Female fittings

Diameter: 20 mm - 90 mm

... li>Category: PP compression fittings

• Model: EL352
• Short description: ELBOW WITH THREADED FEMALE OFFTAKE 90°
• Type: PP compression fittings
• Brand:

Diameter: 20 mm - 90 mm

... WITH THREADED FEMALE OFFTAKE 90° for irrigation and fluid distribution systems. Compression connection on run branches with female threaded offtake for threaded accessories.

Details

• Type: PP

Diameter: 1.6, 3.2, 4.5 mm
Operating pressure: 0 psi - 100 psi

... the tubing. Features Beswick’s proprietary single edged “line contact” barb allows tubing to be pushed onto the fitting easily by hand, while still providing exceptional holding power. It also insures a leak tight connection ...

Diameter: 4.5 mm
Operating pressure: 0 psi - 100 psi

... Adjustable position 6-port fitting, with 10-32 external thread, combination stud with barb, and four 10-32 internal threads. Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, ...

Diameter: 2, 2.4, 1.6 mm
Operating pressure: 0 psi - 100 psi

... Miniature, fixed position elbow fitting, with 1/16″ NPT external thread and built-in barb. Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally ...

Diameter: 4 mm - 16 mm

... Compression fitting made of SUS316, which is highly resistant to corrosion. Best suitable for not only chemical industries but industries such as medical care, semiconductor manufacturing, solar battery and secondary battery, food, ...

Diameter: 3, 6, 4 mm
Operating pressure: -0.1 MPa - 1 MPa

... small barb fitting is best suitable for requiring corrosive resistance or use in chemical atmosphere where space-saving piping is required. Compared to Minimal Fitting, the size is max. 15% smaller to the height. Subject ...

Diameter: 4 mm - 16 mm

... By using special brass in the main metal body, this product line has achieved the high resistant performance against water. Best suitable for Auto Industry and Thermal Control for mold tooling. It does not require connecting sleeve, therefore, no ...

Diameter: 0.125 in - 0.38 in
Operating pressure: 0 bar - 15 bar

ZRP triangular flanged swivel joints have a robust metallic structure, are easy to fit and adjust and are widely used in manufacturing plants requiring product diversification.

Diameter: 0.375 in - 2 in
Operating pressure: 16 bar

... Union with BSP threaded female ends, O-Ring in EPDM or FKM. Series of fittings for pipes conveying fluids under pressure with threaded joints. ...

Diameter: 16 mm - 63 mm
Operating pressure: 16 bar

... 90° elbow with reinforced solvent weld socket d and BSP threaded female end R with STAINLESS steel reinforcing ring. Series of fittings designed for conveying fluids under pressure with threaded and ...

Diameter: 0.75 in - 4 in
Operating pressure: 16 bar

... Reducer: BSP threaded female end (R1), BSP threaded male end (R reduced). Series of fittings for pipes conveying fluids under pressure with threaded joints ...

Diameter: 6 mm - 69.3 mm

... Metal fitting Material - Nickel-plated brass Temperature range - -20°C to +80°C Metal fitting S Material - Nickel-plated brass Temperature range - -20°C to +80°C Metal fitting pro Material ...

Operating pressure: 10 bar

... Compression fitting for plastic and metal composite tubes Material - Nickel-plated brass Material moulded seal - EPDM Material clamping ring - PA Material support sleeve - Brass blank Tightening torque - 40 Nm Max. operating pressure ...

Operating pressure: 10 bar

Fitting, Metric, Straight Single Barb, M5 (Male), 2,4 mm [3/32 (I.D.), ENP (Brass), Seal : O-Ring NBR (Nitrile), Bulk

... Flexible Spiral Conduit Fittings Liquid Tight Female Type Fixed & Swivel Cap nut: Brass with nickel plated Ring: PA6 Ferrule: Aluminium / brass Gland body: Brass with nickel plated O-ring: NBR Connection thread: ...

... Flexible Spiral Conduit Fittings Liquid Tight Female Type NPT Fixed & Swivel Cap nut: Brass with nickel plated Ring: PA6 Ferrule: Aluminium / brass Gland body: Brass with nickel plated O-ring: NBR Connection ...

Diameter: 0.375 in - 4 in

... Material - : - Steel cast iron / zink Temperature Range - : - -40° + 150° Protection Class - : - IP67 Internal structure - : - Metal ferrule, polyethylene gasket Properties - : - It is used for connection of spiral pipes to external instruments ...

... Straight socket female thread Material : Brass Nickel Plated Temperature Range : -20°C +100°C ( -4°F +212°F ) ...

... 45° Plug female thread Material: Brass Nickel Plated Temperature Range: -20°C +100°C ( -4°F +212°F ) ...

... 90° plug female thread Material: Brass Nickel Plated Temperature Range: -20°C +100°C ( -4°F +212°F ) ...

Diameter: 0.4 mm - 19 mm

... COVAL proposes different models of male and female fittings adapted to the different suction cup ranges. ...

Diameter: 10 mm - 20 mm

... Barbed fittings used to connect the vacuum source to the vacuum tube to guarantee a rigid connection. Material: brass Models : . RVM: Straight Fitting (Male) . RVF: Straight Fitting ( Female) . ...

Diameter: 0.13 in - 2 in
Operating pressure: 15 bar - 75 bar

The SP Cupla Type A is recommended for processes involving air, water, hydraulic oil, and chemicals. It yields a maximum working pressure of 15 to 75 bar. The housing materials of this coupling consist of steel, stainless steel, and brass. The seal material ...

Diameter: 17.5 mm
Operating pressure: 10 bar

... The Compact Cupla is designed with a solid 17.5 mm external diameter. Its plug and socket have an inherent valve that automatically shuts off. The body is made of brass or stainless steel to provide resistance against damage. The end ...

Diameter: 4, 6, 0.13 mm
Operating pressure: 10 bar

... a body made of plastic. It is ergonomic as the plug only needs to be pushed in to the socket for connecting, and a button is pushed for disconnecting. Both socket and plug have built-in valve types and valveless types. ...

Diameter: 4 mm - 14 mm
Operating pressure: 16 bar

... — for rough surfaces – Modular, flexible structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum ...

Diameter: 6, 8, 10, 4 mm
Operating pressure: 16 bar

... for rough surfaces – Modular, flexible structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR ...

Diameter: 4, 6, 8, 10 mm
Operating pressure: 16 bar

... for rough surfaces – Modular, flexible structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR ...

Diameter: 0.25 in - 2 in
Operating pressure: 10 bar

... Media : Air, Water, Oil, Gas RPM: 1000 RPM Features High-Perfomance Bearings & Seals Dual Connection Available ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar

... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar

... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 ...

Diameter: 3 mm - 14 mm
Operating pressure: 20 bar

... The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...

Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar

... The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings of the MT ...

Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi

... Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: Resin (PEI) 4 ...

Diameter: 8 mm - 50 mm

... UNIONS HOSE SHANK CONICAL SEAT - FEMALE HOSE SHANK - STAINLESS STEEL 316L ...

Diameter: 6 mm - 100 mm
Operating pressure: 16 bar - 20 bar

... FEMALE / FEMALE 90° ELBOW (CASTING) - STAINLESS STEEL 316 (Model : 5244) ...

Diameter: 6 mm - 100 mm
Operating pressure: 20, 16 bar

... THREADED TEE (CASTING) - STAINLESS STEEL 316 Model : 5248) ...

Diameter: 6.35 mm - 25.4 mm
Operating pressure: 689.48 bar - 4,136.85 bar

... : Directional fittings and hex nipples in SS 316. MP female 20,000 psi and HP female 60,000 psi. Hex nipples available in MP and HP male combinations across 10,000–60,000 psi.

Diameter: 3 mm - 50 mm

... PANAM Tube Fittings are available in Single & Double Ferrule design Tube fittings are available in SS 316, Duplex, Monel, Hastelloy & Brass materials Variety of end connections: Male & Female NPT, ...

Diameter: 1.588 mm - 50.8 mm
Operating pressure: 0 bar - 689 bar

... PANAM Flare Fittings are available in SS 316, Duplex, Monel & Hastelloy materials Variety of end connections: Male & Female NPT, BSPP, BSPT, 37° Flare, Swivel & JIC Swivel Leak-tight connections capable of withstanding ...

Diameter: 4 mm - 14 mm

... Stainless steel pneumatic fittings are durable and corrosion-resistant, ensuring the highest possible seal under high pressure. Their streamlined internal structure effectively reduces pressure drop and improves equipment efficiency. ...

Diameter: 4 mm - 16 mm

Diameter: 4 mm - 16 mm

Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar

... Instant Pneumatic Fittings - Ø 4 to 12 mm - M5 to 1/2" Conical (Teflon-coated) or cylindrical (O-ring) fitting Features: - Competitive pricing, robust, highly reliable, with over 30 years of proven experience - ...

Diameter: 4 mm - 10 mm

Diameter: 3, 2 in
Operating pressure: 0 bar - 8 bar

It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application (petrochemical, ...

Diameter: 0.75 in - 1.25 in

Operating pressure: 1,035 bar - 4,200 bar

... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...

Operating pressure: 0 MPa - 700 MPa

... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...

Diameter: 3 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar

... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...

Operating pressure: 25 bar

Operating pressure: 25 bar

... Exd Nipples allow connections between female mouthpieces. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - Stainless steel ...

Diameter: 15 mm - 600 mm
Operating pressure: 0 bar - 100 bar

... ROTOFLUID 1000 Series Swivel Joints are widely used in applications requiring low and meidum load capacity with different material, seal and connections style alternatives. ROTOFLUID 1000 Series Swivel joints are used for; -Water -Steam -Hot Oil -Pneumatic -Hydraulics -Chemicals -Petroleum -Gases -All ...