Double-acting cylinders

Stroke : 16 mm - 60 mm

Short-stroke cylinders • Coupling for short-stroke cylinders • Hinged pin wrench • Machine tap sets

Stroke : 3.25 mm - 175 mm
Torque: 2.2 Nm - 28 Nm
Speed: 0.5 m/s

... Compact Cylinders feature a compact design for applications where cylinder length is critical. The self-lubricating nitrile piston seal increases cylinder performance and provides the ...

Magnetic cylinders are an excellent choice for applications with environmental concerns. The MG magnetic linear cylinder has no mechanical connection of the carrier to the piston resulting in easy rotation ...

... designs as well as replacement actuators for existing applications that had previously used traditional pneumatic or hydraulic cylinders. These replacement markets are created by the advantages of a flexible walled ...

Stroke : 26, 27, 29 mm

Clamp cylinder operating in rod retraction, with a combined clockwise or counterclockwise stroke and a linear stroke for tightening. Possible rotation angles 45°, 60° and 90°. Mounting by square base or threaded body.

Stroke : 2 in - 10 in

HIGH-TONNAGE, LOW CYCLE, HYDRAULIC RETURN. Cylinders come standard with swivel caps to reduce the effects of off-center loading. Cylinders may be “dead-ended” without damage. Hard chrome ...

Stroke : 5,700 mm
Force: 110 N - 640 N

... Air pressure Piston area, piston axle (inner part), piston axle (outer part), load friction ,load. The cushioning of the cylinder slot is garanteed by a most precisely grinded inner steel band. The inner band is kept ...

Force: 1.4 kN

... LINEAR CYLINDER With dual guide, Flat housing of high-strength aluminium material and mounting areas on three sides, Driven by oval-shaped oblong cylinder Ø 63 mm for thrust and tensile forces of 1400 ...

... customized hydraulic cylinders. In order for us to submit an off er to meet your needs, please provide any special dimensions and requirements for the hydraulic cylinder along with your inquiry. When ...

Compact Hydraulic Cylinder Maximum operating pressure 500 bar Primarily used for mold construction Piston diameters from Ø16 mm to Ø200 mm Several piston diameters with standard strokes in stock Multiple ...

Pressure: 200 bar - 250 bar
Speed: 0.5 m/s
Ambient temperature: -25 °C - 80 °C

... hydraulic crutch cylinders, designed under a double-acting cylinder, as an actuator, are specially directed for supporting applications of agricultural trailers, lifting ...

Stroke : 30 mm - 260 mm

... prevent the entrance of dirt and to improve the working life of the cylinder. OPERATIONAL AREAS These cylinders are used in industrial applications where a large number of cycles are required. ...

Stroke : 50 mm - 1,000 mm
Bore: 40 mm - 140 mm
Pressure: 180 bar

Double acting cylinder with bush and bottom drilled

Stroke : 5 mm - 100 mm
Bore: 8 mm - 100 mm
Pressure: 2 bar - 12 bar

The FARBO short stroke cylinders have been developed for the worst working conditions. They are available with bore up to 100 mm, gaskets in Polyurethane and self-lubricating guide which ensures a life time of 5 millions ...

Stroke : 38 mm - 258 mm
Pressure: 700 bar
Force: 30 tf - 145 tf

With Single and Double acting ranges Tritorc cylinders show versatility in operational requirements and fulfill the needs of the user. All single acting cylinders ...

Stroke : 20 mm - 50 mm
Bore: 20 mm - 50 mm
Pressure: 160 bar

... Caracteristics The CC short-stroke hydraulic cylinders can meet the need for small-sized presses. The main feature of these cylinders is their reduced overall dimensions, compared with ISO cylinders, ...

Stroke : 49 mm - 67.5 mm
Pressure: 100 bar
Rod diameter: 16, 20 mm

The cylinders are the basic elements of all our hydraulic linear units and table legs. They consist of a brass tube and have a piston rod made of stainless steel. Thanks to perfected technology and precision work, our ...

Stroke : 3,000 mm
Pressure: 160 bar
Rod diameter: 14 mm - 90 mm

Round cylinder •Robust screwed construction • Compact design • Good price-performance ratio • Broad range of applications • 7 types of attachment • 3 seal variants Optional equipping ...

Stroke : 0 mm - 1,800 mm
Bore: 25 mm - 160 mm
Pressure: 0 bar - 280 bar

... the end of the piston stroke; - rephasing cylinders (master and slave cylinders); - cylinders can be provided with pilot check valves and other valves as agreed with the customer. For ...

Stroke : 10 mm

... and are double acting. Bore of this thin cylinders have features to adjust stroke and also for choosing the type of rod end. The barrels of these cylinders are manufactured ...

Stroke : 50 mm

... adopted technical solutions do guarantee strength and reliability over time. The cushioned version is recommended when the cylinder has to bear demanding working cycles, since it reduces wear of materials. The wide range ...

CXSM Dual Rod Pneumatic Air Cylinder This kind of cylinder is double cylinder structure with high precision and dual output force,no rotation,better performance against ...

Force: 100 daN - 400 daN

Orbinox standard double acting cylinders are speciffically designed to suit Orbinox knife gate valves. Main features: -End caps are made of aluminium. -Barrels up to bore 250mm are made ...

Stroke : 57 mm - 1,219 mm

Double-acting Cylinders. Collor threads,plunger threads and base mounting holes for easy fixture (on most models). Baked enamel finish for increased corrosion resistance. ...

Stroke : 8 m

... hydraulic systems with Eaton’s comprehensive line of NFPA-compliant industrial tie rod cylinders. With hydraulic, pneumatic and electrohydraulic types, these cylinders come in bore sizes from 1 in (25.4 ...