastic items, unusual and odd shapes such as Golf balls, Wine glasses, an EGG, a WALNUT or even a polished round stone paperweight!
|
|
APL SAF-7 (Semi Auto Flat Screen Printing Machine)
APL SAF series models are pneumatically operated and available in various sizes. This is a PLC controlled Machine with various features for easy operations of machines. Machine is equipped with Festo cylinders and linear guides X Y Table is given for quick registration. This machine can print on Paper, Plastics, Metal, Glass, Wood, PCB, membranes switch, Advertisement materials, Cloth and so many other flat products.
|
|
|
TOSH offers series of equipments that permit the steel plates or photopolymer plates making having different developing process (water or alcohol) in a very easy, fast and economic way.
|
|
|
|
