Actuators for the furniture industry

Stroke : 40 mm - 2,000 mm
Force: 900 N - 200,000 N
Speed: 7.5 mm/s - 80 mm/s

... high quality products, to be able to work in bad industrial environment. Acme Screw Linear Actuator LAP Series (duty cycle 30%) and ball screw Linear Actuator LBP series (100% duty cycle ...

Stroke : 40 mm - 5,000 mm
Force: 0.3 kN - 1,000 kN
Speed: 100 mm/s - 1,000 mm/s

Lim-Tec scissor lift electric actuator:Overall accuracy of 0.05 mm; Maximum rated load of 5 tons; Speed of 1 m/s, 100% can work continuously; Precision thrust control accuracy is 5%, the closed-loop control ...

Stroke : 50 mm - 1,200 mm
Force: 20 kgf - 40 kgf
Speed: 60 mm/s - 220 mm/s

... It is easy to match the required workpieces in various industries and it becomes a simple and practical mechanical arm. It is mainly used in dust free workshops or special fields such as electronics and ...

Stroke : 50 mm - 1,000 mm
Force: 452 N
Torque: 1.3 Nm - 2.5 Nm

... Precision, Speed and Load Capacity. They are widely used for Medical Equipment, Automation Products Line, Electronic Industry and etc. As an Industrial Factory, we also accept OEM. ...

Stroke : 50 mm - 1,200 mm
Force: 20 kgf - 40 kgf
Speed: 60 mm/s - 220 mm/s

... It is easy to match the required workpieces in various industries and it becomes a simple and practical mechanical arm. It is mainly used in dust free workshops or special fields such as electronics and ...

Stroke : 100 mm - 3,500 mm
Force: 8 kN
Speed: 1,000 mm/s

... Precision, Speed and Load Capacity. They are widely used for Medical Equipment, Automation Products Line, Electronic Industry and etc. As an Industrial Factory, we also accept OEM. Once ...

Stroke : 50 mm - 1,200 mm
Force: 20 kgf - 40 kgf
Speed: 60 mm/s - 220 mm/s

... It is easy to match the required workpieces in various industries and it becomes a simple and practical mechanical arm. It is mainly used in dust free workshops or special fields such as electronics and ...

Stroke : 100 mm - 2,000 mm
Force: 1,572 N
Torque: 390 Nm - 550 Nm

... Precision, Speed and Load Capacity. They are widely used for Medical Equipment, Automation Products Line, Electronic Industry and etc. As an Industrial Factory, we also accept OEM. Once ...

Stroke : 50 mm - 600 mm
Force: 800 N - 6,000 N
Speed: 4 mm/s - 25 mm/s

Miniature DC permanent magnet motor, small size, easy to install. According to the needs of use, the optional speed is from 4mm/s to 25mm/s Ultimate load capacity 6000N. Optional 5°C~40°C operating environment configuration, full load ...

Stroke : 330 mm
Force: 800, 1,500 N
Speed: 16 mm/s - 32 mm/s

... continuously for up to 2 minutes. Limit switch built-in design. Protection class IP20 for indoor use. Product certification: CE Mainly applicable to all kinds of industrial automation equipment, biomedical, ...

Stroke : 50 mm - 600 mm
Force: 800 N - 4,000 N
Speed: 5 mm/s - 32 mm/s

... temperature and it can run continuously for up to 2 minutes. Limit switch built-in design. Protection class IP43, recommended for indoor use. Product certification: CE Mainly used in various industrial ...

Stroke : 50 mm - 600 mm
Force: 500, 1,000, 2,000 N
Speed: 6 mm/s - 15 mm/s

... continuously for up to 2 minutes. Noise: ranging 30cm≤50dB, ranging 1m≤40dB Limit switch built-in design. The highest protection grade IP54 Mainly used in all kinds of light industrial automation, biomedical, ...

Force: 450 N - 2,500 N
Speed: 5 mm/s - 110 mm/s
Ambient temperature: -10 °C - 60 °C

Three phase or single phase Motor CE Worm gearbox Acme lead screw or ballscrew (VRS) Chrome plated steel push rod Permanent grease lubrication IP 65, tested according to rule CEI EN 60529 - NB: only for brake motors standard IP54, IP65 ...