- Building - Construction >
- Industrial Building Equipment >
- Other heating equipment
Other heating equipment
Heating power: 800 W
Information: 1. PTC heating element for durability and efficient heating transfer 2. High/Low thermostat setting allows energy and electricity savings(full/half) 3. Rapid heating 4.Over-heat safety protection 5.Tip over included ...
Zhongshan Airmaker Electrical Appliance Co., Limited
Power: 1,200 W
Appliance: It is used as the main or additional (zonal) heating system in premises with height of ceilings up to 4 meters. Recommended to be installed in the apartments, offices, country houses or greenhouses. Selection: Thermal calculation ...
BILUX
Air flow: 234 m³/h - 620 m³/h
Power: 2 kW - 4 kW
Wall fan coils with 2 pipes. The fan coil wall mounted units is a terminal to treat the air of an environment, in both the winter and the summer periods. TECHNICAL DATA • Maximum cooling capacities ranging from 2 to 4 kW • VRV option, ...
HIPLUS AIRE ACONDICIONADO S.L.
This unvented heater is ideal for use in many applications including areas of high air filtration, high ceilings and spot heating. The RV Series offers exclusive design features, a proven history and a variety of kW's and control options.
Power: 0 W - 3,600 W
Low noise, high performance: the ideal fan coil solution for the ceiling installation in all kinds of rooms from offices to hotel rooms. Benefits - Outstanding flexibility in room design and unit installation, low space demand - Maintenance-friendly ...
LTG Aktiengesellschaft
Air flow: 300 ft³/min - 3,500 ft³/min
The Vertical Fan Coil (VFC) is a vertical forward curved, dual wall constructed unit. Performance capabilities range from 300 to 3,500 cfm and up to 3.5 in. wg. This unit is available in seven sizes. Unique features are listed below. ...
Greenheck
Flameproof electric radiators industrial electric heaters Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 /22 (Dusts) - Safe Areas Classification: Group II - Category 2G 2D
ELECTRICAL INDOOR CABINET Fan coil units either vertical or horizontal model. Floor, wall or ceiling mounted models and galvanised prepainted casing with anti-condensation isolating material, air outlet grid and heat transfer coil made ...
Tecnoclima Spa
Malzeme Linear grille, convector casing and frame are manufactured from high corrosion resistant aluminium profile. USAGE BSK series floor convectors are alternative to underfloor heating system and, they are modern heating equipments. ...
Power: 91 kW
With over 40 years’ experience, QS Group are national and international leaders in integrated automation engineering. QS builds industrial components used by white goods manufacturers, together with systems and moulds for sheet metal, ...
Ceramicx Ireland Ltd.
Power: 25 W - 1,000 W
Ceramic infrared radiators are made of highly flameproof ceramics with ceramic enamel coatings and heating coils from resistance wire inside. Infrared radiators use the electromagnetic radiation phenomena to transfer heat to the objects ...
Power: 25 W - 1,000 W
Ceramic infrared radiators are made of highly flameproof ceramics with ceramic enamel coatings and heating coils from resistance wire inside. Infrared radiators use the electromagnetic radiation phenomena to transfer heat to the objects ...
Power: 60, 100, 150, 250 W
IOT screw-in elements are ceramic infrared elements with an E27 screw base. The emitters of the IOT series are so-called "dark emitters" that do not emit any visible light and, due to this property, the robustness, especially in the ...
System for the reaction of floorings to fire tests – determination of the burning behavior using a radiant heat source in accordance with EN ISO 9239-1 The TBB 913 from NETZSCH TAURUS Instruments GmbH is easy to operate, offering innovative ...
Wattco Infrared radiant heaters are economic, efficient, and clean. Infrared heaters are designed for comfort heating applications that require radiant heat in indoor, outdoor, and exposed areas through direct infrared heat transfer. ...
The flame proof block of the SADH series is designed for ventilation duct heating in potentially explosive industrial areas (gas and/or dust). The heat source is an electrical wire resistance. The heat-carrying fluid is air. This product ...
Duct heaters are devices which are an assembly of multiple heating elements mounted in a plate or casing and used to heat the air in a non-pressurized condition. The Heater bundle is usually inserted inside a duct line or an insulated ...
Power: 250 W - 1,000 W
CERAMIC INFRARED HEATER APPLICATIONS personal heating equipment, saunas, industrial applications that require lower temperatures. DESCRIPTION: Instant heating Save energy even in difficult outside spaces TECHNICAL SPECIFICATIONS: Resistance ...
Power: 125 W - 1,000 W
Size: 245 x 60 x 37MM Average weight: 192g Aluminum-chrome resistance wire Heating voltage: standard 230V Useful wavelength range: 2-10 microns Other variations: voltages, power, lead length and terminations available on request Average ...
Power: 125, 200, 225, 350, 325 W
Size: 60 x 60 Average weight: 65g Aluminum-chrome resistance wire Heating voltage: standard 230V Other variations: voltages, power, lead length and terminations available on request Useful wavelength range: 2-10 microns Average ...
Digital Oven, controlled by microprocessor • DOWNLOAD PDF • Electronic controller at the instrument lower part to avoid overheating • Natural convection oven to avoid inner sample drying • Steel Inner chamber • Removable shelves • ...
First of all, the contaminated air is drawn in through the process fan and heated with the aid of an electric heater or gas burner to the required reaction temperature. Subsequently, the pollutants are converted into carbon dioxide and ...
The type SADH solid to air duct heater is designed for duct system heating applications in industrial hazardous areas with potentially explosive gas and dust. The heating resource used is electric resistance wire. The heating medium in ...
Heating power: 40, 50, 90 W
Code C0752 Description High power in compact design. High temperature plastic construction UL94:V0 Separate connection for element and fans. Molex 43645-0400, Terminale (Femmina) 43030 M3 x 0,5 screw inserts for mounting Complies RoHS
COMESTERO SISTEMI
SMTmax AE-F600C reflow oven is a high-throughput thermal processing system and its excellent thermal performance has been widely recognized for both printed circuit board solder reflow and for semiconductor packaging. AE-F600C systems ...
Ineltec's Radiant Panel is designed to perform fire reaction tests of floor coverings. It determines the burning behavior by a radiant heat source. Radiant Panel Pilot burner Extraction system Heat flow pyrometer Radiation Meter Smoke ...
Industrial Fan Heater 2 kW 2 Heat Settings HE511A Electric fan heaters for industrial applications. Model No. HE-511A features one heat setting, Model No. HE-511A two heat settings. Both units have thermostat control and fan only options. ...
Power: 4 kW - 4 kW
The Infresco 4kW series is part of a family of controllers designed to provide energy saving efficiencies, when used with Quartz Infrared Halogen Lamps or other heating and lighting products. The ‘S’ model softstarts the load either ...
United Automation Limited
Power: 12 kW
IRT RAIL SYSTEMS BY HEDSON Reaching and maintaining the highest quality curing results has never been easier. With an IRT Rail System by Hedson, quickly manoeuvre the heater into the perfect curing position, reaching all parts of the vehicle.
Herkules Hebetechnik GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining