Modbus I/O

46 companies | 176 products
32 digital inputs I/O module
32 digital inputs I/O module
RT131-1BL00-MB

Profibus is also a popular modern industry Fieldbus developed on RS485, according to the ISO / OSI reference model standard, becoming a German standard when published in DIN19245 in April 1991. With the maximum transfer rate of 12Mbps ...

analog I O module
analog I O module
1000

Top performance in the tightest of spaces: I/O system 1000 At the very first glance, the I/O 1000 range impresses with the narrow design of its I/O modules, which can take up to 8 connections. They only require 12.5 mm of space on conventional ...

analog I/O system
analog I/O system
G series

Distributed IO for smart solutions and CODESYS control G series distributed IO The G series distributed IOs provide you with supreme field and bus connectivity for smart integrated solutions through a wide range of IO modules for almost ...

digital I O module
digital I O module
MX series

MX Series I/O Modules Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement B+ or ...

digital I/O module
digital I/O module
470E

Designed using the Maxim MAX197 successive approximation-type A/D chip, the SeaI/O-470E provides eight differential or 16 single-ended 12-bit inputs and two 12-bit D/A output channels. The A/D inputs are software selectable for 0-5V, ...

analog I O module
analog I O module
MIO 12-PT

The Produal MIO 12-PT is an I/O module that is used for temperature measurement. It has the ability to read 4 Pt1000 or digital inputs and uses 4 analog outputs that ranges from 0V up to 10V. Each individual triac output from A1 to B2 ...

remote I/O module
remote I/O module
M100T

Ethernet Remote IO Module (2DIN+2AIN+2DO) M100T Ethernet Remote I/O Module provides 2 optical-isolated digital inputs, supports Max. 700KHz high speed pulse counter, 2 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA ...

digital I/O module
digital I/O module
W-M2J502

4-Ch Digital Input & 2-Ch Relay Output with PoE PD Module(Available Soon) 4-Ch Digital Input & 2-Ch Relay Output Support PoE PD High Isolation: 2500V Communication Protocol: Modbus TCP Support Dry and Wet Contact

See the other products
ADVANIO TECHNOLOGY Co., Ltd.
analog input module
analog input module
SM1

2-channels module of analogue inputs The SM1 - 2 channels module of analogue inputs is destined to convert standard signals, resistance or temperature signals into numerical data accessible through the RS-485 or RS-232 port by means ...

See the other products
LUMEL
digital I O module
digital I O module
GN-9386

EtherCAT network adapter EtherCAT slave 2 x Ethernet 10/100Mbps Up to 63 expansion modules 128 bytes/slice 10pt removable terminal block The G series distributed IOs provide you with supreme field and bus connectivity for smart integrated ...

See the other products
Beijers Electronics APAC
digital input module
digital input module
IO-16DI

16 digital inputs DESCRIPTION : These modules are used with HMI, PLC or SCADA via Modbus RTU protocol. IO Studio is its PC software for setting communication. Data Acquisition Studio is its PC software for DAQ purpose. As a professional ...

See the other products
BRAINCHILD ELECTRONIC CO., LTD
analog input module
analog input module
TPIv 400 | µCv 3012

Features Universal power supply: 20 to 250 Vac and 20 to 250 Vdc Process input: (TPIv400/450) (pCv3012/3212) ±100mV, ±1V, ±10V, ±270V, ±20mA Universal input: (TPIv401/451)(pCv3011/3211) ±100mV, ±1V, ±10V, ±270V, ±20mA, Pt100, Ni 100 (2, ...

See the other products
ARDETEM SFERE
digital I O module
digital I O module
EMOD 3014

TECHNICAL FEATURES > Inputs: 4 RTD channels (PT100, PT1000, Ni100, Ni1000) > Maximum speed: 38.4 kbps > Distance reachable: 1.2 km > Power supply: 10 ... 30 V > Galvanic isolation: 200 Vac 50 Hz 1min > Communication: RS485 DIMENSIONS > ...

See the other products
ELCO Elettronica di A. Ligabue e C. snc
analog output module
analog output module
MPNC035

The MPNC035 module has 4 independent and individually programmable analog outputs for generation of voltage​​, current and PWM outputs. This module can be used as extension of PLC (TPAC) / operator panels (TP) and any other panel that ...

digital I O module
digital I O module
Barix R6

The Barix R6 is a universal, low cost, small form factor I/O extension device which connects to a host via Modbus/RTU. The six 250V/16A rated relays are controlled using Modbus/RTU commands via the serial interface Special power savings ...

See the other products
Barix
analog input module
analog input module
240 series

240 Series Features Two or eight cryogenic temperature sensor inputs Supports industry-leading Lake Shore Cernox, platinum, and other RTDs, plus DT-670 diodes Precision measurement circuitry with on-board conversion to calibrated ...

analog I O module
analog I O module
Pyrocontrole

The I/O Modules PDM are high performance, economical and flexible signal converters in the PDM input/output systems that can be adjusted to meet your demands. It has an extensive range including digital, analogue and temperature. It features ...

remote I/O system
remote I/O system
CPX-E/VTUG

The package offered by Festo, consisting of the modular automation system CPX-E and the universal valve terminal VTUG, is more compact and cost-efficient than other control cabinet solutions. • Compact and space-saving • Easy mounting ...

distributed I/O module
distributed I/O module
88DMM2 series

Thickness:20mm Description:Distributed I/O optical transmission - master module - Ethernet communication Application:Data transmission Series:88DMM2 Colour:black

analog I/O module
analog I/O module
ADCOM

ADCOM is a versatile interface which provides up to 2 analog inputs and 4 digital I/O. ADCOM can be used in distributed automation systems based on the Modbus protocol or on the CANopen standard. It is also possible to communicate ...

analog I/O module
analog I/O module
MXC700 BIO

MXC700BIO is an electronic interface module that can be mounted on standard DIN rails and is designed to control industrial or building automations and domotics systems. Featuring a standard Modbus protocol, the MXC700 module can be ...

digital I O module
digital I O module
DAU01-MODx series

Modbus RTU and TCP/UDP protocols supported• Built-in web server for web-based remotely I/O access• Three control ports with Ethernet, USB and RS485/RS422• Flexible adapting network deployment• Modbus gateway function (Ethernet/USB ...