Counter
6 digit LCD | 7922/7932 TRUMETER

6 digit supertwist LCD programmable preset counter with prescaler, quadrature input and EEPROM data storage in an IP65 DIN case.
This versatile counter with prescaling can be configured for quadrature or uni-directional inputs, dual preset or single preset with batch preset. Reset can be automatic, manual or electronic with a sink (NPN) or source (PNP) input.

The display is a supertwist high visibility backlit LCD which can be viewed from any angle. The count is on the main display and the preset value (or batch preset) is on the lower display.

Simple programming via menu driven display
Quadrature input
High visibility supertwist LCD display can be viewed from any angle
Backlight programmable ON, OFF or AUTO
40 years data retention with no power
Programmable decimal point up to 3 places
Operates from 85-265VAC or 10-26VDC
12VDC output to drive a sensor (when AC powered)
Opto-isolated inputs
Wide range of prescaling
Output relay contacts rated at 5A
Output can be set to latch or pulse with programmable pulse duration
Environmental protection to IP65
Standard DIN housing
CE, UL and cUL approved

All programming, reset and presetting can be carried out from the front panel. When powered from an AC supply, there is a 12VDC output to drive a sensor. The key below each digit sets the P1 or P2 (or batch) preset value on the lower display. The red reset key resets the display count to zero or P1 (according to programming). In normal operation the colon illuminates whenever relay 1 is active. In P2 Set mode the colon illuminates whenever relay 2 is active.