|
|
S-Type External Pneumatic Ball Vibrators develop frequencies higher than 580 Hz (> 35,000 r.p.m.) and they are used wherever powdery materials have to be moved. S-type Ball Vibrators are installed on bins to prevent bridging or ratholing, and for the improvement of material flow on chutes, screens and vibrating tables.
S-type Ball Vibrators consist of an anodized aluminium body inside which a steel ball rotates on a specially hardened and ground steel ring. For operation a 2/2-way-valve and filtered compressed air are required.
- Maintenance-free
- Operating temperature: 32°F to 390°F
- Oil-free operation
- Great acceleration
- High centrifugal force
- Low noise level
- Low air consumption
- Standard ATEX ExII3D certified
|
|
|
From 4mm to 24mm diameter, these vibration motors were designed for mobile phone and pager silent ringing functions. Since then they've found many additional applications including BEAM robotics, general robotics, pda / mobile phone development and data transponders
|
|
|
Unbalanced motors are suitable as drives for vibration conduits and pipes, vibrating and bar grate filters, vibration funnels and vibrating tables, worm conveyors or water removal equipment. As vibrators for silos, bunkers, deflection grills, downspouts, chutes, filter, filling plants, they guarantee a smooth material flow. Whether in gravel drainage, screening, dedusting or filters, with the conveying of large volume quantities or in case of special tasks involved in process engineering, such as e.g. concrete compaction, dosing and material loosening, AViTEQ unbalanced motors perform their work reliably in every case. Take advantage of our more than 50 years of experience in vibration conveying technologies in all sectors.
|
|
|
The MVSS stainless steel series vibrators are characterized by their total protection from liquids, dusts, aggressive agents and contaminants, thanks to the stainless steel casing and external components.
|
|
VARLIK vibromotors are three-phase asynchronus motors which have eccentric wights fixed at both sides of the rotor shaft. The rotating shaft causes certrifugal force. This certrifugal force can be adjusted by moving the weights.
VARLIK vibromotors are dust and water tight. Can be mounted in any position. Reliable for heavy duty applications. Bearing lubrication on 3000-5000 hour schedule is the only required maintenance.
VARLIK vibromotors are available in 0.18-5.5 kw power and 900, 1500, 3000 rpm on = 380-volt 3-phase.
VARLIK vibromotors are suitable for vibrating screens, hoppers and bunkers, feeders ard compacting devices. Ensures high efficiency with low electricity consumption.
|
|
The electric motor is the heart of the drive. ABM electric motors are induction motors of a squirrel-cage design. This design of motor has become the most important type of industrial drive units.
An ABM electric motor offers you:
complete maintenance-free operation
energy-saving with approx. 90 % efficiency
an environmentally friendly type of drive (compared with internal combustion engine hydraulics, pneumatics)
extremely reasonable cost/performance ratio
ABM motors are available as a standard motors or as drive motors for geared units.
ABM Rotary Current Motors
construction size 56-180
output up to 30 kW
system of protection up to IP 66
rated speed up to 3000 min-1
constant speed : 2-, 4-, 6-, 8-, 12-, 16-pole
pole-switching: 4/2-, 6/2-, 8/2-, 12/2-, 16/2-, 8/4- or 8/6-pole
standard mounting arrangements: B3, B5, B14
ABM Single-Phase Motors
frame sizes 56-90
ratings up to 3 kW
split phase: start and run capacitor, auxiliary windings etc.
standard mounting arrangements: B3, B5, B14
|
|
Copal is developing products meeting users' specialized needs from mobile phones and humanoid robots to FA equipment. Our product keys are compactness, high power, high accuracy, high response, low energy consumption, and long life. The market for the compact, high-performance motors with low environmental load is growing, with Copal as a leading manufacturer.
Vibration motors
Copal is a top world manufacturer of vibration motors for mobile phones, providing product series ranging from ultramini cylindrical to low-back coin motors, expanding applications to game machines and toys.
|
|
2 POLES - 3000 Rpm.
4 POLES - 1500 Rpm.
6 POLES - 1000 Rpm.
8 POLES - 750 Rpm.
Voltages :
- DC supply: 12 / 24 Volts
- Single phase 115V to 240V - 50/60Hz
- 3 phases: 220V to 660V - 50/60Hz
|
|
| ... products without technical information |
| |
Large gas and diesel engines are used for many purposes, i.e. trains, ships and for local power generation. In all cases, foundations for these engines must be both economical and effective. Elastic support of this equipment meets these requirements.
During operation, some of the oscillating forces and moments generated by the engine are balanced internally; remaining forces and moments are transmitted into the foundation.
|
|
- Test lab with engine and chassis dynometers
- Computer simulation
- In-house material compound and development capabilities
- High tech solutions provide superior performance:
- Hydro-bushings
- Hydro-mounts
- Rubber-to-metal bonding
- Design expertise matches solution to problem
- Facility location: Milan, OH
- Certifications: ISO 9001
|
|
Cushyfoot™ mountings have two rubber elements, used
in shear and compression, to provide excellent stiffness
characteristics for the isolation of a wide range of vibration
frequencies.
There are three sizes, 17-0290 for loads up to 230 kg per
mounting, 17-0213 for loads up to 1250 kg and 17-0346,
which will carry up to 1280 kg per mounting, but will
provide up to 16 mm static defl ection.
The Cushyfoot™ mounting has the following features:
• A wide load range from 50 to 1280 kg.
• Stamped identifi cation plates for product identifi cation.
• Strong castings for safety and reliability.
• Dissimilar horizontal stiffnesses give optimum vibration
isolation and motion control.
|
|
|
|