Explosion-proof fans

Air flow: 2,070 m³/h
Diameter: 250 mm
Rotational speed: 2,800 rpm

... controllable. Explosion proof execution according to ATEX. Number of poles: - 2 Voltage: - 400 V , 3 ph , 50 Hz Rated current (FLC) uncontrolled: - 0.75 A Nominal power: - 250 W Max. air flow temperature: - 40 ...

Air flow: 1,250 m³/h - 95,000 m³/h

... Centrifugal wheel with backward-curved blades Wired proximity switch fitted (except on ATEX versions) Large cap made of UV-resistant ABS Fastening system for round ducts Atex version Several types of drive, numerous ...

Air flow: 60 m³/h - 250 m³/h
Rotational speed: 2,760, 2,850 rpm
Noise level: 45 dB

... Fans for a powerful and safe ventilation of safety storage cabinets. • Housing and impeller made of polypropylene • Sealed against gas emission • Connecting fitting DN 75 • Protection class IP 55 • Air flow ...

Air flow: 2,800 m³/h - 80,000 m³/h

Air flow: 160 m³/h - 1,200 m³/h
Rotational speed: 2,850, 2,900, 2,950 rpm
Noise level: 62 dB - 88 dB

Air flow: 30,000 m³/h

... PRODUCT CHARACTERISTICS Designed specifically for use in explosive atmospheres, ESX230 electric fan meets ATEX standards. This fan is perfect for Positive Pressure Ventilation (PPV) in explosive atmospheres ...

Air flow: 1,900 m³/h - 7,400 m³/h

... general, WPA-D-N/Ex fans have been designed for application in the areas of explosion risk, where explosive atmosphere (i.e. mixture of flammable compounds in the form of gas and vapour with the air) is likely to occur. ...

Air flow: 50 m³/h - 2,500 m³/h

Air flow: 0 m³/h - 250,000 m³/h

... AXIAL FAN Type HC Explosive atmospheres - Industrial ventilation - Tertiary ventilation Short HCC or long casing HCL with connecting flanges, direct driven. Version HC-EX for ATEX. Diameter of wheel / impeller : 300 to 2000mm Flow ...

Air flow: 13,000 m³/h

... size 90 can be supplied. SPECIAL EXECUTIONS: For all the fans of these ranges special executions may be possible, like the construction in stainless steel or for high temperatures and the ATEX execution for the zones ...

Air flow: 1,800 m³/h - 10,000 m³/h

... WDeX - roof fans WDEx ventilator is intended for use in ventilation of rooms where presence of explosive atmosphere caused by gases, vapour or fog classified as zone 1 is possible. Unit of group II, category 2, gas explosive atmosphere ...

Air flow: 2.57 m³/s
Diameter: 350 mm - 650 mm
Rotational speed: 1,428 rpm

... ATEX Plate Mounted Axial Flow Fan ATEX Construction Code: Ex II 2G c Ex e IIB T4 • 4 standard sizes from 350mm to 650mm • Air volume flow rates up to 2.57 m3/s • Static pressure up to 125 Pa • Suitable ...

... Type AFDB axial fan has long or short stainless steel or carbon steel material case fitted with stainless steel, aluminum or sheet molding compound (SMC) which is also called glass‐fiber reinforced polyester (GRP) material impeller. ...

Diameter: 200 mm - 4,800 mm

... COMETFans in our ATEX Technical File and stored with an ATEX Notified Body. COMETFANS products are certified for the following: The general characteristics and the performances of the products do not vary when they ...

Air flow: 50,000 m³/h

... • Impeller diameters from 280 to 1,250 mm • Temperatures from -10 to +125 °C • Volume flow up to 50.000 m³/h • Pressure increase up to 10.000 Pa • Overhung design • Flow one-sided suction • Drive power up to 110 kW • Bearing: Without • Installation ...

Diameter: 1,530 mm

... The NEW A fans are manufactures assembling variable pitch, wide-chord airfoil profile blades with a light aluminum alloy hub. The fans are the best choice for applications which demand high air-flows at medium/low rpm. ...

Air flow: 1,400 m³/h - 35,000 m³/h

... Based on the Axial series, these units have explosion- proof single phase and three phase motors. Maximum physical protection by means of a dense grid integrated in the support arms. Certifi cated fans, nº ...

... stainless steel Explosion proof of dissimilar materials Explosion- proof heat-resistant of dissimilar materials Explosion- proof corrosion-resistant stainless ...

Air flow: 800 m³/h - 67,000 m³/h

... type axial fan can be made of anti-corrosion material to transport corrosive gases. ※ Explosion- proof axial fan impeller is made of aluminum alloy material,special explosion- proof ...

Air flow: 175 m³/h - 5,400 m³/h

... Backward curved impellers in accordance to DIN 1940, class G 2,5 Metallic casing Model 315 EX, explosionproof according to ATEX Zone II 3G c IIB T3 X ...

Air flow: 1,200 m³/h - 29,000 m³/h

... ERIES HIGH TEMPERATURE EXPLOSION- PROOF AXIAL FLOW FAN CBF series high temperature explosion- proof axial flow fan is made of explosion- proof ...

Air flow: 800 m³/h - 22,000 m³/h

... charge (version IIC due to the presence of hydrogene). Wall or in duct assembly. Groupe II (surface industry) : Atex zone 1 (category 2G) and Atex zone 2 (category 3G). Marking CE Ex II2G (IIB T4). ...

Air flow: 4,320, 2,940, 2,040 m³/min

... • Centrifugal fans made of anti-acidic material • Case made of: PP – PVC • Impeller made of: PP – PVC – FE – AISI316 • Flow rates and prevalence: on request • Atex class fans available on request ...