- Metrology - Laboratory >
- Laboratory Equipment >
- Other laboratory equipment
Other laboratory equipment
Smiths Interconnect's wide range of RF/Microwave isolators & circulators are offered in drop-in, coaxial, microstrip/ surface mount, and waveguide configurations from C-band to V-Band. These high performance components are highly compact, ...
High power Circulators and Isolators feature various connector configurations, with options for terminating one port with internally produced 50 Ohm Terminations forming an Isolator. Together in combination these features provide highly ...
The product controls and acquires the pH and redox value, the ammonia concentration, and temperatures. The modular structure adapts to the requirements of the application. Up to 4 outputs are available. Choice of display visualizations Easy-to-use ...
Thermoreactors for easy digestion of standard parameters Safe and easy operation with automatic heating and switch-off for standard digestions • 12 round cells (16 mm) • 8 pre-programmed settings including fast digestion for COD • Easy, ...
The Parker Sentinel features automatic operation, which minimizes energy consumption while extending the usable life of fluids. This compact vacuum dehydrator provides flexibility to the user allowing for operation in areas where space ...
P filters: The high-pressure cartridge filter systems from BAUER KOMPRESSOREN – in use all over the world for the treatment of breathing air, industrial air, nitrogen, helium, argon and methane Rapid cartridge change: Minimised downtimes Ideally ...
Features ● Optimized warming up and cooling system, ultrashort mounting time. ● One-key operation, automatically processing warming up, pressing, thermal insulation, pressure maintaining, cooling and unloading. ● Operation on 7inch ...
Sample size: 22 mm - 45 mm
TIME-ZXQ1 automatic metallographic sample mounting press is a multi-functional water-cooled mounting machine for inlaying various samples. It is suitable for some small samples that are not easy to handle, the samples with irregular shapes ...
Compressed air receivers store the compressed air generated by a compressor and release it when required. In this way they compensate for fluctuating compressed air requirements and also reduce the compressor's switch-on and switch-off ...
Acoem Air 1000 is a specialised plant instrument air clean up system. It is designed to remove contaminants such as SO2 , NOx, CO, oils and particulates from plant instrument air and lower its dew point to less than –15 °C. The resultant ...
InAqua is a water purification system that can filter and clean the dirty water used for scrubbing floors. InAqua is very easy to use, also called “water washing machine” because it operates in a very similar way to a domestic washing ...
MED-LFA-20N series Luer Fitting Adapter MED-LFA-20N series hold Syringe Needles for Vial Stopper Penetrability Test. The Adapters are for tests partly complying with ISO 8871-5:2016 and ISO 7864:2016. Three adapter options are available ...
The filling power of cut rag depends essentially on the width of cut and optimum strand length. Therefore, the goal is to achieve the lowest possible portion of shorts, dust and strands that are too long, in order to maintain the highest ...
Unit for sieve analysis according to the horizontal screening principle. The unit is equipped with up to 8 sieve frames of varying mesh sizes and wire diameters. For sieve analysis, approx. 50 - 80 g of cut rag are screened for 3 - ...
We have a wide range of ultrasound emitters in standard measurements, as required. We design the emitter according to the customers’ special application requirements. Available frequencies: • 28 KHz (Sweep System +/2%) • 40 KHz (Sweep ...
Alternative Insulating Gases – Our joint contribution to climate protection The service carts of the G057R01 ECONOMY series have been specially designed for gaseous and liquid storage of gas mixtures for the complete gas handling of ...
Design: The sender units are available in two versions. The longlife sender unit with Order No. 554179 has a battery life of up to 5 years and differs from the standard version in energy management (number and version of batteries) ...
Manufactured from 1 - 1.5mm electrogalvanized steel Automatic door closure when the temperature exceeds 50°C Acid-resistant epoxy resin finish Insulated with rock-wool fibre high-density and calcium sulphate panels Internal melamine ...
Fire tests in compliance with the most stringent international standards, such as EN 14470-1 Protects in-stored Lithium-ion batteries from overheating due to external fires for a period of at least 90 minutes 3 models, in 2 different ...
Max. sample weight: 10 g - 5,000 g
Sieve diameter: 300, 200, 400 mm
Measurement range: 20 µm - 10,000 µm
Digital Laboratory Sieve Shaker KTL Available for 200 + 300 + 400 mm diameter Laboratory screens For a stack of up to 8 or 16 standard 200 mm analysis screens Unit ready to operate Cover made of Acrylic glass included
The hot mounting press Qpress 50 is a modular machine used in metallography for the fast, simultaneous and independent mounting of different materialographic specimens. The modularity of the Qpress 50 allows adjusting the machine configuration ...
QATM
The OPAL 410 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. Mould assemblies can be exchanged quickly and without tools. The robust aluminium ...
QATM
The OPAL 480 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. The fully automatic sliding closure allows quick and easy opening/closing of the ...
QATM
Weiss Technik’s Reach-In Insect and Plant Growth Chambers, Fitotron SGC, provide reproducible and uniform growth conditions for plants and insects. The success of plant cultivation depends on many different factors: reproducible, constant ...
Weiss Technik
Weiss Technik have a number of plant growth chambers in the Fitotron® HGC range, based on a modular design, meaning individual modules can be added or swapped as desired, to create a test growth chamber solution to meet your needs. This ...
Weiss Technik
These chambers are well equipped with features such as light shelves and controlled addition of fresh air for plant and insect research. Very accurate climate control with a low air flow speed is achieved by means of horizontal blowing-in ...
Weiss Technik
• Single benches with or without castors • Bench frames with worktops made of various materials • TopResist® and Trespa Toplab®PLUS melamine (see worktops) • Work heights of 750 mm (sitting workstation) and 900 mm (standing workstation) • ...
ARK-BioPEEK Medical-grade Capillary Biomaterial PEEK capillaries are small, thin tubes made of polyether ether ketone (PEEK) material that are specifically designed for use in biomedical applications. They are biocompatible, meaning ...
Smaller cleaning parts can also be cleaned in cleaning glasses and cups. In this way cleaning agents can on the one hand be used sparingly and, on the other hand, different materials can be cleaned with different cleaning agents.
De Lama has developed an innovative process starting from many years of experience in the field of sterilization and decontamination: sterilization and decontamination with hydrogen peroxide under vacuum. The new vacuum hydrogen peroxide ...
Product introduction: The vacuum oil filling and unloading system for electric locomotives is a kind of equipment specially used for the maintenance of the transformer of electric locomotives, and its main function is to carry out ...
Capacity: 200 l
Tiantai hybrid stills are designed to create a greater amount of reflux than a simple pot still while still producing flavorful spirits. Hybrid stills serve as multifunctional distillation solutions for craft breweries and wineries ...
Shandong Tiantai Beer Equipment Co.,Ltd
Capacity: 300 l
Whether you’re looking for a pot still, column still, or hybrid still for sale, our distillation units can be customized to do it all. All distillers are crafted by skilled workers who manually hammer, weld, and polish them to meet the ...
Shandong Tiantai Beer Equipment Co.,Ltd
Capacity: 200 l - 15,000 l
Tiantai hybrid stills are designed to create a greater amount of reflux than a simple pot still while still producing flavorful spirits. Hybrid stills serve as multifunctional distillation solutions for craft breweries and wineries ...
Shandong Tiantai Beer Equipment Co.,Ltd
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining