CNC drilling system Voortman Automatisering
35 - 1 050 mm

V600 Drilling System
The V600 drilling system is suitable for structural steel fabricators with a limited floor space. The operator loads the drilling table with several profiles behind each other, after which the horizontal drilling unit provides one or more profiles with the programmed hole pattern. By drilling holes through both flanges/sides or by rotating a profile it is possible to drill the material on all sides. Besides drilling the machine can also carry out thread tapping. A vertical hydraulic clamp, which clamps the product to the table during drilling, is fixed at the front of the drilling cabin. For tool changing, the drilling unit is provided with an automatic tool changers. After replacing a drill the length of the new tool is automatically measured and before starting the drilling process the web and flange height will be measured automatically. The holes in the flanges can be positioned with regard to the centre of the measured flange height or the actual web height.

Operating range
Min./max. height: 35 - 1.050 mm

VDH 1000 Drilling unit
Number: 1
HSS drill diameter: 8 - 40 mm
Carbide drill diameter: 13 - 32 mm
Thread tapping: M8 - M24
Spindle RPM: stepless 100 – 2.500 rpm
Lubrication: internal cooling air/oil
Holder: SK40
Automatic tool changer: VTC 5/40, 1 x 5 positions

More specifications...