... device has 4 open drain outputs. All they are configurable either as standard digital outputs (On/Off) or as PWM outputs. In PWM mode, the outputs supply up to 2000Hz ...
... The DAT 3022 gadget creates up to 2 output analog indicators from digital orders. The Data values are transmitted with MODBUS RTU/ASCII protocol on the RS-485 system (RS-232 interface is accessible). ...
DATEXEL SRL
... monitor - Yes Output range - -10.8 V ... +10.8 V / 0 V ... +10.8 V or 0 mA ... 21.6 mA / 3.8 mA ... 21.6 mA Resolution - 16 bits Refresh time for all channels - minimum 100 µs (corresponds to the S-DIAS cycle time) Output ...
SIGMATEK GmbH & Co KG
... Module with 4 contact outputs for alarm forwarding. The contact outputs are toggle switches (NO / NC). Characteristics • Product type: Datalogger • Logger/ module type: Alarm module ...
... Wherever electrical circuits need to be controlled and switched, a relay output module such as the RevPi RO is used. This module makes it easy to switch on and off motors, valves, lighting systems, ventilation ...
... The P371 digital output slice connects the binary control signals from the Motion Coordinator to the machine’s output devices at 24V dc. All 16 outputs are source (PNP) type and have electrical isolation. ...
Trio Motion Technology
... The GRV-OVMALC-8 analog output module has 8 channels, individually configurable for any one of seven voltage or current output ranges: 0 to 5 VDC 0 to 10 VDC -5 to +5 VDC -10 to ...
Opto 22
... and off using the touch dimmer function in the living room (extension unit input), via the push-buttons on the top of the module or via the 1-Wire interface. Any push-buttons from all switch ranges can be used for the touch dimmer function. ...
... The analog output module 4-channel is equipped with 4 outputs. The output signal, 0(2) to 10 V or 0(4) to 20 mA, can be configured individually for each channel. The analog ...
... 8 relay outputs on the device can be remotely controlled with MODBUS RTU communication. When a relay is activated, it outputs the voltage connected to the COM terminal and the corresponding output LED ...
... The SDM-AO4A module increases the number of continuous analog outputs available to a datalogger. These outputs are used for proportional control or driving strip charts. Benefits and ...
... The MPNC035 product is an expansion module for analog outputs. The MPNC035 module has 4 independent and individually programmable analog outputs for ...
... The PVE output module has been specially developed to control Danfoss® PVG valves . It can be operated on SAE J1939 networks. The module enables a total of 8x PVE (PVEA, PVEH, PVES) or 6x PVEO actuators ...
Data Panel GmbH
... 16-channel Non-isolated Open Collector Output Module Main Features - Digital Output Channel: 16-channel Open Collector - Max Load: 30V, 100mA - Direct drive power relay module - ...
... Compatible with Modbus RTU (RS-485) Master devices, 15x Transistor output, PNP/NPN output selection, Mini USB-USB2.0 (Software Download/Configuration), Modular Connection (Maximum 16 devices), Snap-in ...
... Small space requirement. • Direct coupling to master switch with easy adjustments for providing offsets in output. • A proportionally smaller output voltage change is provided from 0° to 20° rotation, increasing safety ...
... voltage 24V= • LED for indicator output • 1 potentiometer power consumption 0,5W nominal output relay specification max. 5A 230V~ expected life time SPNO output transistor ...
... current output can be programmed individually. The X-417 is designed for remote connectivity from the ground up. Industrial Analog Output Control The X-417™ module has up to 5 analog ...
... Distributed Clock1ms Surge protection10KV Transmission speed100 Mbps I/ O isolation voltage3750Vrms Output typeNPN: open collector Darlington transistors Switch capacityEach output ...
Taiwan Pulse Motion
... 4 Analogue outputs module. Available in CANBUS or MODBUS RS485 versions. Device able to provide voltage, current signals and current loop, using four different and galvanic insulated channels and ...
... bit, digital to analog outputs -Double-buffered allowing simultaneous update of all DACs -Analog output ranges of 0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V -Single-ended and ...
ACCES I/O Products, Inc.
... 16 digital outputs DESCRIPTION : These modules are used with HMI, PLC or SCADA via Modbus RTU protocol. IO Studio is its PC software for setting communication. Data Acquisition Studio is its PC software ...
BRAINCHILD ELECTRONIC CO., LTD
... . It is a digital output module that has panel zones which can bbe expanded up to 256 with special box. It also features up to 1000 event log memory and relay output card, 8-way. Furthermore, the device ...
... the digital input, and the digital input has a counting function, which can be used as a pulse counter input,The digital output can control the intermediate relay or indicator output, ...
... Analog Output Module Current Output Capacity 500Ω Voltage Output Capability 10V @10mA 8 LEDs as Analog Output and Fault Indicators Disconnection Detection 4~20mA Output ...
ADVANIO TECHNOLOGY Co., Ltd.
the best suppliers