|
|
|
The cliché is made from steel or photopolymer upon client's request. Through the graphic analysis of any proposed logo or text, that is the creation of the graphic films, we provide steel engravings that are suitable for large runs, reliable in time for life, quality and conservation; or else photopolymer engravings that are quick and easy to prepare, cheap, for small and medium runs. For further information regarding this product contact our company directly.
|
|
|
|
|
|
Steal Plates
Packing©U Wooden case
Usage©U Used by Open-ink tray pad printer. Design and drawing document etched on the surface of pad plate . Installed it to the pad printer.
Technical Parameter©U 1 Thickness: 10.0-10.5mm;
2. Rouhness concentration ofSurface: 0.025
Production Advantage ©U High strength Bearing steel wrought; High wear resistance; Sophisticated structure to be etched fine imaging both streak and halftone; long life ensure low cost.
Use Method©U # Etching printing document to the surface of pad plate;
# Measure the depth ;
# Install into the ink tray of pad printer
# Testing after adding ink
Safe Caution©U Be careful to carry because of weight
Storage©U # Inject rust-preventative oil into the surface of pad plate;
# PVC or Nylon film package;
# Store in drying and shady place
1¡¢All plates are made of imported steel, high hardness, high density and high brightness.
2¡¢Can be etched with high-definition pattern, long using life.
3¡¢Various kinds, full range that covering plates of single side and both sides.
Specification£º
3"¡Á4"¡¢3"¡Á5"¡¢3"¡Á6"¡¢3"¡Á7"¡¢3"¡Á8"¡¢3"¡Á9"
4"¡Á4"¡¢4"¡Á5"¡¢4"¡Á6"¡¢4"¡Á7"¡¢4"¡Á8"¡¢4"¡Á9"
5"¡Á4"¡¢5"¡Á5"¡¢5"¡Á6"¡¢5"¡Á7"¡¢5"¡Á8"¡¢5"¡Á9"
6"¡Á4"¡¢6"¡Á5"¡¢6"¡Á6"¡¢6"¡Á7"¡¢6"¡Á8"¡¢6"¡Á9"
|
|
|
Beside of their automations, standard machines in the tampon printing and laser marking fields, TAMPOPRINT AG offers also a comprehensive accessories programme. Spray washing unit for cleaning of your printing unit, exposure units for cliché manufacturing, ink pumps for constant viscosity of your printing ink - more than 8000 articles are available from stock.
|
|
1.All pads are made of resin that import from Germany and France.
2 colors white and red, hundreds of shapes.
2.Our rubber pads has the good flexibility, the strong elasticity and the long service life which ensures high definition to flat, bend and irregular objects. Even if regarding the tiny design in the irregular superficial, it can guarantee the clear printing effect.
3. Mosstens the ink completely, it is easy to take off the ink and transfer printing, and the remaining printing ink is easy to elimiate.
4. Each kind of specification is complete, and may specially make according to the user specific requested.
5.We accept customized order with any shape.
Parameter:
Hardness from standard 15 to 40 degree. Usual pads including mid-, mid-soft, mid-hard, 20 and 25 degree
|
|
|
The Durst Theta 51 Dual - Theta 51 are completely digital lab systems based on Lambda laser printing technology, designed for heavy duty production and high quality demands in wedding and professional portrait labs. Theta 51/51 Dual consist of a high speed laser printer and an attached RA4 roll transport paper processor. With a resolution of 200 ppi or 400 ppi, both system can handle print sizes from 10 x 15 cm (4 x 6 in.) up to 50 x 75 cm (20 x 30 in.) and panorama prints, with or without borders, in packages, as a print series, etc. as individually cut images or on panels up to 5 m (15 ft), with the added advantage that all print formats match in colour and density.
|
|
Jota is a complete solution comprising the hardware, software and consumables, designed to create new, profitable business opportunities with attractive and stylish photo products.
Jota’s unique versatility allows various applications such as stylish photo books/albums in a variety of standard and bespoke sizes, double sided greeting cards, post cards, invitation cards, sales catalogues/brochures, .... just to mention a few of them!
Jota Book Maker
The newly developed Jota Book Maker is a cold glue binder that is designed especially for small volume production of book blocks 10 x 15 cm (6 x 4 in.) up to 30 x 40 cm (12 x 16 in.). Based on its unique technology, this system offers a very environmental friendly manufacturing procedure. The main advantage of the Jota Book Maker is that it produces perfectly lay-flat books. This allows images and graphics to cross the pages without missing image sections.
|
|
KERAjet is an ink-jet printing system developed by Ferro in the last few years. It is a 100% digital system applied to ceramic decoration through which you can create, modify, transmit and apply the design directly to the tile.
KERAjet system, already in full production use in many of the leading tile manufacturing companies in the world, represents a decorative system alternative to other traditional methods and opens new opportunities to creativity in ceramics.
|
|
|
|
|
|
Trans Tech On-Demand Digital Product Decorating:
Image LTTM Direct-To-Substrate Digital Printer
The Image LT from Trans Tech is a table-top, direct-to-substrate, flatbed digital printer for high-quality industrial product decoration. With full-color and programmable capabilities, it is an ideal entry-level unit for operations seeking to decorate multiple items in a single pass as well as one-up images on a wide range of substrates. Perfectly matched for the ad specialty and promotional products market, the Image LT makes full color imaging both user-friendly and profitable.
Main Features & Benefits:
Eight-Chamber Print Head: The Image LT is able to print
CMYK process color images on dark substrates by laying down two layers of opaque white as a base. Up to eight ink cartridges may be used: yellow, magenta, cyan, black, white (2) and clear (2). Clear overcoat cartridges may be used to seal and protect images for greater durability.
ColorSolv Ink Set: Specially formulated ColorSolv inks provide vibrant, full-color imaging in a single pass. Ink cartridges are hot-swap, field-replaceable components for added convenience.
Substrates: Its moving flatbed table enables substrate parts arrays up to 13 x 20 inches while clearance under printhead allows printing of substrates up to six inches in thickness. Examples of substrates successfully printed without undercoating include: ceramic tiles, PVC, metals, wood, acrylic, glass, electrical components, CDs, DVDs, and others. Note: all substrates should be tested for image receptivity by customer.
Optimized Resolution: Each ink chamber consists of 180 nozzles to achieve the highest optimized resolution of 5760 dpi.
|
|
Printex offers the UVAC series of high-quality exposure units for photopolymer printing plates processing, offering customers the convenience of plate making in their own shop.
The UVAC exposure unit features an adjustable digital timer, a reliable vacuum hold-down system with on-board vacuum gauge to provide vacuum status information at a glance. The built in safety interlock prevents accidental exposure to UV light.
UVAC units use widely available UV fluorescent lamps, which minimize maintenance costs and light quality changes. The vinyl vacuum blanket is durable, but removes easily for replacement if necessary.
For more information, please download the complete PDF brochure document below.
|
|
|
We produce printing pads. They are constructed in silicone rubber, of different hardnesses, depending on the type of pad printing, customised, determined by the print size; the pads can be of different sizes and shapes according to the print specifications. Further information on the type or measurements of the pads to be used is released directly by our company.
|
|
Reisch & Associates is the place to look for pad printing equipment and technology.
Pad printers from full-size to tabletop machines, supplies and technical support, Reisch leads the way. We also offer a full line of inks, accessories, machines, equipment and printing pads of almost every imaginable shape and size.
Complete ready to print pad printing packages available:
Pad Printer
Exposure Unit
Pads
Inks
Fixtures or Jigs
|
|
|
TOSH offers hundreds of standard shaped pads, available in a wide range of different qualities and hardness, realized with rubber which assure an excellent mechanical and chemical resistance. Special pads for special needs realized on demand.
|
|
|
|
|
|
Compact, electro-pneumatic pad printing machine:
- 2 - 4 closed ink cups (Ø 90, Ø 130 or Ø 160 or mixed)
- Pad cleaning
- PLC controlled
- Operated by touch screen panel
- Executed with 1 jig on a XY table on one position
- Executed with rotary table for two or four positions for automation with pretreatment, end-drying or ejection of the objects.
Direct connection of the table and/or jig to the machine without the need for additional wiring. When the option is connected and the machine is restarted, the new additional features are automatically enabled by the software.
The jig and rotary table are designed in this way that they allow the customer to control different types of jigs flexibly, without the need for reprogramming or rewiring the machine.
The rotary table option module is designed to make it easy for the operator to handle the products during the printing process.
The jig option module can control 2 cylinders (with end detections): one vacuum unit or product clamp and one part detection. The functionality of this can be fully programmed by the customer through an easy to use graphical interface.
|
|
More than 1000 standard tampons in 4 silicon materials.
5 standard models in shore A, delivery from stock made by TAMPOPRINT AG-
the original, world wide the highest tampon quality.
For “open”, “hermetic” and “rotary” tampon printing systems.
Further shore A and respectively shore 00 models as well as super dry silicon material and tampon forms available at any time as desired.
Tests and consulting will be made in our technology department.
Decades of experience will be at your disposal.
|
|
|
|
|
|
Specifications©U
1.Conveyer width£º500mm
2.Total wattage£º7KW
3.Wind fan wattage£º500W/380V
4.Conveyer motor wattage£º1000W/1P/380V
5.ConveyEr speed£º0~10m/min
6.Speed adjustment£ºstepless
7. Outer dimension£º2000¡Á660¡Á680mm(l¡Áw¡Áh)
8. Net weight£º180KG
9. Lamp wattage:2KW/380V¡Á3pcs.
10.Package: wooden case.
Advantages©U
1. Made by high temperature conveyer belt,
2. Famous brand motor drive,stepless speed adjustment.
3. High quality UV lamp to ensure exposure power.
4. Taiwan transformer,startup organ . long life to use
5. With convulsions function to remove quantity of heat in curing case.
Product Description:
Drying for variety of UV screen printing, pad printing, spraying UV ink processing, such as UV varnish, frosted, wrinkle, brilliant, refraction, enclosure spraying, single/double-sided green oil, offset supporting
Application range:
Used to make crystal pattern,frosted crystalam,colourful pattern ,etc,specia in the golden and silver card,metal ,glass and plastic ,etc,As well as,matched with offset printing for the UV drying of the offset printing ink.
|
|
|
|
|
|
The result of years of research and experience in the field of pad printing, this machine is able to print from 1 to 6 colours. Computerised electronic control with 4 axes, movements by means of motors and ball screws. Independent horizontal strokes of pads and sealed ink cups (or open plate-holding inktray) and vertical strokes of pads and piece-holder axes. The machine is designed for a wide variety of accessories giving very great control and for maximum printing precision, also over time. High productivity.
Features
- The machine structure is in electric-welded steel, enamelled and normalised to avoid deformation and vibration. Oven-enamelled with dual component paints.
- Machine movements and regulation are numerically controlled, using a touch keypad, easy to learn and simple to use. The operations are displayed on a backlighted LCD.
- The keypad in solvent-resistant material is mounted on a mobile arm for easy use.
- Capacity to store up to 30 work programs.
- Ability to program vertical axis height above the plate.
- Checks of machine controls via modem from our factory.
- Doctor blade support carriage and pad support carriage moved by linear guides.
- Vertical movement of pad by means of two ball screws to avoid bending.
- The machine complies with Machinery Directives EEC/89/392 & EEC/89/336.
|
|
Specifications©U
1.Max product width: 400mm
2.Max product length:320mm
3.Printing speed :1800~3000Pic/Hr
4.Conveyer speed: 0-10m/min
5.UV lamp power:4Kw
6.Total power: 7Kw
7.Power supply :AC 380V/ 50Hz 3-Phase
8.Machine size:(LxWxH)2100x750x1810mm
9.Machine weight:353Kg
Advantages: 1.Suitable for the UV Ink printing cure on round,oval,flat bottles and cylindrical substrate.
2.By adjusting its lighting angle, it can also be used in the UV Ink printing cure of flat or curved substrate;
3.Enclosure construction with conveyor. Apply half light (3KW) or full light (6KW) tubes, the distance is adjustable;
4.On the top of the machine equipped with an exhaust system, you can vent the inside heat of curing chamber .
|
|
|
|
|
|
Printex offers a large selection of silicone printing pads. Using the highest quality silicone, our pads offer excellent ink transfer to a substrate; our printing pads also provide superior tear- strength and solvent resistance.
pads
Round
The first shape designed for pad printing and one of the most common pads used today.
These pads minimize distortion while placing an image on to a cylindrical surface.
Loaf
Derived from the round pad, size limitations required the round shape to be squared-up on 2 or more sides, developing the loaf pad.
This narrower profile, allows the loaf pad, to be positioned in restricted areas. The design of the loaf pad allows for 2 or more pads to be easily grouped together.
Bar
Shaped like the roof of a house, these pads were designed for long narrow applications. Long lines of text are difficult to print with round or loaf pads due to the over-compression it would take to pick up the lengthy image
The bar pad allows for items, such as long lines of text, to be printed with very minimal compression on the pad.
Recommended for printing on flat surfaces, due to the shapes inability to minimize distortion on rounded surfaces.
Durometer (Hardness)
We recommend selecting the maximum amount of hardness that the product can support for the best possible print.
Printex offers 3 Standard Durometers:
SOFT (yellow backing) 45 shore
MEDIUM (blue backing) 55 shore
HARD (red backing) 65 shore
|
|
4-color pad printer with shuttle
Specifications©U
SPM4-150G
1.Max. plate size: 100¡Á150mm.
2.Max. worktable area: 150¡Á130mm.
3.Max. printing area: 85¡Á130mm.
4.Max. printing speed: 650pcs/h.
5.Printable color:4
6.Shuttle stoke: 125mm.
SPM4-200G
1.Max. plate size: 100¡Á200mm.
2.Max. worktable area: 160x130mm.
3.Max. printing diameter: 85¡Á170mm.
4.Max. printing speed: 650pcs/h.
5.Printable color:4
6.Shuttle stoke: 125mm.
Advantages©U
1.Microcomputer controlled operation;
2.Auto four digit counter built-in;
3.Ink covering by ink roller ;
4.Fully coin aluminium structure which is sturdy
5.Independent pad stroke and speed control;
6.Printing speed adjustable to meet with different needs;
7."Inking twice, printing once" to get better ink covering;
Machine Fittings©U
1. Four plates,
2. Four pads
3. Two blades
4. A tool box.
|
|
|
|
|
|
This high productivity machine is designed for a wide variety of printing uses. Rapid change: from open ink to sealed ink cups, printing from 1 to 4 colours. Axis movements controlled by microprocessor. Designed to allow for the addition of further accessories, even at a later date.
Features
- Machine structure in electric-welded steel, enamelled and normalised to avoid deformation and vibration. Oven-enamelled with dual component paints.
- Machine movements and regulation are numerically controlled, using a touch keypad, easy to learn and simple to use. The operations are displayed on a backlighted LCD.
- Keypad in solvent-resistant material.
- Ability to store up to 15 work programs.
- Axis registration by self-instruction and by co-ordinate dimensioning.
- High micrometric precision of plate-holder inktray.
- High micrometric precision of ink cups and doctor blades.
- Electro-pneumatic operation of horizontal and vertical axes.
- Machine in conformity with machinery directives EEC 89/392 and 89/336.
|
|
Sealed Cup Manual Pad Printer
Specifications:
Sealed cup manual pad printer
100MT
1.Plate area: 100×214mm
2.Dimension: 400 × 220 × 490 mm
3.Net weight: 30 Kg
4.Printing speed: 500pcs/H.
5.Max printing area:70×100mm.
6.Horizental Stroke:100mm
7.Vertical Stroke:60mm
Advantages: 1. Sealed Cup Manus operating .
2. Easy to change plate.
3. Lower price.
4. Coin aluminum structure.
5. Sealed cup is more environmental protection and ink saving.
Machine Fittings:
1.One pad
2.One steel plate
3.One operation manual.
|
|
|
|
|
|
This high productivity machine is designed for a wide variety of printing uses. Rapid change: from open ink to sealed ink cups, printing from 1 to 6 colours. Axis movements controlled by microprocessor. Designed to allow for the addition of further accessories, even at a later date.
Features
- Machine structure in electric-welded steel, enamelled and normalised to avoid deformation and vibration. Oven-enamelled with dual component paints.
- Machine movements and regulation are numerically controlled, using a touch keypad, easy to learn and simple to use. The operations are displayed on a backlighted LCD.
- Keypad in solvent-resistant material.
- Ability to store up to 15 work programs.
- Axis registration by self-instruction and by co-ordinate dimensioning.
- High micrometric precision of plate-holder inktray.
- High micrometric precision of ink cups and doctor blades.
- Electro-pneumatic operation of horizontal and vertical axes.
- Machine in conformity with machinery directives EEC 89/392 and 89/336.
- Indipendent doctor blade wagon
|
|
|
|
|
|
Sealed cup pad printer with shuttle
Specifications©U
PM2-100TG Pad printer
1.Max. plate size: 100¡Á200 mm;
2.Max. worktable area: 100x120mm;
3.Ink Cup diameter: ¦µ90mm;
4.Max. printing speed: 1000pcs/hr;
5.Printable colour :2;
6.Max printing area: 80¡Á80mm.
PM2-150TG Pad prionter
1.Max. plate size: 100¡Á250mm;
2.Max. worktable area: 130x140mm;
3.Cup diameter: ¦µ90mm;
4.Max. printing speed: 900pcs/hr;
5.Printable colors:2;
6.Max printing area: 85¡Á130mm.
PM2-200TG Pad printer
1.Max. plate size: 100¡Á300mm
2.Max. worktable area: 140¡Á180mm;
3.Cup diameter: 90mm;
4.Max. printing speed: 800pcs/hr;
5.Printable colors:2;
6.Max printing area: 85¡Á170mm.
PM2-250TG Pad printer
1.Max. plate size: 150¡Á350mm
2.Max. worktable area: 140¡Á180mm;
3.Cup diameter: 140mm;
4.Max. printing speed: 800pcs/hr;
5.Printable colors:2;
6.Max printing area: 130¡Á220mm.
Advantages©U
1. Double color printing, shuttle driven;
2. Microprocessor control;
3. Automatic 5-digit counter installed.
4. With coin aluminium structure frame, the machine is light and sturdy. .
5. The speed and the vertical stroke of the pad can be adjusted independently.
6. The extra function "twice inking, once printing" is designed for thicker ink film.
7. For different requirements, the working speed can be adjusted.
8. Sweeps forward and backward without pad falling down to prevent ink drying.
9. 2-color, 1-color printing available,
10.With air jet for fast drying.
11. Sealed cup to store and coating ink.
Machine Fittings©U
1. Two pcs plates,
2. Two pads
3. Two blades
4. One set tool box.
|
|
This machine has been designed for print sizes from 80 mm, with 90 mm Øeter sealed ink cup, two colours, for bench use or with base. Up to 7 electronically controlled speeds; with microprocessor-controlled pneumatic movement, manually adjustable vertical stroke. High productivity.
Features
- Solid structure in painted, electric-welded steel.
- Choice of seven speeds by means of selector switch.
- Manual adjustment of pad stroke.
- Keyboard with piece-counter, single or automatic cycle.
- Start-stop by pedal for each movement.
- Electro-pneumatic movements controlled by microprocessor.
- Object-holder table with cross movement.
- Pad-holder unit with cross movement.
- Machine conforms to Machinery directives EEC89/392 and 89/336.
|
|
|
|
|
|
|
Therefore, pads are made in many shapes, contours and densities to accommodate a multiplicity of product forms. A basic range of about eight pads offer excellent printing onto approximately 90% of the printed products shown here. Many articles can be printed relatively cheaply, and in many cases very profitably by comparison with traditional processes. With a manual machine, printing rates of up to 600 units or prints per hour are attainable. An automatic printer will offer in excess of 1200 prints per hour, manually fed. Printing rates, naturally are subject to many factors, such as, product texture, substrate, shape, ink type used, drying times, etc. Pad elasticity offers many possibilities - single and multi-color printing onto round, concave, convex, uneven, textured - almost any surface or substrate. Re-usable inks are available for fast drying applications - 10 to 20 sec. drying time. Also two-pot catalyst inks for more difficult substrates such as anodized or plated metals, polypropylene, polyethylene, polyamide, phenolics such as laminated plastics, Ceramics and Glass products.
|
|
|
|
|
|
Specifications©U
LC-PM1-100G Pad Printer
1.Plate area:100¡Á100mm/ 150¡Á100mm/200¡Á100mm;
2.Table area:200¡Á115mm
3.Max printing speed:1500pcs/h
4.Colour number:1
5.Max Printing area: 85¡Á90mm/ 130¡Á90mm/170*90mm.
LC-PM1-150G Pad printer
1.Max. plate size: 100¡Á150/150¡Á150/ 200¡Á150mm;
2.Max. worktable area: 200¡Á115mm;
3.Max. printing area:85¡Á130/130¡Á130/ 170¡Á130mm;
4.Max. printing speed: 1300pcs/hr;
5.Printable color quantity:1;
LC-PM1-200G Pad printer
1.Max. plate size: 100¡Á200/150¡Á200/ 200¡Á200mm;
2.Max. worktable area: 200¡Á115mm;
3.Max. printing area: 85¡Á170/130¡Á170/ 170¡Á170mm;
4.Max. printing speed: 1200pcs/hr;
5.Printable color quantity:1;
LC-PM1-250G Pad printer
1.Max. plate size: 100¡Á250/150¡Á250/200¡Á250/250¡Á 250mm;
2.Max. worktable area: 400¡Á150mm;
3.Max. printing area: 85¡Á220/130¡Á220/ 170¡Á220mm/220mm¡Á220mm;
4.Max. printing speed: 1400pcs/hr;
5.Printable color quantity:1.
Advantages©U 1. Microprocessor control for each function makes operation easy;
2.4-Digit auto counter built-in;
3.Coin aluminium structure ensures sturdiness operation;
4.Ink roller used for ink applying is easy to remove and clean;
5.Independent stroke and speed adjustment for pad up/down;
6.Auto balanced doctor blade ensures that ink can be scraped cleanly and completely;
7.Adjustable printing speed meets different printing requirements;
8.It is available that ink roller keeps working while pad doesn't lower down that so that ink will not easily become dry;
Machine Fittings©U 1. One steel plate;
2. One pad
3. Two blades
4. One set tool box
5. One english opearting instruction
|
|
|
|
|
|
It is updated on two colours pad printer with shuttle .overprint is more precision . Coin aluminum machine body ensure running stabilization.
Standards Certificate©U CE ISO9001-2000
Power Supply©U 110/220v 60/50Hz 1PHASE
Colour Painted ©U White colour
Specifications©U LC-PM2-100
1.Max. plate size: 100¡Á100 mm£»
2.Max. worktable area: 125¡Á200mm£»
3.Max. printing area: 85¡Á85mm£»
4.Max. printing speed: 1000pcs/hr£»
5.Printable colour :2;
6.Stroke of table shuttle: 125mm.
LC-PM2-150
1.Max. plate size: 100¡Á150mm£»
2.Max. worktable area: 125¡Á200mm£»
3.Max. printing area: 85¡Á130mm£»
4.Max. printing speed: 900pcs/hr£»
5.Printable colors:2;
7. Stroke of table shuttle: 125mm.
Advantages©U
1.Two-colour pad printer with shuttle ;
2.Each function controlled by microprocessor ;
3.Four-digit auto counter built-in;
4.Coin aluminium structure ensure solidity and durablity;
5.Ink roller flooding for easy install/uninstall ;
6.Independent pad up/down stroke and speed asjustment;
7.Auto balanced doctor blade available for efficient ink scraping;
8.Printing speed asjustable to fullfil various requirements;
9."Inking twice, printing once" for better ink covering;
10.Able to sweep forward/backward without lowering pad to avoid ink drying at intervals;
11.One or two colours printable;
12.Two-colour ink tray base adjustable separately for overprint adjustment;
13.Drying with auto air blowing for easy colour registration;
Machine Fittings©U 1. Two plates,
2. Two pads
3. Two blades
4. A tool box.
Package List©U LC-PM2-100
1. Package dimension:850¡Á580¡Á1460mm
2. Gross weight:140KG
|
|
|
|
|
|
6-Color Pad Printer with Conveyer
Specifications©U LC-PM6-150/18
1.Max. plate size: 100¡Á150 mm;
2.Max. worktable area: 90¡Á125mm;
3.Max. printing area: 85¡Á130mm;
4.Max. printing speed: 800pcs/hr;
5.Colour number: 6;
6.Air consumption: 330Litre/min(6bar);
7.Printing objects dimension:100¡Á140mm.
8.Conveyer stroke: 125mm;
9. Station number: 18
LC-PM6-150/22L
1.Max. plate size: 150¡Á150 mm;
2.Max. worktable area: 90¡Á125mm;
3.Max. printing area: 130¡Á130mm;
4.Max. printing speed: 800pcs/hr;
5.Colour number: 6;
6.Air consumption: 330Litre/min(6bar);
7.Printing objects dimension:100¡Á140mm.
8.Conveyer stroke: 200mm;
9. Station number: 22
Advantages©U 1.Total micro computer controlled operation;
2.Auto four digit counter built-in;
3.Ink covering by ink roller ;
4.Fully Coin aluminium structure which is sturdy;
5.Independent pad stroke and speed control;
5.Printing speed adjustable to meet with different needs;
6."Inking twice, printing once" to get better ink covering;
Machine Fittings©U 1. Six 4"*6" plates,
2. Six pads
3. Two blades
4. A tool box.
Ship Date©U By sea:
within 30 days after receive T/T OR
LC.
Testing©U Please provide:
1. 110V or 220V power supply.
2. 5-7 bar compress air.
3. Etching plate 6 pcs.
4. Fixture 18 pcs;
5. 50-100 pcs product samples.
6. Pad and thinner.
|
|
|
|
|
|
Independent-Press printing two colours pad printer
Specifications©U
PM2-150L
1.Max. plate size: 100x150mm£»
2.Max. worktable area: 130x140mm£»
3.Max. printing diameter: 90mm£»
4.Max. printing speed: 900pcs/hr£»
5.Air consumption: 110Litre/min(6bar)£»
6.Printable colors:2;
7.Dimensions: 830x615x1350mm£»
8.Weight: 127Kg¡£
PM2-200L
1.Max. plate size: 100x200 mm£»
2.Max. worktable area: 140x160mm£»
3.Max. printing diameter: 90mm£»
4.Max. printing speed: 800pcs/hr£»
5.Air consumption: 123Litre/min(6bar)£»
6.Dimensions: 931x613x1359mm£»
7.Weight: 137Kg¡£
PM2-250L
1.Max. plate size : 200 X 250 mm ;
2.Max. worktable area : 160 X 200 mm ;
3.Max. printing diameter : 90mm ;
4.Max printing speed : 800pcs/hr ;
5.Weight : 265kg ;
6.Air consumption: 153Litre/min(6bar)£»
Advantages©U
1.Two-colour pad printer with shuttle ;
2.Each function controlled by microprocessor ;
3.Four-digit auto counter built-in;
4.Coin aluminium structure ensure solidity and durablity;
5.Ink roller flooding for easy install/uninstall ;
6.Independent pad up/down stroke and speed asjustment;
7.Auto balanced doctor blade available for efficient ink scraping;
8.Printing speed asjustable to fullfil various requirements;
9."Inking twice, printing once" for better ink covering;
10.Able to sweep forward/backward without lowering pad to avoid ink drying at intervals;
11.One or two colours printable;
12.Two-colour ink tray base adjustable separately for overprint adjustment;
13.Drying with auto air blowing for easy colour registration;
|
|
|
|
