Other tools

Blade width: 12, 20, 25 mm
Blade thickness: 0.5, 0.6, 0.7 mm

KOMET-UNIVERSAL is a new product made by KOMET which makes the most perfect cutting of three different materials possible. The bandsaw blade consists of alloyed carbon steel and has a hardened and tempered blade body and inductively hardened ...

Blade width: 25 mm - 50 mm
Blade length: 300 mm - 700 mm
Blade thickness: 1.25 mm - 2.5 mm

All-round saw blade. Manufactured from high-speed steel, laser welded to a spring back, these bimetal blades are able to withstand heavy feed pressures, giving economical, high cutting rates. Because these blades are virtually unbreakable ...

Blade width: 25, 32, 38, 50 mm
Blade length: 300 mm - 700 mm
Blade thickness: 1.25 mm - 2.5 mm

HSS Bi-Metal, variable tooth spacing; 7° positive For stainless steels and other tough materials which produce long chips. Manufactured from high-speed steel, laser welded to a spring back, these bimetal blades are able to withstand ...

Power: 10, 15 W

New LED reversing work light, new and compact design, high performing projector lens – Colossal beam in a compact body. New LED reversing work light highest value at the competitive possible price – Your budget choice for a premium product. ...

Power: 10 W

The LED mining work light NW-M50 is special design for mining industry, looks more robust with a larger heatsink body, with standard deutsch connector, prefect illumination operating well underground mining at a temperature of 40 ° to ...

Power: 40 W

Heated and dimmable work light NW-S40 is well received by Nordic consumers，which can better adapt to extreme weather. With heated lens will speed up the melting of snow and ensure your safety in driving. ■ Nova® Heated And Dimmable ...

Torque: 100 Nm - 6,000 Nm

The TLSM Series Industrial Torque Multipliers are designed to be faster and more durable than competitive products on the market. This is an invaluable tool needed by professionals requiring power and versatility to be better at completing ...

Torque: 100 Nm - 7,000 Nm

The Single-Speed Series is the result of an extensive design project to produce an efficient air motor, purposely built for this application in an accurate torque tool. The new air motor is married to the respected gearbox range, sharing ...

Torque: 200 Nm - 2,000 Nm

The Wheel Nut series of tools were designed to meet the needs of the commercial vehicle wheel market. The integrated reaction foot is designed specifically to reach recessed wheel bolts and the 72mm diameter gearbox is selected to cope ...

The brick cutter, placed at the end of a molding machine, cuts the bricks to length and makes the necessary cut-outs and engraves needed on some models. The range of TECAUMA’s bricks cutters include construction bricks cutters and multi-facing ...

This equipment is a green cutter after moulding, equipped with a dryer feeder, which automatically feeds the bricks into the dryer. It has a capacity of up to 40 tons per hour, on 8-hole bricks or 12-hole bricks used in the Maghreb. TECHNICAL • ...

The tile cutter, placed at the end of the molding machine, allow you to cut spun tiles to length and to make the cuts, engraves or tenons, needed on some models. This range of tiles cutters includes flat tile cutter and roman tile cutter ...

The PLARAD Torque and Tension systems The PLARAD Torque and Tension systems XVR and XVK systems have the following features: Well known Plarad quality Ideal for all industrial needs Simple to handle Less sizes ...

All accessory products supplied by Plarad meet the strict requirements of the brand with regard to quality, reliability and safety.

All Plarad accessory products strictly comply with the brand's requirements when it comes to the major factors of quality, reliability, and safety.

Hydraulic head for: • ring terminals without insulation (ZA dies) of 10 ÷ 120 mm2 • ring terminals with insulation (ZE dies) of 10 ÷ 120 mm2 • cable end-sleeves with and without insulation (ZT dies) of 25 ÷ 185 mm2 • Cu tubular terminals ...

• Cu tubular terminals and connectors on cable conductors (USD dies) of 6÷300 mm2 • Al tubular terminals and connectors on cable conductors (USD dies) of 16÷300 mm2 • round forming Al sector conductors (UDF dies) of 16 ÷ 240 mm2 • ...

• Cu and Al tubular terminals and connectors on cable conductors (UX dies) of 300 ÷ 625 mm2 Designed for electrical works of high intensity. Works with H 800 hydraulic pump and AH 100, AH 500, AH 550, AH 500L hydraulic units. Maximum ...

Scaffold Fittingscouplers COUPLERS – SLEEVE COUPLER

Circular saw blade diameter: 350, 300, 250 mm
Blade thickness: 2.5, 2.2 mm
Number of teeth: 54 unit - 108 unit

PCD saw blade H4 PCD saw blade tips H4 mm to be used on sliding table saw saws and horizontal panel saws. Suitable for cutting bilaminated panels using scoring blade. ADDITIONAL INFORMATION TYPE OF CUTTING DIA ALTEZZA PCD 4 ...

Circular saw blade diameter: 350, 250, 300 mm
Blade thickness: 2.2, 2.5 mm
Number of teeth: 54 unit - 108 unit

PCD saw blade H6 PCD saw blade tips H6 mm to be used on sliding table saw saws and horizontal panel saws. Suitable for cutting bilaminated panels using scoring blade. ADDITIONAL INFORMATION TYPE OF CUTTING DIA ALTEZZA PCD 6 ...

Circular saw blade diameter: 300 mm - 520 mm
Blade thickness: 3.5, 3.2, 3 mm
Number of teeth: 48 unit - 96 unit

PCD saw blade panel sizing machine H4 PCD saw blade for panel sizing machine tips H4mm. Suitable to cut from single panel to panels stack using also scoring blade. ADDITIONAL INFORMATION TYPE OF CUTTING DIA ALTEZZA PCD 4 ...

SERMAS has developed a whole range of consumables dedicated to the aluminium industry to meet highest technical requirements of its customers. All our blades are designed to offer optimized consumption and high-quality surface finish ...

A large range of circular saw-blades dedicated to industrial cutting for all types of machines and for all materials & sections. From small standard up to 1900mm diameter, we define most adapted blade (tooth pitch, geometry, quality, ...

Mounting Wing for Standard or CR Housings - Blue, Oval Hole • Mounting wings can be used to secure dovetailed Powerpole® 75 series housings by passing fasteners through the wings in either a horizontal or vertical orientation. Useful ...

Optional Bench Mount for TP0001 Pneumatic Crimp Tool Also found in: /PowerMod®/SB SMART/SBE 160/SBX 175/SBE 320/SBX 350/SBO 60/SBE 80/SBS 75G/SPEC Pak HIGH POWER/SPEC Pak Mid Power/SPEC Pak MINI 3/SPEC Pak Mini 3 PL/SPEC Pak Mini 5 PL • ...

The pipe cutting devices are designed to be fitted onto an endless pipe. With the fast clamping device the pipe cutting device can be clamped at any position on the pipe. The movement around the pipe is achieved by the means of ...

The Biotage® Horizon 5000 is a three-position automated disk extraction system that conditions the disk, loads the sample (20 mL to 2 L) and elutes the analytes all without user intervention. A benchtop system with optional use in ...