Pressure: 31.5 MPa
Temperature: -20 °C - 70 °C
Flow rate: 14 l/min - 600 l/min
... 1-way restrictive valve consists of needle valve and 1-way valve in parallel. It is used to adjust the flow in one way, and reverse back freely. ...
Ningbo Hoyea Machinery Manufacture
DN: 40 mm - 900 mm
... HYDRAULIC CHECK VALVE - Same construction as Model C000/CF000. Closes to prevent flow reversal. Adjustable opening & closing speed controls. CONSULT FACTORY for control valve price list ...
DN: 0.375 in - 4 in
Pressure: 16, 10, 8 bar
Temperature: 0 °C - 80 °C
Codital
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
... valve is a PVC-u ball check valve ideal for use in applications that require precise closure and for conveying dirty fluids, even with suspended solids and filaments. CB check valve ...
DN: 0.125 in - 1 in
Pressure: 400, 320 bar
Temperature: -20 °C - 100 °C
... In line check valves available from 1/8" to 1" bsp, Max.working pressure 400/320 Bar, oil flow rate up to 160 Lt./min. (depending on the size) ...
F.lli TOGNELLA
Pressure: 3,000 psi
... GROUND HEAT TREATED SPOOL that assures long life. FREE FLOW IN ONE DIRECTION and checked flow in the other (Not a zero leak check). BUILT IN DAMPENING CHAMBER provides smooth action when pilot pressure is applied. HOLES DRILLED ...
DN: 40 mm - 150 mm
Pressure: 0.5 bar - 17 bar
Temperature: 60 °C
... beyond most other valves. This guide will asist you in the selection of the optimal DOROT Series 500 valve. Remote Control & Check Valves EL - Solenoid Controlled Valve CV ...
Pressure: 0 Pa - 3,200,000 Pa
... The UZZD10 is a check valve designed for applications in hydraulic systems. It can serve as a low-pressure overflow valve to maintain pressure drop at a consistent degree. This is equipped ...
PONAR S.A.
Pressure: 3,000 psi
... the corresponding cylinder port. The pressure on this valve port will shift the pilot spool opening the opposite check valve. This will allow oil to return through the opposite check ...
DN: 50 mm - 1,500 mm
Pressure: 270 psi - 4,730 psi
Temperature: 196 °C - 593 °C
... Swing check valve Product Switch valve Product description Swing check valve Model H44H/X Size 2”～60”(50mm～1500mm) Operating temperature ...
Pressure: 3 psi - 16 psi
... In-line Check Valves - General Information MICO® Residual Check Valves allow free flow of hydraulic system fluid in one direction while maintaining ...
DN: 80, 200, 100, 150 mm
Pressure: 16 bar
... BETTA swing check valve-Resilient Seated to AS4794 with lever&weight for drinking water and neutral liquid applications to max. 40℃ Test/Approvals: Hydraulic test according to BS5153/AS4794 Seat: ...
Pressure: 300 Pa
Temperature: -20 °C - 80 °C
... Description Check valves are destined generally as a security system to avoid that the pressure in the hydraulic circuit can invert the fluid direction, generally oil. For more information ...
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
... pilot-operated hydraulic check valve, which can be applied for unidirectional blocking or load holding circuits. PC08 allows flow from ② to ③, while blocking flow from the opposite direction. When ...
Hydrabase
DN: 0.5 in
Pressure: 210 bar
Temperature: -20 °C - 90 °C
... Hyva Check Valve with a max. working pressure of 210 bar, Nominal flow of 35 L/min. This Check Valve is made from aluminium and the temperature range is -20 / + 90. ...
DN: 3 mm - 6 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
... pilot-operated check valves are leak-proof check valves with which the flow direction from B to A is open and the flow direction from A to B is normally blocked. If a hydraulic ...
DN: 40 mm - 1,200 mm
Pressure: 40, 64, 10, 16, 25 bar
... STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN 1074-3 CHECK VALVES EN 558 S48 (ISO 5752) (DIN 3202 F6) FACE TO FACE EN 1092-1 DRILLING FLANGES STEEL EN 1092-2 DRILLING FLANGES IRON MATERIALS BODY FIG.500-500A-500AGS-505-505A ...
DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min
The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.
Dicsa
DN: 0.5 in
Pressure: 16 bar
Temperature: 4 °C - 100 °C
... Brass ball valves with incorporated stainless steel filter, check valves, a blend of manometer and darin. Ball valves are multipurpose for the hydraulic system. Valve ...
DN: 0.125 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -29 °C - 400 °C
... Check valves, also known as one-way valves, non-return valves, or single-flow valves allow fluid to flow in the direction of the arrow but do not allow ...
DN: 80 mm - 200 mm
Pressure: 10, 16 bar
Temperature: 60 °C
... Association for Gas and Water Applications), it is your reliable check valve. Perfect for all projects in which water should only flow in one direction: to the consumer. The Dueker check valve ...
Pressure: 45 bar
... Check valves and stop valves are designed for installation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants: R22, R134a, R404A, ...
DN: 0.375 in - 1.25 in
Pressure: 210 bar
... The CNT and DT Series, manufactured by HOF hydraulic, are check valves that feature an optional cracking pressure. These valves allocate a liquid or gas to run through it in only one ...
Pressure: 50 psi
... RegO® Double- Check Filler Valves incorporate a resilient upper check valve, normally designated as a filler valve, and a lower check valve, commonly ...
Pressure: 300 bar
... Check Valves For a wide selection of direct- and pilot-operated check valves, engineers look to Eaton for a variety of cartridge and in-line hydraulic products. Eaton ...
Pressure: 207 bar
Temperature: -184 °C - 232 °C
... Kepsel® cartridge valves are designed for simple installation (no expensive machining for cavity) and offer the same outstanding performance as their counterpart Kep-O-seal® inline valves. These spring-operated poppet ...
DN: 6.35 mm - 19.05 mm
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 80 °C
... UNIDIRECTIONAL VALVE VUI, BALL TYPE CHECK VALVE INSERT TYPE BALL SEALED The unidirectional insert valves VUI allow the free flow through in a direction while the flow is blocked in ...
Oleoweb Srl
Pressure: 240 bar
Temperature: -40 °C - 120 °C
Flow rate: 76 l/min
... Specifications · Operating Pressure：240BAR · Flow：76L/min · Internal Leakage：5drop/min.max.at operating pressure · Temperature：-40°C to +120°(-40°F to+250°F) · Cavity：10-2 · Fluids：Mineral-based fluids with viscosities of ...
Wenzhou Meric Hydraulic Technology Co.,Ltd
Pressure: 350 bar
... permits the coupling of bevel gears, worm gears, hydraulic brakes and a variety of input shafts to the planetary units, as well as providing for a wide choice of coupling flanges for hydraulic or electric ...
Pressure: 207 bar
... This valve allows free flow from 1 to 2 and blocks flow from 2 to 1. ...
Comatrol
Pressure: 25 psi
... The fluid supply vessel is connected to the valve supply port (chimney) using a luer connection or tubing. The fluid is withdrawn from the supply vessel by a syringe or other device connected to the aspiration ...
DN: 4 mm
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 55 °C
... Two check valves are integrated in Type 0498. If this double pilot controlled check valve is combined with two 3/2-way valves, a 5/3-way function with ...
DN: 0.25 in - 1.25 in
Pressure: 2,500 psi - 5,000 psi
Temperature: -40 °F - 250 °F
... configurations. These are in-line one way valves with standard spring crack pressures of 1, 5, and 65 psi. The DT Series hydraulic check valves are available in a wide ...
Parker Quick Coupling Division
Pressure: 450 bar - 4,200 bar
Temperature: -20 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure range up to 4200 ...
DN: 0.25 in - 1 in
Pressure: 0 bar - 1,500 bar
Temperature: -20 °C - 200 °C
... Duff-Norton Europe ball check valves for high or low pressure hydraulic circuits prevent flow reversal in a circuit or protect against overpressure that can occur in certain parts of a circuit. Unguided ...
DN: 80 mm - 2,000 mm
... effective protection against flooding and backflow. CRC - CRR Flap Valves for Hydraulic System Protection CRC and CRR flap valves are designed to prevent backflow in hydraulic and ...
Pressure: 0 bar - 350 bar
Flow rate: 2.4 l/min
... hose leakage. Two single acting hydraulic circuits can be connected by the EDCV-1. Key Points Keep pressure in the cylinders even if there is leakage in the main hydraulic line between pump and double check ...
DN: 6 mm - 38 mm
Pressure: 250, 160, 100, 400 bar
... RHV-M-ED Check Valves RHV06ZLMEDA3C RHV08ZLMEDA3C RHV10ZLMEDA3C RHV12ZLMEDA3C RHV15ZLMEDA3C RHV18ZLMEDA3C RHV22ZLMEDA3C RHV28ZLMEDA3C RHV35ZLMEDA3C RHV42ZLMEDA3C RHV08ZLMEDA3C RHV10ZLMEDA3C RHV12ZLMEDA3C RHV14ZLMEDA3C RHV16ZLMEDA3C RHV20ZLMEDA3C RHV25ZLMEDA3C ...
WUXI SAMWAY CO.,LTD
the best suppliers