2-jaw turning chucks
Rotational speed: 0 rpm - 8,000 rpm
Gripping force: 0 N - 19,000 N
... 110 mm two jaw power chuck manufactured by Kitagawa Europe. Created with a superior quality alloy steel, it has the ability to produce a speed, gripping force, and bore size with a 20% higher rate. Consisting ...
Rotational speed: 0 rpm - 7,000 rpm
Gripping force: 0 kN - 24 kN
... 135 mm two jaw power chuck manufactured by Kitagawa Europe. Created with a superior quality alloy steel, it has the ability to produce a speed, gripping force, and bore size with a 20% higher rate. Consisting ...
Rotational speed: 0 rpm - 6,000 rpm
Gripping force: 0 kN - 38 kN
... 169 mm two jaw power chuck manufactured by Kitagawa Europe. Created with a superior quality alloy steel, it has the ability to produce a speed, gripping force, and bore size with a 20% higher rate. Consisting ...
Outer diameter: 160 mm - 300 mm
... maximum power • indexing takes, with position control, approx. 2-4 seconds per 90°, depending on the size of the chuck • very simple hydraulic system based on 2 indexing mechanism ports, ...
Outer diameter: 160 mm - 550 mm
INDEXING CHUCK WITH AUTOMATIC CLAMPING AND INDEXING – (4×90°) MD MD is an automatic indexing chuck with hydraulic clamping and indexing. It is not self-centering. ADVANTAGES • made in special ...
Gripping force: 45 kN - 120 kN
Type 549 3 jaw power chuck is based on approved KFD-HS. The steel designed chucks offers a distinguished feature of all moving parts permanently lubricated in an oil ...
Rotational speed: 1,200 rpm - 4,500 rpm
Gripping force: 12 kN - 360 kN
... standards. All the movable components of the unit are hardened and ground. It also features direct lubrication of base jaws. The jaws have size of 200 with roller to limit unnecessary movement.
Rotational speed: 2,200 rpm - 3,500 rpm
Gripping force: 25, 29, 10, 12 kN
... through-hole. The series consists of a cylinder center mount with a steel design. The body and base jaws comes with a weight reduction. The base jaws and wedge are lubricated directly.
Rotational speed: 2,400 rpm - 6,000 rpm
Gripping force: 9 kN - 95 kN
Outer diameter: 80 mm - 315 mm
High Precision Power Chucks - LONG STROKE Size Range: 80mm - 315mm Number of Jaws: 2 Jaws Tongue & Groove Closed Center The CL-C Closed Center Power Chucks ...
Automatic indexing chuck with tilting ring on 2 positions at 180°, with 2+2 self-centering jaws and distributor with 6 hydraulic ports.
Rotational speed: 4,000 rpm - 8,000 rpm
Gripping force: 15 kN - 41 kN
BERG power operated chucks type KH 2 are designed for high capacity lathes. They stand out for their high clamping force and precision, a particularly large open centre for bar stock, as well as high ...
MMK Matsumoto's Automatic Jaw Change Chuck is specifically engineered to quickly and easily change the jaws. The tool is suitable for use in multiple job changes or automated robot load. ...
Rotational speed: 3,000 rpm
Another speciality from STIEFELMAYER. Eccentricities of up to 6 m can be infinitely set with the STIEFELMAYER eccentric chuck. Switching backwards and forwards between centric and eccentric machining can be done with ...
Your suggestions for improvement:
How to choose this product
Two-jaw chucks are used to clamp and rotate irregularly shaped parts on lathes. The jaws usually are designed to completely encompass the part being turned.
These chucks can be used to hold workpieces for all lathe operations. They hold complex parts such as pipe joints, wooden objects and rectangular parts, and can clamp both internally and externally.
The two-jaw chuck is either manual or power-actuated. It generally has "soft-jaws" which can be machined to conform to the object being turned.
How to choose
Choice will depend on the size of the part to be turned. Other factors to take into account are the clamping force, speed, weight and the form of the soft jaws.
Receive updates on this section every two weeks.