 |
  |
Multi-axis stepper and servo-motor motion control card PMAC2 UMAC Delta Tau
The Turbo PMAC2 UMAC CPU is intended to be used in a Compact UMAC Rack (CPCI), which is a modular rack format permitting...
 |
 |
Stepper motor driver ALLEGRO MICROSYSTEMS
SLA7024M, SLA7026M, and SMA7029M High-Current PWM, Unipolar Stepper Motor Controller/Drivers Features * Cost-Effective, Multi-Chip Solution * 'Turn-Key' Motion-Control Module * Motor Operation to 3 A and 46 V * 3rd Generation High-Voltage FETs * 100 V, Avalanche-Rated NMOS * Low rDS(on) NMOS Outputs * Advanced, Improved Body Diodes...
 |
 |
Stepper motor driver CANopen | SW Series Ever Elettronica
The SW with c0300 and c0400 firmware is a series of Full Digital drives configurable by means of PC software interfaces and easy to install in CANBus fieldbus networks (CANopen protocol) or in RS232/RS422 serial systems (Modbus protocol). Additionally to the...
 |
 |
Stepper motor driver EM5060 EM Microelectronic Marin
The EM5060 (previously named H5060) is a low power integrated circuit in HCMOS Silicon Gate Technology designed to drive bipolar or unipolar stepping motors. This device contains...
 |
 |
Stepper motor driver Analog Integrations
Manufactured with the standard bipolar process, the AIC2003 is a high-voltage, high-current 7-channel Darlington array, with each of the output transistors capable of sinking peak load current of 700mA and capable of withstanding at...
 |
 |
Stepper motor driver 24 VDC, 2.5 A | M325 3X Motion
Features - High performance, low cost - Supply voltage up to +24VDC, peak current up to 2.5A - 3-state current control technology - Automatic idle-current reduction - Suitable for 2-phase and 4-phase stepping motors - Optically isolated input signals - Pulse frequency up...
 |
 |
Stepper motor driver M Series Changzhou Fulling Motor Co., Ltd
M Series Driver for 2-Phase Hybrid stepper MOTOR l General Description M series drivers are high performance microstepping driver based on the most advanced technology in the world today. They are suitable for driving...
 |
 |
Stepper Motor Driver 300 Series The 300 series is a high performance, low cost micro-stepping driver that incorporates advanced surface mount and ASIC technology. The 300...
 |
 |
Miniature stepper motor driver 0.7 - 4.4 A, 24 - 45 V | CSD series RTA
RTA’s CSD series features low power bipolar ministep drives with STEP & DIRECTION interface (pulse train). It is characterized by a limited power range, small dimensions and easy setup. CSD series drives provide the traditional high quality and reliability of RTA, but also a very competitive price. All models are equipped with Chopper systems featuring high performance Mosfet power stage, microstepping...
 |
 |
Two-phase stepper motor driver 120 - 220 VAC | STAC5 Applied Motion Products
The STAC5 series stepper drives are powerful, two-phase, bipolar step motor drives for high-speed, high-torque applications. With high bus voltage and high current output, STAC5 drives provide even the largest step motors with enough power to get the job done. STAC5 stepper...
 |
 |
Two-phase stepper motor driver max. 7.1 A, 24 - 75 VDC KML Linear Motion Technology GmbH
Steppermotor Drives are compact microstep - powermodules for two-phase stepper motors with different input - configurations for the best adaption to the actual application. The microstep procedure enables a number of steps...
 |
 |
4 axis stepper motor driver max. 230 V AC | IMC4 imes-icore GmbH
The stepper motor controller IMC4 is used in machines of the series of ICP only.It is firmlymounted as plate in the machine rear wall....
 |
 |
Programmable stepper motor driver Xemo R Systec Elektronik und Software GmbH
Xemo R: Operate the machine directly via controller The stepper motor controller Xemo R with its all around enclosed 19 inch table housing is...
 |
 |
Closed loop stepper motor driver Super Microstep | TANGO mini Märzhäuser Sensotech
Small sized high-resolution stepper motor controller TANGOmini - the miniaturised and compact model type within the TANGO product family. On account of it’s small construction space it can...
 |
 |
Stepper motor driver LE4-40, LE12-140 series IEF Werner
Power Output Stage LE4-40 The LE4-40 is a power output stage for 2 phase stepper motors. It operates on the bipolar constant current principle. This operating mode enables...
 |
 |
Stepper motor driver 12 - 36 VDC, 0.15 - 1 A | SMM 110i HUBER
The SMM110i unit is a compact motor driver board designed for the operation of a bipolar 2-phase step motor. The operation current is variably adjustable. An integrated overheating...
 |
 |
Stepper motor driver 12 - 45 V, 0.5 - 4 A | EM-136 Electromen
FEATURES: • Bipolar chopper • Wide supply voltage range • Full-, half-, quarter-, and 1/8-step operation • 8-programmable phase currents • Auxiliary oscillator • Acceleration- and braking ramp • Self recovery fuse • Very high efficiency • Low heat dissipation • Rail mounting base available EM-136 is bipolar-chopper type stepper motor controller....
 |
 |
Microstepping driver ADVANCED MICRO SYSTEMS
Features • Integral controller - driver - power supply • Output current of 4 amps @ 40Vdc • Short circuit/over temp. protected •...
 |
 |
Microstepping driver max. 5 A | HP-Step.pro mechapro
1-channel microstep board 'HP-Step' Features: * 1 stepper motor channel * Connect up to 6 boards (4 axes) to PC printer port (with optional interface board or adaptor cable) * Easy adjustable...
 |
 |
DESCRIPTION back to top ^ AMCI Model: #SD7540A The AMCI SD7540A is a powerful stepper motor driver in a low cost, compact package. Externally powered from a 24 75VDC power supply,...
 |
 |
Two-phase stepper motor driver 4.2 - 14.1 A, 50 - 240 VDC | DSxxx Series LAM Technologies
High reliability and performance, compact size and low cost have been the guidelines followed to develop the drivers of DSxxx series suitable for DIN rail mounting. Using the last electronic components generation and the SMT technology...
 |
 |
Two-phase stepper motor driver 1.1 A, 24 V | TMCM-612/SG Trinamic Motion Control GmbH & Co. KG
TMCM-612/SG Description 6-axis controller/driver 1.1A/24V + data aquisition The TMCM-612/SG is a six axis 2-phase stepper motor controller and driver module with a high performance data acquisition part. The integrated 8 channel 16 bit ADC converter can be programmed to do a step-synchronous input voltage scan and store values at a high data...
 |
 |
4 axis stepper motor driver max. 20 A, 24 - 80 VDC | PRESTO Series Optimal Engineering Systems
This motion control system is capable of moving a group of motors via controlling the movement of a joystick or trackball. The...
 |
 |
Multi-axis stepper and servo-motor motion control card Euro404, Euro408 Trio Motion Technology
The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be used as pulse and direction with stepper or servo drives or they can operate as a simulated encoder output. When configured as feedback they can be either incremental...
 |
 |
Stepper motor driver Microchip Technology
The MTS2916A motor driver is an integrated circuit able to drive both windings of a bipolar stepper motor or bi-directionally...
 |
 |
Stepper motor driver 0.3 - 6 A Telco
TelcoMotion provides multiple choices of stepper drivers. There are 2 phase AC driver, 2 phase DC driver,...
 |
 |
Multi-axis stepper and servo-motor motion control card NAVIGATOR® Performance Motion Devices
MOTION CONTROL IC: ADVANCED MOTION CONTROL PROCESSORS, MOTOR SPEED CONTROL MOTION CONTROL > Motion Control ICs PMD's Motion Chip Advantage Our motion processors provide high-performance motion control of servo microstepping motors while offering the flexibility of an IC-based building block. This chip based approach...
