Manual hydraulic directional control valves

Operating pressure: 0 bar - 20 bar
Flow rate: 0 l/min - 60 l/min
DN: 0.5, 0.375 in

... counterbalance valves, P.O. checks, flow restrictors and flow regulators. Ail sections are equipped with standard push button override and they can be equipped with lever for manual use. Features -Low ...

Operating pressure: 20 bar - 300 bar

... This is a special non-leak valve for single-action circuits when using a hydraulic jig with a horizontal machining center and implementing a disconnect from the hydraulic pressure source (more than 10,000 ...

Operating pressure: 10 MPa - 31.5 MPa
Flow rate: 60 l/min - 450 l/min

... Manual operated directional control valve is a directional control valve, by operating the handle, the spool moves in the axial direction ...

Operating pressure: 0 bar - 320 bar
Flow rate: 0 l/min - 80 l/min

... AH directional control valve principally consists of a valve body (1), a control spool (5) with two centering springs (4) and either one or two operating solenoids (2+ 3), ...

Operating pressure: 50 bar - 320 bar
Flow rate: 40 l/min

... Directly actuated directional seat valve controlling pressurised media. The valve seat seals hermetically preventing internal leaks. All parts are made of corrosion-resistant materials, and they are ...

Operating pressure: 3,000 psi
Flow rate: 0 us gal/min - 18 us gal/min

... PILOT OPERATED RELIEF VALVE is standard on every SDCF. FULL RANGE PRESSURE COMPENSATED by-pass type flow control valve built in. SDCF REDUCES the number of fittings, plumbing and potential leaks ...

Operating pressure: 250 bar

... The 6URRE 6 is a directional valve with 6 way section that is used for the alteration of the fluid flow inside the hydraulic system. Through this, it provides the movement change of the ...

Operating pressure: 3,500 psi
Flow rate: 20 us gal/min

... Installed in any Location in Valve Assembly Interchangeable Mounting With Other Popular 20 gpm Stack Valves Optional Work Section with Pilot Operated Checks ...

... 1. - High pressure, high capacity and wide range of flow rate. 2. - Norminal diameter from 1/4" to 1-1/4", ISO standard mounting surface of gasket type. 3. - Full ranges of spool type, long service life. ...

Operating pressure: 180 bar - 350 bar
Flow rate: 100 l/min - 250 l/min

... Sectional Directional Control Valves We offer a variety of Sectional Directional Control Valves, for fluid control. With ...

Operating pressure: 0 bar - 310 bar
Flow rate: 0 l/min - 55 l/min

... GDV45 Monoblock Directional Control Valves Features Valve body is made of integral grey cast iron. Spring cap and mechanical detent cap are made from die-cast aluminum. Parallel ...

Operating pressure: 250 bar
Flow rate: 100 l/min

... sectional valves are a standard in winch applications across the marine industry. There are control options for either rotary lever or by-pass flow control in conjunction with excellent ...

Operating pressure: 350 bar
Flow rate: 40 l/min - 60 l/min

... the 1102 model. Diameter of spool 15 mm and stroke 5,5 mm, actuating system by hydraulic, pneumatic, electrical pilot, or by manual lever. A great variety of auxiliary valves exists, ...

Operating pressure: 700 bar - 3,000 bar

... series of valves manufactured by Euro Press Pack. The VL is a manual control valve that is capable of processing single and double acting systems. The VR, on the other hand, is a regulating ...

Operating pressure: 25, 40, 350, 400, 420 bar
Flow rate: 100, 130, 140, 230 l/min

... point for distributors and pump control. Thus the hydraulic system works efficiently and every work section consumes sufficient energy compared to traditional circuits. Load sensing proportional directional ...

Operating pressure: 350 bar
Flow rate: 45 l/min

... of all the spools. Spool construction in steel, hardened and nickel plated. Parallel circuit with single load check valve on pressure “P” line. Tandem circuit available only on the first working section of the 2, 3, 4, 5 and ...

Operating pressure: 2,000, 3,000 psi
Flow rate: 60 us gal/min

... Muncie's MSV selector valve is well suited for a variety of applications. The two position two way valve provides a simple means of directing oil flow into two separate hydraulic circuits or can be ...

Operating pressure: 350 bar
Flow rate: 80 l/min

Operating pressure: 14 bar - 350 bar
Flow rate: 100, 80 l/min

... for the APV section valve (2). Besides manual actuation, there are hydraulic actuation type and electric actuation type of the main spool. Mobile sectional control ...

Operating pressure: 210 bar
Flow rate: 45 l/min

... The MCD20 Series are monoblock directional control valves integrated with parallel circuits. In addition to the standard valve, a flexible fundamental help valve, check ...

Operating pressure: 0 bar - 420 bar
Flow rate: 260, 120 l/min

... sectional configuration; max. inlet flow 260 l/min and 120 l/min per section; max. working pressure 420 bar; manual, hydraulic and electro- hydraulic control; also available in kit form. ...

Operating pressure: 210 bar
Flow rate: 10 l/min

... This valve is a 3 position 4 way manual directional control. Refer to application notes for installation details. Handle rotated full counterclockwise, flows 14 & 2 3. Handle rotated ...

Operating pressure: 700 bar
Flow rate: 17 l/min

... • Advance/Retract operation of single-acting cylinders • Manual Operation • Pump mounting will retrofit on most Enerpac Pumps • User adjustable relief valves allow the operator to easily set the working pressure ...

Operating pressure: 0 bar - 500 bar
Flow rate: 8 l/min

... Double-acting versions These valve combinations can be used to operate double-acting cylinders. A 3/ 2 directional control valve and an intermediate valve ...

Operating pressure: 700 bar

... Hi-Force control valves are designed to provide precise control of the hydraulic system either by accurate pressure or directional flow control. The ...