DN: 50 mm - 1,200 mm
Pressure: 2 bar - 10 bar
... KG10A Knife Gate Valves Unidirectional wafer design valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
DN: 2 in - 54 in
Pressure: 150, 100 psi
... DeZURIK KGN Knife Gate valves are available as a bi-directional resilient seated valve or a unidirectional metal seated valve.KGN-RSB Bi-Directional Resilient Seated ...
DeZURIK
DN: 40 mm - 600 mm
... forth precisely designed MNC Knife Edge Gate Valve at genuine rate. Our company holds specialization in manufacturing, exporting and supplying of Gate Valve in India. ...
DN: 400 mm - 2,000 mm
... the upper part of the penstock to the right or to the left, the shield of the penstock rises or lowers, changing in this way the clear opening. PRINCIPAL ADVANTAGES Strong construction, penstocks completely ...
... The VGP slide valves are valves designed for heavy and particularly stressful applications. They are normally installed under hoppers, silos and tanks. Driven by pneumatic actuators, the run of the lens is guided ...
DN: 2 in - 12 in
Pressure: 10 bar
Temperature: 0 °C - 90 °C
... Knife gate valves are a specific type of gate valve that are typically used in industries for handling tough solids and slurries. Named for their shape, knife ...
SIMPLE VALVE, S.L.
DN: 50 mm - 250 mm
Pressure: 0.4 bar - 3.1 bar
Temperature: 0 °C - 60 °C
... Ideally suited for flow control using minimal piping space. Easy to open and close. Light weight. Specially indicated for swimming-pools and spas. TPV Gaskets. ...
DN: 50 mm - 1,200 mm
Pressure: 6, 16, 25 bar
... The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries ...
ORBINOX
... Dredge Gate Valve FEATURES: The dredge valve is designed in such a way that there are no fasteners inside the body Dredge valve is made of fabricated high tensile steel and cast steel The ...
DN: 150 mm - 800 mm
Pressure: 0.5 bar
Temperature: 300 °C
... section Reliable shut-off of the medium due to robust seat sealing system Very short positioning times compared to simple knife gate vakves OPERATION DETAILS When in its closed position, the flap plate is pressed ...
Kühme Armaturen GmbH
... flat gate is attached to silo and vessel discharges and assures the optimal sealing of stored dusty and granular bulk goods up to 8 mm in size. The pneumatically activated flat gate is normally used as a proportional ...
Stanelle Silos + Automation GmbH
... Flanged Knife Gate Valve AFC Double Flanged knife gate valve is designed for general industrial service applications. The design of the body and seat ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 50 mm - 400 mm
Pressure: 150 psi
... KNIFE GATE VALVE non rising stem Technical characteristics: stem: non rising, SS420 body: cast iron EN-GJL-250 wedge: SS304 coating: blue epoxy powder, color RAL5015 EPDM seat, bronze nut Nominal ...
BLUCAST
DN: 50 mm - 400 mm
Pressure: 10, 7, 8, 5, 6 bar
... Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, ...
Watergates GmbH & Co. KG
DN: 50 mm - 600 mm
... SUPPORTED KNIFE GATE VALVE Epoxy coated cast iron body - AISI 304 knife - Metal seat - PN10 - Handwheel ...
DN: 50 mm - 600 mm
... Use : Handling used/ Gate used for the handling of solids (ganular, pulverulents…), and main application in exit of silo. Body shape : Wafer Type : 1511 Tightness: Metal/metal Face to face : According to manufacturer standard Operation ...
INTERNATIONAL FLUIDES CONTROLES
Pressure: -8 mbar - -10 mbar
Temperature: 150 °C - 200 °C
Flow rate: min -9.0 l/s
... Specification: Use lockable cylinder, gate plate could precisely stop at alternative position. Alternative position is set by reed sensor. Good reproducibility of gate plate position, tolerance ±1%. Procedure control ...
... Heavy duty slide valve made of cast iron for powders or granular products. This equipment ensures high seal level as for the external environment and can be supplied in three sizes with manual wheel or with pneumatic drive. ...
DN: 50 mm - 300 mm
Pressure: 10 bar
... Replaceable top packing gland enables sealing replacement without disassembly of the valve The valve is self-cleaning when opening the valve, an additional scraper is available for extra protection of ...
DN: 2 in - 48 in
... Reliable operation Longer wear life Open Body Design ejects material from the bottom and prevents the gate from jamming 100% bubble tight seal Reduced operation costs Applications Mining and mineral processing Mineral Sands Cement Sand ...
DN: 50 mm - 1,200 mm
Pressure: 10 bar
... STANDARDS OF MANUFACTURE EN 1171 (ISO 1083) DUCTIL IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 1092-2 (ISO 7005-2) DRILLING FLANGES FEATURES FIG. 51-51M-51E-51EM MATERIALS BODY CAST IRON ...
DN: 2.5 in
Temperature: 0 °F - 170 °F
... Materials and Properties Loc-Line?: Vacuum Hose and Fittings Colors: Blue, Orange Material: Acetal Copolymer PVC Adapter: PVC Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt Solutions No: ...
DN: 50 mm - 400 mm
Pressure: 10 bar
... Through Conduit Knife Gate Valve Maker: Through Conduit Gate Valves with Pneumatic Actuator or Handwheel, PN10, DN50-DN400, Class 150 LB, 2-16 Inch. ...
DN: 2 in - 48 in
Pressure: 25 bar
Temperature: -29 °C - 650 °C
... normal when the temperature is -29-650°C. The knife-type gate valve has a shearing function, which can scrape off the adhesive on the sealing surface and automatically remove debris. The stainless steel ...
the best suppliers