Other attachment devices

To be used with IBG FlexFit® fitting system and rigid PVC-U piping systems Only NEW IBG FlexFit® fittings with production date as of 03/2015 to be used d50 and d63

Holds formed "rings" of track in position for pipe welding on nonferrous and ferrous materials. Heights can be adjusted from 2.8" (71.1mm) to 4.95" (125.7mm). Different heights can be achieved using different length 5/16"-18UNC bolts.

The goose foot is a configuration recommended by lightning protection standards UNE 21186 and NF C 17-102 in order to obtain low inductance in the earthing system. It consists of 30 x 2 mm tin-plated copper tape.

Adjustment Set for ALMEMO® Devices Input connector with 1.5 m cable and 4 banana plug (for connection to the calibrator of the customer)including ALMEMO® Adjustment instructions and software AMR-Control (CD)

Wall pump bracket ideal for PM2 and PM4 piston pump with short tube.

The DIN rail metal mounting bracket is suitable for use in distribution cabinets, meter cabinets and in industrial applications. The mounting of the DIN rail clips enclosures is supported by multiple drill holes. The mounting clips are ...

Clevis for 135mm wheel with the possibility to add a torque arm for rolling base, pallet truck, trolleys...

Clevis for135mm wheel with the possibility to add a torque arm for rolling base, pallet truck, trolleys...

Clevis for 125mm wheel with the possibility to add a torque arm for rolling base, pallet truck, trolleys...

Socket holder ILLU BRIDGE Professional 3000 Fast, easy and professional mounting of Illumination. Through the corresponding adapters the socket holder is versatile applicable. ILLU BRIDGE Professional 3000 is composed of: Socket ...

COD. A000151 – Inox plate for ITA20 – PLATE for fruit crates cardboard / plastic / wood

The snap rings we offer are essential components used in locating bearing assemblies, where the bearing seat is wider than the bearing itself. They are specially designed to prevent axial displacement of the bearing on its seating surface, ...

The torque is a force applied at the end of a lever arm of length that is expressed in Newton meters, it is the link between the transmission axis and the element allowing the transmission of power. Among this range, you will find the ...

The load tests have the primary objective to compare the experimental arrows obtained during the testing phase and the theoretical arrows of the project, in order to evaluate the deformation profile of the element tested. The test loads ...

ML-02 Si-Pyranometer Compatible The ML-POA compact mounting plate is designed for the ML-02 Si-Pyranometer and plane of array solar monitoring applications. Aluninium Construction Works with PT-100 Temperature Sensor The ML-POA ...

The Slider Plate mounting is an additional fastening element for plastic barriers, in particular Traffic Barrier R2 HD+, Traffic Barrier R3 HD+ and Pedestrian HD+. The base has been designed to allow for quick and safe pull out of barriers ...

Retaining Bush Good rolling properties due to ball bearing mounted main ball Fitting by means of interference fit in through hole Customer specific spring force and outer geometry

These stands are designed for holding dial gauges. They do of course have many other applications; for example as end stops or for holding templates.

Stands can be supplied without arm, only the magnetic base.

ARM.050.800 Wall-Socket Mounting Bracket is a fixed connection that can be easily connected to vertical and horizontal surfaces. It is produced for light loads configurations. Weight 180gr. Color RAL7035 Material Aluminum Movement Fixed Package ...

ARM.80.800 Wall-Socket Mounting Bracket is a fixed connection that can be easily connected to vertical and horizontal surfaces. It is produced for medium loads configurations. Weight 320gr. Color RAL7035 Material Aluminum Movement Fixed Package ...

HECHT's Scale Compensators are designed for safe decoupling of filling scales with a high resolution. Due to its special shape with seamless and smooth compensator walls, it prevents any residues inside the compensator. -No dead spots, ...

Designed for lateral/wall mounting. Also available in: BLACK part no. 32368 WHITE part no. 32369 Attention: WM wiring module and MB mounting base are essential in the composition of the tower

Bracket for the waste chute. The waste chute is designed to dispose of fabric scraps after they are cut off by the overlock knife.

The extension plate fits most overlock models available on the market. It is used when the overlock is mounted in a lowered position (the overlock work table is at the level of the machine top). Made of 3 mm thick steel sheet. Powder coated.

The extension plate fits most overlock models available on the market. It is used when the overlock is mounted in a lowered position (the overlock work table is at the level of the machine top). Made of 3 mm thick steel sheet. Powder coated.

Galvanized and brass eyelets. Head diameter 7/9 mm and type 051 Brass-plated eyelets with flat head, suitable for use with manual or automatic machines. The flat head will not cut into the material, an important consideration for working ...

Simple 90 degree bevelled square rulers may be offered in any size, and are manufactured by the following specifications: • Rectification and whetstone honing on stainless steel measuring surfaces; • Honing of control edge. • Simple ...