|
|
Waste skips tilting -
Dump trucks of type "VID-BOX"
Volume 600,900 and 1200 liters
For the collection of all types of waste
Use with a device of discharge taken again on the forks of the forklift truck
options:
wheels, lid, complete sealing, double bottom, valve of draining, marking, galvanized hot, etc .......
|
|
Inclined bottom bucket, Capacity from 500 to 2500 liters, integral opening of the front face; Carry equipped with 2 jacks to gas maintaining the door in open position; Order lever with double locking with latch of safety; FRENCH MANUFACTURE
OPTION: wheels, lid, hot galvanization, marking.
The tilted bottom bucket is ideal for the paperboard scrap, plastics ..... the emptying of the bucket can be done without the assistance of a lifting truck; Special achievements on request!
|
|
From an idea to a container-system
In recent years things have changed greatly in the waste-disposal sector. Less waste is disposed and more is recycled. However recycling only makes sense from an economic and ecological point of view if the substances to be recycled are available in large and – more important - unmixed quantities. This demands the job of sorting out the waste from the individual valuable substances and placing them in special containers, which should be done directly on location. That is exactly where KLIKO containers come into their own. Container systems for dealing with waste in all sectors whether centrally or on location – no matter whether the materials are to be recycled or disposed of.
A wide range of two- and four-wheeled containers of various capacities are available to our customers.
To maintain Craemer's stringent standards, only high quality material is used for the production, whether plastics or metal.
Craemer provides a complete range of different containers for a variety of disposal systems.
The high quality of our wastebin system confirms the certification according to DIN EN 840 considering as example of our "MGB"-line.
|
|
Vented kitchen caddies of the STELO series are designed to reduce moisture and prevent the build up of anaerobic bacterial activity of the organic waste. Unpleasant odours are avoided and moisture is evaporated by transpiration through the compostable liner and perforated lid, walls and ribbed base.
This kind of bins, combined with a composable/biodegradable bag (Mater-Bi, etc.) allows to reach 4 main targets:
reduces unpleasant smells caused by anaerobic bacterial activity;
Avoids the build up of liquids at the base, through evaporation;
Decreases the weight to be collected, by reducing moisture by up to 30%;
Improves the quality of segregation, collection and the composting process.
|
|
Sartori Ambiente helps you recycle more with the new Urba plus, a new generation of door-to-door collection containers.
2 or 3 containers can be securely stacked in the space of 1,
in a stable tower. Filling is easy with the lid flap, without the need
to move the bins.
The full capacity of the bin can be utilised with improved efficiency,
easy handling and better quality of material segregation.
Urba plus maintains all of the features of other Urba containers, with a front flap and vertical handle with lid locking mechanism.
Technical characteristics:
40 litres
Made of recyclable PP or recycled PP
Stabilised against the effects of UV light
Resistant to chemical detergents and biological matter
Double hinged lid with lid locking mechanism
Double hinged front flap on the lid allows filling when containers are stacked
Ridged lid recess for safe stable stacking
Customizable with hot foil printing
Customizable with IML label
PP recycled content as an option
|
|
Wheeling closed container, designed for collect and transport of wate papers, packaging, cardboards, shrink wrap.
Indicated for light or voluminous materials, loading charge up to 500 kg.
This model features a metallic wheeling base and a front collapsible mid panel.
Dimensions: base 1000 x 1200 mm, non-stackable container, Useful height 1500 mm.
|
|
Collect all your shop rags and work towels in one safe can. Also great for contaminated wipes and cloths.
Multiple sizes and applications available.
|
|
| ... products without technical information |
| |
Waste skips tilting -
Dump trucks of type "VID-BOX"
Volume 600,900 and 1200 liters
For the collection of all types of waste
Use with a device of discharge taken again on the forks of the forklift truck
options:
wheels, lid, complete sealing, double bottom, valve of draining, marking, galvanized hot, etc .......
|
|
Inclined bottom bucket, Capacity from 500 to 2500 liters, integral opening of the front face; Carry equipped with 2 jacks to gas maintaining the door in open position; Order lever with double locking with latch of safety; FRENCH MANUFACTURE
OPTION: wheels, lid, hot galvanization, marking.
The tilted bottom bucket is ideal for the paperboard scrap, plastics ..... the emptying of the bucket can be done without the assistance of a lifting truck; Special achievements on request!
|
|
Top-loaded bin compactors
ORWAK offers a range of bin compactors suitable for compaction into standard two- to four-wheeled plastic/steel bins in the capacity 240-1100 litres.
ORWAK 4100 is constructed for four-wheeled bins and ORWAK 5070 is a flexible combination of a multiple-chamber baler and a bin compactor.
ORWAK’s LE TL and LE FL are based on an ingenious modular system and made from maintenance-free aluminium. Waste can be compacted into standard two-wheeled bins or into plastic bags.
|
|
2609 Lid for 2610 BRUTE® Container
Durable, heavy-duty containers for a variety of uses.
All-plastic, professional-grade construction will not rust, chip or peel; resists dents.
Strong, snap-on lids are available for secure, stable stacking.
Built-in handles allow easy, non-slip lifting and anti-jam nesting.
Gray, White and Yellow are USDA Meat & Poultry Equipment Group Listed and assist in complying with HACCP guidelines.
Certified to NSF Std. #2 (gray, white and yellow) and Std. #21.
9W21 BRUTE® Rollout Container
Easy mobility for general refuse collection and material handling.
Heavy-duty, one-piece handle provides large, strong grip area.
Ground-hugging base is designed for stability even in high winds and on uneven surfaces.
Molded-in, reinforced lift points help distribute loads evenly.
Inset wheel position helps prevent damage to walls and doorways.
Molded-in foot tilter helps maneuver heavy loads.
One piece body construction provides superior strength and durability.
|
|
Stock batteries SB 60 is a steel receptacle which makes it possible to integrate a polyethylene case of 600 liters for the storage of the worn batteries (60 to 70 batteries). Tubular steel structure; Metal lid rise on 2 compass-gases with handle of opening, lock 2 points and keys. Pastes of fixing on the ground
OPTION: case polyethylene.
SB 60 protects the batteries from the bad weather thanks to its metal lid rise on 2 compass-gases and avoids especially the flight of the batteries since it is equipped with a lock 2 points. it has moreover of the pastes of fixing to avoid any inopportune displacement. Its anti-corrosion completion and painting polyurethane protect it perfectly from the bad weather and rays UV.
|
|
Container of worn engine oil recovery standard M 1200 cd. This container is équipéd' a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, Its low part out of steel or stainless with an oil storage capacity of 1200 liters and its high part out of polyethylene has a receptacle for the storage of the empty cans of 750 liters. These other characteristics: measure level, counter of discharge of great capacity, connection of pumping DNN 50 standardized for the draining of the collector, ring of levage.FABRICATION FRENCH
This worn oil collector offers an excellent report/ratio QUALITE/PRIX. Its gauge of level will enable you to see when the collector is full and, that will avoid any inopportune overflow thus. Its under anti-corrosion layer and its completion in partly low painting polyurethane protects it from the bad weather and UV; Its high part out of polyethylene is appropriate perfectly for a use in saline medium. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
Container of worn engine oil recovery standard R1000 or R 1500. These containers entirely metal are equipped with a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, they have a respective oil storage capacity of 1250 or 1700 liters and 800 and 1250 liters for the storage of the empty cans. Another characteristics: measure level, counter of discharge of great capacity with shutter of protection and automatic system of locking per float when the collector is full, connection of pumping DNN 50 standardized for the draining of the collector. FRENCH MANUFACTURE
This worn oil collector, entirely metal, is robust and, an increased protection against the fire and vandalism offers. Its broad counter of discharge is equipped with a rain-proof shutter and an automatic system of locking when the collector is full: that avoids any inopportune overflow thus. Its under anti-corrosion layer and its completion in painting polyurethane protects it from the bad weather and of UV and, thus guarantees to him an optimal lifespan. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
These containers of recovery of waste oils of the SEMI type industrial Modhuile are equipped with a double tank of retention out of polyethylene, in conformity with standard XP-H-96618 and the decree of April 7th, 1997. Capacities: 600,1350 or 2500 liters. Broad funnel with boltable lid to pour waste oils. When the collector is full it is enough with the oil pick-up to remove the grid of filtration of the funnel and, to plunge its nozzle of aspiration to carry out draining. Finally it are equipped out of standard with a gauge with level and, of an electronic system of detection of escapes between the 2 tanks.
IN OPTION: Connection fireman DNN 50 if you do not want us that the oil pick-up uses the funnel of discharge to carry out draining collector as it is full.
This polyethylene collector answers perfectly a use in saline medium or corosifs. Simple of use, Their respective capacities of 600,1350, and 2500 liters meet the needs for each one. The gauge of level will enable you to know when the collector is full and will avoid any inopportune overflow. Its double tank of retention, in conformity with the regulations in force avoids any accidental pollution Enfin its system of detection ant-escape between the 2 walls will inform you in the event of escape of the receiving tank. Modhuile indistrielle of SEMI type fulfills the environmental requirements thus perfectly
|
|
This container of recovery of waste oils or the effluents (gray water or black water) with double tank of retention, out of polyethylene, is in conformity with standard XP-H-96118 and the decree of the 4/7/1997. With capacity 2500 and 5000 liters, it is equipped with an electric or manual pump and a nozzle of aspiration.
Other characteristics: trap door of access to the boltable pump, measures level, electronic system of detection of the escapes between the two walls, indicator digital of level with remote sensing, Raccord FIREMAN DNN 50.
It at summer especially conceived for the marinas.
it makes it possible to directly aspire waste oils or effluents to the source. Its great capacity makes it possible to space the draining of the collector. Its system of sensing remote when the collector is full allows to the person in charge of management waste not to systematically on the spot check the level of filling of the collector.
Its polyethilene structure protects it perfectly from the saline air and corrosion.
|
|
| ... products without technical information |
| |
Wheel description
Standard non-marking rubber tread; hardness 85 +/-3 Shore A. Centre made of two riveted galvanized pressed steel discs.
The version with roller bearings of these wheels is also available with an antistatic strip. To order the anti-static wheel, add the suffix "AS" to the wheel+castor assembling cod
Bush bearing bore or roller bearing bore
In the bush bearing bore, the hub contains a bush made of polyamide 6 with molybdenum disulphide to make it self-lubricating.
In the roller bearing bore, the bearing housing contains cylindrical roller bearings with polyamide 6 cage.
Axle
Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Swivel top plate bracket NL with central lock
Swivel top plate bracket type NL. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted. The hexagonal brake system locks at the same time the rotation of two wheels.
|
|
| ... products without technical information |
| |
|
|
