Other laboratory analyzers

... The rubber flexible membrane protects the dielectric oil from the power transformer. This range of hydraulic compensator was specially designed for peripherally bolted (two-part) conservators. The oil is on one side of the membrane, the other communicates ...

... The Meech 983v2 & 984v2 test kit gives operators & maintenance staff the ability to diagnose static related issues and monitor the performance of their ionising equipment. The model 983v2 Static Locator features a large LCD display for clear ...

Oxygen monitor PM40 is designed for the low end of measuring the contest of oxygen in the welding area. By measuring down to 40ppm is a perfect simple solution to ensure a perfect weld. Technical specifications: Range Down to 40ppm Battery: up to 20 hours ...

With its wide range of probes and cells, the new TX-900 is the ideal tool for your texture analysis with its 400mm travel distance. Thanks to its touch screen directly displaying the curves, its method programming capability, storage and analysis of measurements, ...

... 7 Segment LED display Digital span calibration Easy update of software in the field through US Universal flange kit is designed to eliminate wheel fixing errors and achieve better results. Rim clamping from inside - 13″ – 26″ Rim clamping ...

CANwatch is an analyzer supporting easy error detection during installation and operation of CAN networks. CANwatch judges the analog signal on the bus and detects errors like e.g. invalid levels, overshoots, slow slopes and short circuits within the ...

... Sfere720 multi-functional power quality analyzer is an intelligent power quality monitoring device for AC 3 phase industrial usage with high precise power monitoring. It has power measuring, power metering and power quality analysis functions. It’s widely ...

TROM-600 online DGA monitoring system calculates and analyzes the dissolved gas in insulation oil to discover and diagnose the inner faults of transformers on time using the most mature gas chromatographic technology and fault diagnosis methods recommended ...

... The 2000.35.021 is a monophase Energy / Power Meter that can measure current and voltage AC/DC TRMS. Isolation for the input voltage is 4kV. Available via the RS485 Modbus output are: Irms, Vrms, Watt, Var, Va, Vpk, Ipk, Frequency, Cosφ, Bidirectional ...

As new CMIS standards are developed and adopted, with a wide variety of SFF/CMIS specifications available, CMIS testing becomes increasingly complex and time consuming. The MultiLane Nexus Analyzer is a CMIS/SFF debug tool and direct response to this ...

... The ND40 Analyzer is designed for the measurement and analysis of three-phase, 3- or 4-wire power network parameters in balanced or unbalanced systems. Features • Measuring class A – for 3 second aggregation. 10 minute and 2 hour aggregation – class ...

... The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserted into the supply line of the DUT (Device ...

... FRC-1/FRC-3 Features ● It has one vessels and one poles arranged on one line. ● The head part of the instrument can be artificially turned over smoothly and flexibly. ● The basket units and paddle units are made of imported stainless steel (SUS316L). ● ...

... As for multiparametric analyzers, they are instruments used to measure different chemical parameters simultaneously. In the context described, multiparametric analyzers are used to measure free chlorine, free ozone, paracetic acid, nitrates, C.O.D. ...

... Compact, cost-effective and flexible. State-of-the-art sensor system level testing for development and laboratory environments. S-TEST/2 Tabletop device Compact design, extensive features. Despite its compact design, the S-TEST/2 tabletop unit ...

... Volatile Compound Analysis for DART®-MS • By measuring time-dependent changes in volatile compounds, users can measure flavor release phenomena. • Then Volatimeship supports the sensory evaluation. • Sample chambers are designed to accomodate processes ...

... • Compact foot print with a field of 10×10cm • Simple operation of experiments and quick acquisition of results • Epi-blue light diminishes UV exposure to lab personnel and DNA damage in the sample • Adjustable epi-blue light source emits light with ...

A753 addWAVE Series 4 is a total redevelopment of the previous A733 generation of RTUs. It offers "more" in every aspect: more resolution, more memory, more features, more flexibility and expandability - and much more. It nonetheless is still very easy ...

The Beam Waist Analyzer Monitor (BWA-MON) and software enables true “real-time” laser beam measurement, analysis and monitoring of low to very high power CW and pulsed lasers. The system design is based on the international standards ISO 11146 and ISO ...

Designed to retrieve a buoy in case of mooring line break, BABS warns owners of line breakage by transmitting a signal to ARGOS satellites while BASM alerts of underwater equipment that may surface by transmitting through the same ARGOS satellite system. ...

... • Industry's leading knife-edge system • Unique tomographic image reconstruction • Beam measurements down to 3 microns and up to 9 mm • Accurately measures profile, position and power • Multiple detectors versions are available, covering wavelengths ...

... ♦Measure concentration of HC, CO, CO2, O2 and NO contained in exhaust gases from gasoline engine of vehicles. Advanced NDIR (non-Dispersive Infrared) analysis technology is used to measure HC, CO, C02 and the newest generation of electrochemical technology ...

The DT9847 Series of USB dynamic signal analyzers provide highly accurate measurements for sound and vibration measurements. Up to two analog outputs are available. Features include an A/D per channel, simultaneous analog I/O, wide bandwidth, low harmonic ...