- Detection - Measurement >
- Position, Speed and Acceleration Measurements >
- Cylindrical proximity sensor
Cylindrical proximity sensors
One-piece non-contact solid-state position sensors that operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a sinking current output Features • Solid ...
• Easy to install actuator magnet with threaded aluminium housing • South-pole facing Alnico magnet • Adjustable threaded mounting stud • Operating and storage temperature 40 – 150°C • North-pole version also available – Part No. AS101002
Measuring range: 3.81 mm - 12.7 mm
Reed position sensors with normally open or closed contacts that change states when a magnetic field is applied. These sensors act as non-latching electrical switches. Features • Contacts hermetically ...
Length: 60 mm
Measuring range: 12 mm
Process temperature: -60 °C - 204 °C
The FS-A Series Proximity Switch (M18 Thread) is highly versatile and can be used in a multitude of applications where a reliable signal is required. Utilising proven magnetic technology enables them ...
Euroswitch
Length: 48 mm
Measuring range: 12 mm
Process temperature: -60 °C - 204 °C
The FS-B Series Proximity Switch (5/8" UNF Thread) is highly versatile and can be used in a multitude of applications where a reliable signal is required. Utilising proven magnetic technology enables ...
Euroswitch
Length: 48 mm
Measuring range: 12 mm
Process temperature: -60 °C - 204 °C
The FS-C Series Proximity Switch (M18 Thread) is highly versatile and can be used in a multitude of applications where a reliable signal is required. Utilising proven magnetic technology enables them ...
Euroswitch
Measuring range: 5, 1.5, 2.5 mm
FEATURES Shorter, space saving sensor bodies with high detection sensitivity and long detection distances. Compact sensor head Visible output indicator built into sensor ...
Keyence
Measuring range: 30 mm
... The Ex magnetic sensors are actuated by an M range permanent magnet, entering their proximity without any physical contact. These devices are available with NO, NC, changeover, bistable or bistable changeover ...
Measuring range: 4 mm - 7 mm
... concealed installation •Application-dependent combination of sensor and actuator(e.g. sensor concealed behind stainless steel, actuator in stainless-steel housing in process zone) The M18 safety sensor ...
ELOBAU
Measuring range: 0.08 in - 0.71 in
... on all models 600 Series Proximity Sensors are active digital sensing devices that generate one pulse per pass of an actuating target within their sensing field. No direct contact with target material ...
Description One-piece non-contact solid-state position sensors that operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a sinking current output Features ...
CHERRY
Measuring range: 10 mm - 30 mm
... position magnetic proximity sensors. The general use of these sensors is for the industry and household use such as windows sensors, doors opening detection, household ...
celduc relais
DNX8031, 4-20mA Loop-Powered, Vibration Transmitter, up to 0-250um pk-pk. Direct DCS/PLC integration for shaft vibration monitoring for fluid film bearings on motors, pumps, compressors and steam turbines. DNX8033, 4-20mA Loop-Powered, ...
The proximity inductive sensors are electronic commutation elements that work without fisical contact.They are employed for electronic circuits control. The inductive sensors are widely ...
Measuring range: 55 mm - 110 mm
... encapsulated watertight design DC Sensors in 3-wire NPN or PNP connection AC Sensors in 2-wire connection Dual LED indication Fully Adjustable Sensitivity Short Circuit Protected. These MD2200 Series ...
MODULOC CONTROL SYSTEMS LIMITED
... The working principle of the magnetic proximity switch is to change the position and polarity of the trigger to make the sensor. A magnetic field is generated around the sensor ...
Soway Tech Limited
... electromagnetic brakes or Electromagnetic actuated brakes 24V and 205V DC - 230V AC. • Encoders from 100 to 1200 points/tr. • Sensors 24V DC NPN or PNP. • Etc...
Measuring range: 5 mm - 30 mm
Process temperature: 0 °C - 50 °C
... 30VDC powered ultrasonic proximity sensor. A sealed transducer provides protection in environments where dirt and moisture are a problem. The sensor is constructed of Acetal plastic ...
Migatron
Measuring range: 1 mm - 30 mm
Process temperature: -30 °C - 130 °C
Magnetic proximity switch is mainly composed of sensors and triggers. Sensor part is connected by the reed pipe through a lead and sealed; Trigger part may be the magnet ...
Foshan Chuandong Magnetic Electronic Co., Ltd.
Length: 30 mm
Measuring range: 2, 4 mm
Process temperature: -25 °C - 80 °C
Inductive round sensor – M8 – Length 30mm Non Flush – Sensing distance 4mm PNP NO output – M8 male connector connection
Comepi srl
Measuring range: 1.5 mm
Series P/N :CJM1.5-6.5M- Sensor Dimension :Ø6.5 Installation :Flush Detection Distance :1.5mm Output Type :NPN/PNP, NO/NC Standard Detected Object :Iron 8X8X1mm Supply Voltage :DC6-36V
Cheemi Technology Co., Ltd
Measuring range: 0 cm - 500 cm
... low‑cost vehicle detection sensor that uses ultrasonic technology for non-contact sensing. The MB8450 is designed to be an easy to use sensor for applications where vehicle detection is desired. This ...
Measuring range: 20 cm - 400 cm
Special development for the agricultural sector Ultrasonic proximity sensor DGV-200 is a measurement device determining a precise distance to the object. It is applied for control of a device position, ...
Measuring range: 0.6 m - 15 m
Long Range The IRU-3430 series ultrasonic sensors use a larger, more powerful transducer for a 15m sensing range Impressively Programmable Featuring our AutoSense software, you can program the IRU-3430 to perform ...
Measuring range: 0.2 m - 6 m
Product properties - Non-contact distance metering - Analogue or switch output - Narrow 5° beam angle - Fully temperature compensated - Metal or PP body - Magnet or cable programming - Short circuit and reverse ...
Intrinsically Safe 11 mm Bently™ Compatible Proximity Probes Temperature Range: -49 to 212°F (-45 to 100°C) Material: FEP (Flouroethylene Propylene) Jacket Cable Jacket with 316L Stainless Steel Probe Body
Length: 5 mm
Width: 8 mm
Measuring range: 4 mm
... M8, Standard Class AI053 inductive sensor has a housing made of nickel-plated brass, an enhanced , the high protection rating of IP67 and an M8 connector. The AI053 can be used in all standard applications. The sensor ...
autosen GmbH
... Group inductive sensors lines: • AC DC Inductive Proximity Sensors • DC High Voltage Inductive Proximity Sensors • DC Inductive Proximity ...
V5 Group
Measuring range: 0 mm - 8 mm
Magnetic proximity switches detect selective switching marks of ferromagnetic steel. Non-magnetic materials have no influence on the function of the proximity switches. The encoders ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining