Centrifugal fans

Air flow: 1,160 m³/h - 10,800 m³/h

... Application Commonly, these fans have been designed for local ventilation. They are installed on wall brackets inside the buildings (indoor application). As they can overcome significant air flow resistances, they are particularly ...

... : 1 TD-160/100 N SILENT fan + 4 m of flexible aluminium ducting GSA-100 + 1 interior circular air valve BOR-100 + 1 exterior mounted grille GR-100 + 1 adhesive duct tape BA KIT TD-250/100 includes: 1 TD-250/100 fan + ...

Air flow: 22 m³/min - 2,810 m³/min

... slightly dusty air. These fans provide high efficiency and low noise; they are largely used in ventilation, conditioning, drying and cooling systems, as well as mechanical draft and removal of poisonous gases. *) +150 °C with cooling ...

... High performance, powerful suction High performance, powerful suction fans work behind the filter and provide with up to 84% efficiency for optimal suction performance whilst drawing on minimum energy consumption. ...

Air flow: 50 m³/h - 2,500 m³/h

Air flow: 0 m³/h - 13,000 m³/h

... CENTRIFUGAL FAN Type : V SOD BASE and V SOD HT BASE Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan, cubic with added base for fixation on inlet ...

Air flow: 200,000 m³/h

... All our centrifugal fans are built to cover very widely different industrial applications in the field of ventilation, exhaust, pneumatic conveying, supplying mechanical draught for fumes and air conditioning. Apart from ...

Air flow: 1,140 ft³/min

... include the ventilation of containers or pipes. The exhaust fan has been designed for tough industrial conditions. The housing and impeller wheel are made out of aluminum casting. The rigid fan housing and trolley are ...

Air flow: 1,300 m³/h - 2,300 m³/h

... Single inlet centrifugal blowers and fan DYF-250-QD Class：Single inlet centrifugal blowers and fan ...

Air flow: 380 m³/h - 1,900 m³/h
Diameter: 233 mm - 397 mm
Rotational speed: 1,400 rpm - 2,700 rpm

... motor protection rating • Min./Max. Ambient temperature -25/60°C • Galvanised sheet casing • Backward curved radial blades • Easy installation and set-up ...

Air flow: 200,000 m³/h

... All our centrifugal fans are built to cover very widely different industrial applications in the field of ventilation, exhaust, pneumatic conveying, supplying mechanical draught for fumes and air conditioning. Apart ...

Air flow: 13,000 m³/h

... APPLICATIONS: The fans of these series are suitable for sucking clean air and they are mainly used in ventilation and drying plants, for materials cooling, for the removal of welding smoke, in the plastic working machines, in the aspiration ...

... The industrial fan Recube plug fan for extraction is a fan able to put the user in depression, so as to realize vacuum or depression in test chambers or extract air at high pressures for lifting and extracting ...

Air flow: 2,400 m³/h - 180,000 m³/h

... SR N8 High pressures centrifugal fans, capacity from 2.400 to 180.000 m3/h, driven through semi-elastic joint, reverse blades Centrifugal fans suitable for clean or high dust content ...

Air flow: 350,000 ft³/min

... making this fan one of the most efficient centrifugal fans. This means: Less horsepower is required to produce the same performance as other fan models. Operational sound levels are ...

Air flow: 1,200 m³/h - 2,600 m³/h

... repairing water damage, as well as drying hollow spaces and buildings under construction The combination of a powerful radial fan and thoroughly conceived accessories for the connection of air distributor hoses (RTV ...

Air flow: 245 m³/h - 2,050 m³/h
Diameter: 100 mm - 315 mm

... IN LINE FAN IN LINE XPRO Efficient and energy-saving duct fan. Its removable motor block facilitates assembly and maintenance. IN LINE XPro is a duct fan that allows one or more large rooms to be ...

... UNIVERSAL PLENUM BOX, AVAILABLE IN MANY VARIANTS Plenum boxes for supply air and extract air For circular and square diffuser faces Plenum box made of galvanised sheet steel For supply and extract air For all types of ceiling systems Horizontal ...

Air flow: 50 ft³/min - 6,300 ft³/min

... The model G is a direct drive, spun aluminum fan, designed for roof mounting on a curb for general, clean air exhaust applications. Units feature a spun aluminum housing and have certifications including seismic, high wind and hurricane. 50 ...

Air flow: 4,100, 5,500, 8,400, 12,000, 15,500 m³/h

... K-BOX - duct ventilators K-Box, due to their construction, may be mainly applied in: kitchen restaurants bars and diners Separation of the motor space from the rotor space makes it possible to use K-Box ventilator in environment of 95% humidity ...

Air flow: 17 m³/min
Rotational speed: 3,400 rpm
Noise level: 60 dB

... anticorrosive strong The fan uses the thickened steel plate base to be stable, the seismic effect is good, the fan starts smoothly. Fan outlet sealing is good, fan motor made ...

Air flow: 0 m³/s - 1,490 m³/s
Diameter: 190 mm - 280 mm
Rotational speed: 0 rpm - 2,765 rpm

... simulation technology, reasonably designed flow runner combined with ultra-efficient motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and makes the blade angle ...

Air flow: 4,000 m³/h - 26,000 m³/h

Air flow: 0 m³/h - 18,000 m³/h
Diameter: 18 in

... Scroll casing with forward curved blades – double inlet High performance centrifugal fan Direct driven centrifugal fans of DD range with forward curved impeller directly mounted on ...

Air flow: 400 m³/h - 1,800,000 m³/h

... These fans 8,000 kW motor power and up to 1200 ° C gas temperature up to Cement, Iron and Steel, Power Plants and Mining facilities for industrial facilities such as corrosion and wear protection, are manufactured by our company. ...