Working height: 120 mm - 1,200 mm
Load: 2,800 kg
... added to the basic design in key places. Also very important to note is that the arms are 10cm longer than the standard, the platform itself is also 110cm wide, which is typically 10cm more than most other 2800kg polishing bridges. A ...
Oreiko
Working height: 550, 1,100 mm
Load: 250 kg
L'Echelle Européenne
Working height: 8,800 mm
Load: 120 kg
... from the platform, so there is no need for another driver. The unit is equipped with hydraulic support outrigg. It is approved for use with Wille 365 – 865 models. The attachment is connected to the rear lift of the base machine. Platform ...
Load: 3,000 lb
... self-contained powerpack with pendant control and battery included on powered models • Personnel basket optional–ideal for maintenance work • Recommended for use with the JB-4 and JB-4R because they offer hydraulic-powered tilt and ...
Air Technical Industries
... Automatic lifting scissors Mechanical support system and height control of the tube for the different diameters. Motorized component with a spindle that acts on a trapezoidal system for the height adjustment of the lateral rollers, which allow the ...
Working height: 6.6, 8, 13.8 m
Load: 200, 230, 320 kg
... Scissor Lift is now a popular model of Aerial Work Platform,which is used for aerial working like ceiling construction, sign hanging and other maintenance ...
Working height: 8.2 m - 10.2 m
Load: 180 kg - 250 kg
... be used to pick up to 3 people with some equipment at a time. It can also accommodate up to two people on its scissor lift platform. ...
UNAC
Working height: 140 cm - 440 cm
Load: 300 kg
... ATEX operated, allows you to work easily at any height on trucks and coaches, inside and outside the booth. Safety system to lower the platform from the bottom. Large platform with capacity for 2 people ...
Working height: 14.2 m - 20.1 m
Load: 200 kg - 1,150 kg
... the pole is erected, further assembly work takes place from the man basket. In urban environments the HUDDIG Lift is unbeatable when working on street lighting and facade work. HUDDIG Lift is also ideal ...
Load: 300 kg
... Platform for stacker, useful for carrying out repairs and maintenance work in areas located at a certain height. Constructed of profiled steel with non-slip work platform and protection ...
Working height: 12 m - 17 m
Load: 200 kg
HANGCHA FRANCE
Working height: 4.3 m
Load: 454 kg
... • Field-proven articulated DUX P1- carrier with clean emission diesel engine and heavy-duty powertrain • DUX DBB14 aerial self-leveling basket boom with 9 300 mm (30’ 6”) maximum vertical reach and 454 kg (1,000 lb.) safe lift capacity • ...
DUX MACHINERY CORPORATION
... This type of lifting platform is designed and manufactured to be used as access equipment by people in height, in work operations and maintenance.They can be moved as long as they are towable (they are prepared for this ...
Working height: 8 in - 53 in
Load: 440, 660 lb
... pulley that is attached to the platform. The platform rolls up the dual steel uprights in a secure fashion with three points of contact per upright. An adjustable release valve allows for controlled descent of the ...
Working height: 300 mm
Load: 2,750 lb
... our eCart Series is the integrated Scissor Lift option! The new LOGO!MAT Scissor Lift is an integrated lifting platform with a stroke of up to 300 mm. The applications and benefits of the Scissor ...
Working height: 880 mm
Load: 2,800 kg
... This type scissor car Lift could be movable according to the clients requirement, easy to move and install it. very useful. Mechanical safety system Thin structure(min height 140mm) Movable, no need to fix on a special place Adjustable arms, applying ...
Working height: 6.52 m
Load: 272 kg
... 2M, the platform will stop for 3- 5 seconds, to ensure other people around pay attention and leave, to avoid the harm to the operator. High Efficient Performance Strong Gradeability 25% gradeability makes Royal scissor platform ...
Royal
... The Work Platform from the CRM Series is a fork-mounted platform designed to perform regular maintenance. It is also applicable to applications that require inspection and stock-taking. This platform ...
... Freight lifts are used whenever loads must be moved over several levels. Installation can be, for example, in an on-site shaft or by using a steel grid enclosure. The photo shows an example of a simplified freight lift, which is installed without a shaft. ...
Büter Hebetechnik GmbH
Working height: 45'00"
Load: 150 kg
... construction work. Telescopic Boom Aerial Platform is best solution to achieve desired out-reach.With auto level bucket throughout the aerial platform movement, JIC access ...
javaid Industrial company
... company specialized in the design and construction of: - Truck mounted aerial platforms from 21 to 72 meters - Fire Fighting platforms from 28 to 72 meters - Spyder platforms from ...
Cela
... Aerial Work Platform 1.The product is designed to meet the special need of our customer 2. With large capacity and good stability of operation 3. It can be applied to the inspections and maintenancec ...
... The KUKA Triple Lift is a mobile lift platform for working at heights of up to eight meters. The Triple Lift is continuously adjustable via hydraulic telescopic cylinders. It remains ...
Working height: 3 m
Load: 680 kg
... Used scissor Lift Diesel 4x4 GENIE GS-4390-RT Stock: AZ 11812-V33145 Year 2007, 3 467 Hours Capacity 680 Kg? ( 7 person ) Lifting: Scissor Working height : 15.11 m Closed height : 3.00 m Transport ...
AZ RAMP
Working height: 2.17 m
Load: 450 kg
... Used Electric scissor Lift Haulotte Compact 10 Stock: AZ 11812-V34002 Year 2007, 595 Hours Capacity : 450 Kg , ( 2 person ) Lifting: Scissor Working height : 10.14 m Closed height : 2.17 m Transport ...
AZ RAMP
Working height: 12 m
Load: 300 kg
... Used Electric scissor Lift Haulotte Compact 12 Stock: AZ 11812-V34024 Year 2007, 814 Hours Capacity : 300 Kg , ( 2 person ) Lifting: Scissor Working height : 12.00 m Closed height : 2.38 m Transport ...
AZ RAMP
Working height: 2,830 mm
Load: 300 kg
... Pneumatic operated mobile work platform (MEWP) for preparation and working areas. Features 4 Wheeled mobile frame; Equipped on board with compressed air connection ...
GIULIANO INDUSTRIAL S.p.A.
... transportation of the electronic and operator devices such as PC and touch screen. It is a wheeled kiosk with a rectangular platform structure which balances the strength of the kiosk holding the electronic devices. It has a weight carrying ...
Load: 3 t
... The SURI truck is a heavy-duty utility vehicle in underground mines. Good for transportation of materials or fortification works, pipe installation or fans installation, SURI adequately provided for these applications. Their capacity ...
Working height: 21 m
Load: 400 kg
... sockets on the platform -220V for power outlets at Platform -Reliable hydraulic and electrical system -Increased maneuverability -Warning alarm in landing Optional Accessories -Operating voltage 220V AC -24V DC operation ...
CAGSAN LADDERS
the best suppliers