Metal enclosures

129 companies | 689 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
wall-mount casing
wall-mount casing
48015

Width: 510 mm
Height: 670 mm
Depth: 212 mm

wall-mount enclosure
wall-mount enclosure
BC-RF series

Width: 300, 250 mm
Height: 350, 400 mm
Depth: 160, 180, 150 mm

... is easy to open or close as it will be assembled with handle and hinge type. 2. This swing out panel is for our Nema 4X enclosure and very strong as it is fixed with 4 supports and has good external appearance. 3. It is for R and Q ...

See the other products
BOXCO Inc.
aluminum enclosure
aluminum enclosure
AL series

Width: 46 mm - 313 mm
Height: 51 mm - 403 mm
Depth: 32 mm - 181 mm

... 1. BOXCO's diecast aluminum enclosures have excellent resistance against chemicals. 2. It is sealed enclosure and can be used in wide temperature range. 3. It is proper to be used for indoor, outdoor ...

See the other products
BOXCO Inc.
waterproof enclosure
waterproof enclosure
ALS SERIES

Width: 46 mm - 313 mm
Height: 32 mm - 181 mm

... 1. BOXCO's diecast aluminum enclosures have excellent resistance against chemicals. 2. It is sealed enclosure and can be used in wide temperature range. 3. BOXCO IP66/67 rated waterproof enclosures ...

See the other products
BOXCO Inc.
handheld enclosure
handheld enclosure
Bocube Alu

Width: 86 mm - 173 mm
Height: 121 mm - 299 mm
Depth: 60 mm - 90 mm

... to the Bocube plastic enclosure • All enclosure components made of metal • Many versions are listed under UL file no. 196 706 • Captive lid with smooth surface or recessed membrane keypad area • Hinge ...

See the other products
Bopla Gehäuse Systeme GmbH
wall-mount enclosure
wall-mount enclosure
EJB series

Width: 170 mm - 680 mm
Height: 220 mm - 980 mm
Depth: 152 mm - 487 mm

... Flameproof aluminium or stainless steel enclosure system suitable for assembly of terminals, switches and components > Window optional > External flameproof joint > For gas group IIB + H2 The Ex d EJB series of ...

See the other products
ROSE Systemtechnik
wall-mount enclosure
wall-mount enclosure
HWHK Series

Height: 21 cm - 57 cm

... removed by pulling the stainless steel hinge pin Seamless poured-in place gasket. Collar studs provided for mounting inner panel. Bonding stud provided on door and grounding stud installed in enclosure. Cover and ...

See the other products
Hammond
wall-mount enclosure
wall-mount enclosure
PP-WM series

Width: 16 in
Height: 5, 6, 3 in
Depth: 18 in

... assemblies, and active components. PolyPhaser is introducing a line of cost-effective, ready-to-deploy indoor fiber optic enclosures, each pre-loaded with adapters, pigtail cables, and a splice tray, making installation seamless in ...

See the other products
PolyPhaser | Transtector
printed circuit board enclosure
printed circuit board enclosure
YG-H24

Width: 127 mm
Height: 75 mm

... Surtec 650/Alodine surface treatment If don't find size you need,We can make tooling/sheet metal bending/aluminum plate splicing to realize High Quality Aluminum Junction Box. ...

See the other products
Yongu
19
19" rack enclosure

Width: 600 mm
Depth: 400, 600, 500 mm

... The enclosures are provided in painted steel for "Indoor" applications, but can be manufactured in aluminium or stainless steel for severe "Outdoor" conditions. The enclosure and door are made of steel ...

See the other products
ATOS SAS
connector enclosure
connector enclosure
MKA IVG20

... Bulkhead mounting housing, CKA series, with 1 lever, M20 rear cable entry, size "21.21" Product type - Bulkhead mounting housing Series - CKA Closing type - With 1 lever Size - Size "21.21" Cable entry - Rear cable entry M20 Technical ...

wall-mount box
wall-mount box
JN-P601

... Meter box cover can be made of transparent PC\ABS, Glass-steel, etc. and meter box base with ABS, Glass fiber, Cold rolled steel sheet, Stainless steel plate, Aluminum alloy, etc. The ...

See the other products
JIANAN ELECTRONICS CO., LTD.
wall-mount enclosure
wall-mount enclosure

... This custom CNC machined metal enclosure is made from high-quality aluminum alloy, providing durable protection for electronic devices and industrial equipment. With a precise ±0.01 mm tolerance and a ...

See the other products
HLC METAL PARTS LTD
ATEX enclosure
ATEX enclosure
BNA/8NGEX, BNA/8NYEX, BNB/8NGEX, BNB/8NYEX

... Zone 1-2, 21-22 Gas and Dust) is in continuous development by our R&D Engineers. Switch Disconnectors Regolus Ex Series Enclosures Regolus Ex Series with the largest temperature range: -60°C/+150°C Limit Switches Rotary Gear FGR2 ...

See the other products
Giovenzana International B.V.
rectangular enclosure
rectangular enclosure
Selcast

Width: 72 mm
Height: 47 mm
Depth: 72, 135 mm

... Protection class - IP67 Equipment - Empty and undrilled Material - Cast aluminium ...

wall-mount enclosure
wall-mount enclosure
AL

Width: 330, 50, 150, 64, 98 mm
Height: 45, 58, 75, 80, 230 mm
Depth: 111, 57, 34, 81, 30 mm

... Empty enclosure, with protection class IP66, Aluminium, powder-coated painting, Internal fastening points, for installations in the industrial arena and protected outside areas ...

See the other products
Spelsberg
cylindrical housing
cylindrical housing

... sensitivity to combustible gas in wide range Fast response Wide detection range Stable performance,long life,low cost Stainless steel housing for extremely harsh working conditions Pore Size: 20um 30-40, 40-50, ...

See the other products
HENGKO Technology Co., Ltd.
plastic enclosure
plastic enclosure
apRaspi

... project with Asus Tinker, Arduino, Raspberry PI or Banana PI is finished. But where does the casing come from? apra offers cases for standard boards as sheet metal (aluminium and steel) or plastic constructions. And ...

See the other products
apra-norm Elektromechanik GmbH
wall enclosure
wall enclosure
N3R-5801

Width: 4, 2.8 in
Height: 6, 4.3 in
Depth: 4, 3.5 in

... • Heavy-duty 16-gauge galvanized steel spot-welded construction • Drip-shielded top and seam-free sides, back and front • Hinged cover with weather resistant Neoprene gasket and zinc plated and powder coated pad-lockable draw latch • ...

See the other products
BUD INDUSTRIES
built-in enclosure
built-in enclosure
Z14

... generations of pedestal housings were designed to accommodate. Pedestals that cannot accommodate 160W can result in network outages or shorter equipment lifespans due to over-heated equipment. The Charles Industries’ Z14 pedestal housing ...

See the other products
Charles Industries
rectangular enclosure
rectangular enclosure
Guardian™

Width: 361 mm
Height: 361 mm
Depth: 540 mm

... Sliding label-access door for media changes without full enclosure opening

  • Heavy-gauge 304 stainless steel construction with piano-style hinge


  • Specifications
    Enclosure: ...

    panel enclosure
    panel enclosure
    UltraX

    Width: 436 mm
    Height: 42.5 mm
    Depth: 268.5 mm

    ... cassettes or adapter panels from the T&S Ultra family, the enclosure can achieve a patching density of up to 256 fibers within a 1U space. The UltraX comes in two versions: version A for metal adapter ...

    wall-mount enclosure
    wall-mount enclosure
    aluCLIC

    Width: 90 mm - 130 mm
    Height: 70 mm

    ... The quick-change enclosures IP 66, IP 67 - Optional: IP 69K The key product features: • Enclosure material: diecast aluminium • Enclosure surface: powder coating, RAL 7035 • Lid fixed from the ...

    See the other products
    ROLEC Gehäuse-Systeme GmbH
    wall-mount enclosure
    wall-mount enclosure
    HLG series

    Width: 600 mm
    Height: 700 mm
    Depth: 210, 60, 130, 90 mm

    ... deeper enclosures can also be connected from the top or bottom Technical data • Protection class:according to IP54 • Material:Profiles: extruded aluminum profiles, front and rear panel: 3 mm aluminum ...

    aluminum casing
    aluminum casing

    ... Miniature aluminium casing Small aluminum enclosures provide rugged protection for electronic equipment. The small size is ideal for applications where space is limited. The aluminum ...

    See the other products
    Fischer Elektronik GmbH & Co. KG
    transformer box
    transformer box
    JP

    ... protection), and reactive compensation of capacitance. The box is made of stainless steel, and its surface is subject to treatment to prevent glaring and light reflection. The box could prevent rain, dust and ...

    wall-mount enclosure
    wall-mount enclosure

    Width: 200 mm - 1,000 mm
    Height: 200 mm - 1,200 mm
    Depth: 150 mm - 350 mm

    Mild steel, tight tolerances on bending, welding, powder painting, gasketing, IP 66.

    See the other products
    Electro Alfa International
    exhibit your products

    & reach your clients in one place, all year round

    Exhibit with us
    DirectIndustry RFQ: Free quotation comparison tool
    Receive and compare quotations for free
    Describe your project
    We select
    the best suppliers
    Compare quotations and complete your purchase