Air screwdrivers with torque control

Rotational speed: 4,400 rpm - 7,200 rpm
Torque: 10 Nm - 400 Nm

The FIAM's pneumatic screwdrivers feature torque from 10 to 210 Nm, are very precise, easy to use, and are used for tightening of various types of screws, bolts and nuts. They feature ...

Rotational speed: 1,000 rpm - 1,650 rpm
Torque: 0.15 Nm - 3.4 Nm

... has been tested to 1 million cycles without failure. Performance This screwdriver delivers the power you need to get the job done. Compact Easy to store and carry, this screwdriver packs plenty of ...

Rotational speed: 500 rpm - 2,800 rpm
Torque: 0.15 Nm - 5.1 Nm

... Adjustable Cushion Clutch Screwdrivers from INGERSOLL RAND, are low-cost screwdrivers that deliver apical performance with a low acquisition cost. It may be used in a variety of applications, and can ...

Rotational speed: 1,000 rpm - 1,650 rpm
Torque: 0.15 Nm - 3.4 Nm

... adjustable shut-off clutch screwdrivers that have been developed to provide efficient, and reliable quality performance, and they are specifically used in light assembly applications. This tool has a compact, and pistol ...

Torque: 3.5 Nm - 12.5 Nm

The pneumatic LUM screwdrivers by Atlas Copco come with an accurate and fast shut-off clutch, which ensures high-quality tightening and smooth performance. These are also suitable for joints that demand ...

Rotational speed: 470 rpm - 2,150 rpm
Torque: 0.5 Nm - 6.5 Nm

Rotational speed: 550 rpm - 1,700 rpm
Torque: 0.3 Nm - 10 Nm

... The screwdriver can be connected by 4 mm O.D. tube to a YTC-3 controller for batch counting. These new Red Rooster screw drivers may be used with "oil free" air. In case of "oil free" air, ...

Rotational speed: 550 rpm - 1,700 rpm
Torque: 0.3 Nm - 10 Nm

... designed Red Rooster Shut-Off screwdrivers feature superior torque and accuracy as well as low vibration and noise level. The clutch is specially designed with a blend of low reaction forces and high ...

Rotational speed: 950, 650, 1,400 rpm
Torque: 0.4 Nm - 5 Nm

The DOGAs DESL screwdriver are integrated with a shut-off clutch feature which provides a minimal torque reaction and a high torque precision and accuracy. Product benefits: Ergonomic ...

Rotational speed: 2,000, 1,350, 1,000, 850, 400 rpm
Torque: 0.4 Nm - 12 Nm

The DOGA’s DSE screwdrivers are integrated with a shut-off clutch feature which provides a minimal torque reaction and a high torque precision and accuracy. Product benefits : Ergonomic ...

Rotational speed: 1,400, 950, 650 rpm
Torque: 0.4 Nm - 5 Nm

The DOGA’s DSE screwdrivers are integrated with a shut-off clutch feature which provides a minimal torque reaction and a high torque precision and accuracy. Product benefits : Ergonomic ...

Rotational speed: 230 rpm - 2,200 rpm
Torque: 1.8 Nm - 35 Nm

These screwdrivers are intended for screws from size M4 to M10 and are equipped with torque control clutch. Their construction offers excellent performance, accuracy, reliability and ...

Rotational speed: 150 rpm - 1,200 rpm
Torque: 0.2 Nm - 25 Nm

... ELS164 electronic control unit is able to operate according to 7 screwing methods:1. SIMPLE TORQUE SCREWING:the screwdriver stops as soon as the pre-set torque has been ...

Rotational speed: 500 rpm - 1,200 rpm
Torque: 0.4 Nm - 3.7 Nm

This clutch type stops the power supply to the motor and stops tool rotation when a preset torque is reached. The clutch enables high- precision tightening torques (+/- 15% in flexible fastenings and ...

Rotational speed: 2,200, 750, 420, 310 rpm
Torque: 1.8 Nm - 14.6 Nm

This clutch type stops the power supply to the motor and stops tool rotation when a preset torque is reached. The clutch enables high- precision tightening torques (+/- 15% in flexible fastenings and ...

... very easily with various motor types such as: pneumatic motors with automatic release and air supply shut off, electric motors, servomotors with torque and angle control, ...

Rotational speed: 1,800 rpm
Torque: 2.2 Nm - 10 Nm

The Axial screwdriver, engineered by Wurth, is a pneumatic powered device that has a 2.2 - 10 Nm torque range with a 1800 U/min (rpm) total rotational speed. This product also features ...

Rotational speed: 800 rpm
Torque: 0.06 Nm - 1 Nm

Screw suction integrated.For screws from M1.4 to M5.Previous model: 0 607 459 201

... precise torque is reached. The STICKSCREW® system benefits include: Self-contained system. No expensive tooling, jigs or fixtures, are required Designed to reduce repetitive motion stress injury. Minimum operator training ...

Rotational speed: 1,000 rad.min-1
Torque: 3.5 Nm - 8 Nm

... Push start Free speed 1000 min-1 For screws up to M 6 Exhaust air to rear Direction of rotation reversible Driv. int. hexagon F 1/4" Torque range 3,5 - 8,0 Nm Noise level 75 dB(A) Air ...

Rotational speed: 250 rpm - 2,200 rpm
Torque: 0.3 Nm - 28 Nm

... professional tri-direction air inlet – upside, under-side , behind-side (optional). A-series tool makes the space flexible and agile, the user can change the air-inlet direction as per their need. * ...

Rotational speed: 1,000 rpm
Torque: 0.2 Nm - 0.6 Nm

... the preset torque. The clutch mechanism shuts off the air supply when the desired torque level is met, preventing over-torque. This also instantly signals the end of ...

... include pneumatic, AC or DC electric torque control. Nosepiece can be jaw, finder, mini or nut-jaw. Feeder escapement can be standard, nut, cam, or finger. As part of the Visumatic advant-edge, torque ...

Rotational speed: 1,500 rpm

Air motor tightens really fast* Compact, lightweight and silent gear speed-reduction mechanism.

... quality, ergonomics and productivity. ACCURACY: The MSC clutch ensures minimal pair dispersion VERSATILE: Wide range of torque in each model RESISTANT: mechanical structure which increases the life cycle of the ...

Rotational speed: 8,000 rpm
Torque: 58 Nm - 60 Nm

... duty pneumatic screwdrivers feature a 4 step torque regulator, pneumatic motor with high outputs and minimal air consumption of 130 l/min, two hammer ...

Rotational speed: 1,700 rpm
Torque: 1 Nm - 6 Nm

Min. torque Nm: 1 Max. torque Nm: 6 Callet chuck mm: 1/4" Luchtaansluiting BSP: 1/4" Min. hose size mm: 8 Airconsumption l/m: 550 Power KW: 0,4 Length mm: 165 Width mm: 43 Height mm: 154 Intrastat: 84671110 Weight ...

Rotational speed: 300 rpm - 2,200 rpm
Torque: 0.3 Nm - 156.2 Nm

... design delivers reliable accuracy with a repeatable torque control. When the preset torque setting is achieved, the clutch mechanism shuts off the air supply to prevent ...