|
|
AGIPRO - MIXEL Agitator for container
Are you looking for THE economical and efficient tool to mix liquids into 1000 litres cube-like containers?
The set < Agipro 125 quick agitator with fixing holder for container › is made for you.
The fixing holder has been especially designed to enforce stability of the AGIPRO agitator and to maintain it on a 1000 litres cube-like container in total safety. You can use Agipro 125 quick agitator for mixing, homogenization, storage or suspending solids into liquid.
The MIXEL agitator AGIPRO 125 (or AP 125) is designed to mix liquids into 0.5 to 1.5 m³ tanks.
Technical specifications:
- MIXEL TT type propeller – diam. 125 mm
- Motorization 0.75 Kw at 1500 rpm
- Agitation shaft length 1200 mm
|
|
Made in lengths of up to three meters, complete with PVC support plate. They may be supplied, with axial-flow or centrifugal flow, with a rotation speed from 2800 to 600 rpm on the work they have to perform.
Due to their constructional detail they are suitable for use in purification and neutralisation plants and for the mixing of reactants, additives and flocculants in tanks with volumes of up to 20 m³.
|
|
Metso Minerals Attrition Scrubbing machines are simple, yet highly efficient units for scrubbing particles at densities of 70 - 80% solids.
Two opposed Helix type propellers on each shaft force particles against each other, resulting in intense scrubbing, polishing and disintegration. Efficiencies generally increase with and increase of the density of the pulp, as particles have more frequent grain to grain contact. The twin propellers, mounted on a shaft inside a tank, are supported by a heavy-duty steel structure. Shafts are coupled to either gearbox or spindle bearing drives. An opening in each cell partition allows pulp to flow through the machine. Machines are usually supplied with two, four or six cells, with each cell ranging in volume from 4 to 9900 liter’s. (1cubic foot to 359 cubic foot). Odd cell arrangements are also available as custom supply
|
|
SPECIAL MIXERS
with PP - PVDF - AISI 316 IMPELLER and SHAFT
with plastic impeller and shaft, designed to process aggressive chemicals
with gear drive for high-viscosity liquids, available with plastic or metal impeller and shaft
with AISI 316 stainless steel impeller and shaft
POWER RATING:
from 0.13 HP to 0.75 HP
SHAFT LENGTH:
PP and PVDF from 600 to 1400 AISI 316 from 850 to 2000
MOTOR:
direct or gear
220, 380 or 12 V from 35 to 940 rpm
WEIGHT:
from 5 to 14.5 kg
|
|
Agitator for digestion or methanization tank
Sludge coming from waste water plants is full of methane.
In order to reduce volume of sludge (30 to 40%) and to deodorize it, sludge is transformed inside a digestion or methanization tank.
An agitator turns in this heated tank, separating methane from sludge. This methane is collected at the top of the tank and used to heat tank.
Then, digested sludge is dehydrated and used to fertilize agricultural soil.
MIXEL has designed a new agitator for equipping digestion or methanization tank:
- vertical agitator, with double level of propellers (TTF profiles propellers, with converging edge to avoid aggregation of tows;
- agitation shaft up to 20 m
- hydraulic seal
- Guiding turret.
MIXEL has equipped up to 5000 m³ digestion tanks, in France, Algeria and Marocco.
|
|
MIXEL - Agitator for preparation and production platform
If you firm designs and makes:
- Machines for preparing flocculants, reagents, coagulants..., for blending or for measuring out...
- Platforms for making chemical products, cosmetics...
And if you are looking for quick, economical, easy to handle and to integrate agitators, the agitators of the new range Agipro from MIXEL meet those criteria.
A SMALL RANGE: 4 sizes of agitators for mixing into 0.5 to 8 m³ tanks
Agipro AP 125 - Tank from 0.5 to 1.5 m³
Agipro AP 250 - Tank from 1.5 to 3 m³
Agipro AP 400 - Tank from 3 to 5 m³
Agipro AP 600 - Tank from 5 to 8 m³
3 VALUE ADDED ACCESSORIES
Clamp for fixing agitator on tank edge
Square flange for fixing agitator on top of tank
Fixing holder for 1000 litres storage tanks
|
|
Technical description:
• Mounting and dismounting of the agitator when the wine tank is full after connection on your ball valve. The shaft has to be slided inside the tank. The propeller fans out when rotation.
• Motor : 1.1 kW, 1.5 kW or 2.2 kW-230/400V-50Hz
• Sealing : mechanical seal
• Handiness : carrying handle
• Integrated on/off switch on motor electric terminal box
• Hands safety device
Design, manufacturing and tests in our workshops.
|
|
|
|
|
|
MIXEL - New range AGIPRO - Standard, practical and economic agitator. Four different sizes of 316 L stainless steel mixers are avalaible, for tanks from 0.5 to 8 m³.
A range of multi-purpose, optimum efficiency, easy to handle and easy to install agitators.
THE PURPOSES of AGIPRO quick mixer:
- all liquid mixtures, homogenization, suspending solids
- for tanks from 0.5 to 8 m³
- for products of 1 to 4000 cps viscosity
- for all industries (water and effluents treatment, food processing, chemistry, paper industry...)
- preparation of reagents, paint and varnish, coagulation, neutralization.
THE RANGE - How to choose the right AGIPRO quick agitator?
Recommendation for product viscosity = 1 cps
- 0.5 to 1.5 m³ tank-- AP 125 /0.75 Kw at 1425 rpm /propeller diam. 125 mm
- 1.5 to 3 m³ tank -- AP 250 /0.37 Kw at 280 rpm /propeller diam. 250 mm
- 3 to 5 m³ tank -- AP 400 /0.55 Kw at 145 rpm /propeller diam. 400 mm
- 5 to 8 m³ tank -- AP 600 /1.1 Kw at 138 rpm /propeller diam. 600 mm
ACCESSORIES - What to do with?
- stainless steel clamp for fastening agitator on tank edge (for AP 125, AP 250 and AP 400 only)
- square stainless steel flange for fastening mixer on top of the tank (available for the four sizes)
- fixing holder (special galvanised steel support) for fastening agitator on 1000 litres cube-like container (for AP 125 only)
DELIVERY TIME
15 days from reception of both order and payment
Phone to our technical and sales department at +33 (0) 4 72 52 18 18 or through contact@mixel.fr
|
|
|
|
|
|
AGIMAG - Magnetically driven agitation - for ultimate leak tightness
Designed to be cleaned and sterilized (in place or in autoclave) and build with FDA components, the AGIMAG® agitators from MIXEL are optimized for all the pharmaceutical, cosmetics and food processing.
INDUSTRIES CONCERNED
Pharmaceuticals, food processing,
light chemicals, cosmetics
APPLICATIONS
* storage
* mixing low viscosity products
* fermentation
PERFORMANCE
From 10 litres to 10,000 litres (enquire for higher
capacities)
High pressure (up to 16 bar)
Up to 150°C
FDA approved MATERIALS
316 L stainless steel polished to Ra < 0.2µm electrolytic
polishing
Bearing blocks made from silicon carbide with no free
silica (other configurations please enquire)
POWER
0.18 to 2.2kW
Transmission by magnetic coupling
MAJOR INNOVATIONS
- tachometer built into agitation head (cleanness,
control, safety by instant stopping of drive)
- clutch device for the magnetic coupling
(maintenance operations made easier)
- compliant with EHEDG cleanability criteria.
|
|
AGIPRO - Portable agitator with clamp
Are you looking for a vertical, economical, light and practical agitator, easy to handle from a tank to another?
The set MIXEL ‹ Agipro quick agitator with clamp for fixing on tank edge › is made for you.
The fixing clamp has been especially designed to be heavy-duty and for safe use. It can be easily fixed on tank edge and does not vibrate when agitator works.
This clamp fits to the following sizes of agitator:
- Agipro AP 125 - Tank from 0.5 to 1.5 m³ - 0.75 Kw at 1500 rpm - weight 15 kg
- Agipro AP 250 - Tank from 1.5 to 3 m³- 0.37 Kw at 280 rpm - weight 20 kg
- Agipro AP 400 - Tank from 3 to 5 m³ - 0.55 Kw at 145 rpm - weight 30 kg
|
|
It is the agitator the more installed, generally on the top of the tank (as showed hanging configuration or associated to a bottom bearing), either on the bottom of the tank.
It is composed of :
. one driven head out of the vessel
. one agitation axis with one or several stages of agitating parts
The picture shows a configuration type hanging which in function of the case (constraint regarding to kinematic chain) has to be associated to a bottom bearing.
The interface driven head / vessel can be equiped with different type of sealing :
. mechanical seal
. gasket
. drip
. stuffing box
Design, manufacturing and tests are effectuated in our workshops.
|
|
Chemineer Agitators are robust, simple and designed for ease of maintenance. The drive has a minimum of moving parts, while NC machining of the housing and the subassemblies ensures trouble-free interchangeability and precision parts mating.
Engineered for the ultimate in process compatibility, Chemineer manufactures a range of agitators to suit almost all applications
Available in drive sizes from 0.25 to 1,000 kW - even more for specialized applications. A wide selection of mounting methods, materials of construction, shaft seals, shafts, impellers and accessories can provide the best turbine agitator for virtually any process.
|
|
In the delivery state (clamping ring barrel) the material is prepared and conditioned for use and transfer to the spray gun. Due to the pneumatic lid lifter, an empty barrel can be replaced easily with a full one. System components:
- Lid for attaching apparatus
- Pneumatic lid lifting device
- Agitator (electric or pneumatic powered)
- Pump with material filter
- Agitator switch off when lid is lifted pneumatically
- Compressed air fittings
All agitators are tested and certified in accordance with ATEX 94/9/EC. Versions without explosion protection are also available.
10 years of delivery guarantee for spare parts
|
|
Differents types:
Direct Drive Agitator - Air Powered direct drive agitator assembly with 1/2 hp air motor and a three bade propeller to keep materials in suspension even with high solids.
Indirect Air Motor Drive - Standard duty, smooth running with gear reducer, 1/2hp, 15:1 ratio, 20 to 120 RPM. Inc throttling valve, fittings and hoses for connection to air supply on tank lid. Air consumption is approx 6CFM @ 50RPM.
Reciprocating Air Motor Drive - 180° reciprocating action provides excellent agitation of all types of materials. Particularly important for waterborne shear sensitive materials. Very low air consumption
|
|
(speed rotating electric-agitators removable and swivel angle)
Advantages of those agitators : they will help you, not only to resolve your mixing problems, but will make their maintenance easier.
1. EFFECTIVE
- mixers claimed by satisfied customers
2. ROBUST
- designed to long with time resistant components
3. WITHOUT MAINTENANCE
- 20 000 h of operation without maintenance
- lubricated bearings for life
4. THREE STANDARD MODELS
- power 0.37 kW, 0.5 and 0.75 kW
5. EASY SETTING OF THE MIXER ON THE TANK
- claw device to tighten as vise principle
6. FAST DISASSEMBLING/REASSEMBLY OF THE SHAFT
- tightening with chuck
7. SHAFT AND PROPELLER
- stainless steel or any other material on request
Design, manufacturing and tests in our workshops.
|
|
|
FLUX offers a complete range of mixers for agitating, mixing, stirring or homogenizing operations within containers of 30 to 30.000 Litres. The complete range of mixers is based on a modular design, allowing the user to select the individual component parts to meet his specific requirements.
|
|
Centrifugal turbine agitators designed for proper agitation of water solutions or lower viscosity liquids in tanks with a capacity between 100 and 300 L/H (26-80 GPH).
It features a double action centrifugal turbine:
Three long distance radial jets, with sweeping effect arround the turbine to produce the rotation of the liquid.
Three axial jets to stir the bottom and create a vertical stream.
|
|
Standard range: HELISEM®
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
Custom-made range: ROBIN®
The ROBIN® line of customized mixers is ideal for complex processes running in extreme conditions, best suited to the requirements of hydrometallurgy, the chemical and petrochemical industry, and fine chemicals. The list of possible applications includes alumina refining, fermentation, polymerization, phosphoric acid, resins and high viscosity products, to name but a few.
Pressure up to 250 bar
Temperature up to 350 °C
Volumes from 0.010 m3 to 10,000 m3.
|
|
The IKA-ROTOTRON is a jet flow agitator. The jet tube cares for intensive, directed flow. Therefore this agitator is especially suitable for mixing of high-viscous media, even in rectangular containers. Moreover this agitator is especially suitable for submerse incorporation into extremely big containers. This makes the use of extremely long and big agitators of common type unnecessary.
The IKA-TURBOTRON construction series does not have a fixed jet tube. Instead of the jet tube different mixing tools like propellers, turbines or toothed disks can be chosen according to the respective application.
|
|
The ROBIN® line of customized mixers is ideal for complex processes running in extreme conditions, best suited to the requirements of hydrometallurgy, the chemical and petrochemical industry, and fine chemicals. The list of possible applications includes alumina refining, fermentation, polymerization, phosphoric acid, resins and high viscosity products, to name but a few.
Pressure up to 250 bar, 350 °C.
Volumes from 0.010 m3 to 10,000 m3.
|
|
All-stainless construction helps eliminate the potential for contamination in critical sanitary applications.
300 series stainless motor, gear and bearing assembly
Available in 1725-rpm direct drive, and 280- or 350-rpm gear drive
Fixed-mounted mixers available in various speeds
Washdown-rated, inverter-duty motors from 1/2 to 3 HP
Oversized bearings with L10 life exceeding 100,000 hours
Permanent sealed lubrication
Flexible motor coupling
Solid 300 series stainless steel flanges
|
|
Agitators
This is one of the most comprehensive agitator lines in the industry, including fast seal removal, coaxial with independent drives, magnetic drive for non-polluting production and sterile product treatment, side entry, and compact designs. Many options are available, including standard or customized agitators, as well as systems.
The manufacturer is one of the world's leaders in agitator engineering and is 9001 certified.
|
|
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
|
|
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
|
|
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
|
|
The new Enhanced Classic Line (ECL) mixer gives our customer an even stronger and more flexible product. Never before has there been a range of mixers offering so much quality and value.
Direct- and gear-drive mixers for a wide range of mixing applications
Direct-drive mixers are recommended for dispersing powders and small batch mixing
Gear-drive mixers feature two available lower speeds and higher torque for use with larger batches and a range of viscosities
Larger output shaft bearings for longer shafts and longer life
Positive chuck grips the mixer shaft to prevent unintentional shaft release
|
|
SunKaier SK300 series utilizes a double reduction helical/bevel gear or singlereduction bevel gear reducer to provide a rugged, reliable drive with high shockload capacity for years of trouble-free service in the most challenging applications. Housings are close-grained cast iron with oversized output shafts for high torsional and bending stresses and includes drywell construction. Foot mounted or C face motors are used.
Horsepower Range: 0.37KW to 4.0KW
Speed Range: 50 to 280 rpm
Reduction Type: Helical/Bevel
|
|
From 30KW to 1000KW and 15RPM -300RPM
Ideal for medium-capacity mixing needs, the rugged RAM MDX has been performance-proven through years of operation in a diverse range of demanding installations.
|
|
Adjustable Agitators
VMI Rayneri has made a specialty of adjustable mixers covering a wide set of applications ranging from laboratory agitations to industrial mixers of small and medium capacities. Coupled with a wide choice of turbines and propellers adapted to the desired processes, these agitators are designed to reconcile maximal ergonomics for the operator, a very high level of safety and impeccable mixing quality.
Turbotest is the bench agitator par excellence. It is the essential tool for any bench testing, formulation, quality tests, new product development, and new processes and formula improvements. It has no equivalent for scaling tasks from the laboratory to industrial manufacturing.
The Mobimix range, consisting of simple agitators on lifting frames, is specially designed for industrial applications of small capacities as well as for pilot mixing.
|
|
|
|
|
|
Vessel Process
VMI-Rayneri offers a wide range of manufacturing stations (formulation bowls, dissolution bowls, suspension bowls, storage bowls, heaters) aligning a blending system at 1, 2 or 3 movements as required and a bowl equipped with specific functionalities: - vacuum / pressure- heating / cooling- spring balance
The simple agitators are made from the range of VMI-Rayneri agitators, according to the specificity of the mixture to achieve.
The product agitations of more complex rheology and/or implementing thermal exchanges can be achieved by systems of the Multimix line.
The products requiring a simultaneous action of circulation and shearing effects can be obtained from the Trimix range of machines, combining the effect of a central agitator, a bowl scraper and an emulsifier/disperser in bottom ofvessel.
The all stainless steel Heaters proposed by VMI-Rayneri, designed for melting of blocks, sequins, etc..., integrate an electrical heating as well as an agitation of anchor type promoting thermal exchange. The ergonomic design of these heaters allows easy block loading, and they can evolve into real temperature-controlled bowls, integrating an optional disperser or a cooler.
|
|
|
|
