- Hydraulics - Pneumatics >
- Filter and Separator >
- Particulate filter
Particulate filters
Operating pressure: 100 Pa
Flow: 700 m³/h - 3,600 m³/h
... the capture of these coarse particles so as to prolong the life of the electrostatic filters, reducing the accumulation of heavy substances in the electrostatic filters, so that they can work for a longer ...
Particle filter with special snap-in connector for dusts, fumes, mists. The cartridge shall be used in pairs with half masks DUETTA and DUO or full face masks type TR 82, TR 2002 CL2 and TR 2002 CL3 with DUPLA adapter.
... and smelters. Features 100% PVC-Free®. Use with Moldex® N95, R95 or P100 filters for even greater flexibility. Use with #8910 N95 or #8940 P100 filters against particulates.
Moldex-Metric europe
HEPA Filters E10, E11, E12, H13, H14, U15, U16 and U17 For applications in clean rooms for research, medicine, pharmacy, electrical engineering or microtechnology we offer high-efficiency particulate ...
Operating pressure: 0 bar - 160 bar
Filtration size: 60, 2, 25 µm
... Very quick and easy filter changes without tools Low dead volume Variable wall-mounting via spacer block Ability to (auto) Condensate drain through connection thread (G3/8) inside the filter cover Bypass ...
... with PRAB’s line of paper bed filters. Standard paper bed filtration systems are available with flow rates up to 130 gpm with different classes of filter fabric allowing for adjustments of micron clarity. ...
... wide variety of contaminants. Our filter cartridges protect against dusts, particles, and mists, while our chemical cartridges protect against gases and vapors. Combination cartridges deliver protection from both particulate ...
... lifetime of the particle filters SR 510 P3 R and SR 710 P3 R, combined filter SR 299-2 ABEK1-Hg-P3 R and SR 599 A1BE2K1-Hg-P3 R. The prefilter is placed in the prefilter holder and then snapped on to ...
Sundström Safety AB
... particle filter should be combined with pre-filter SR 221, which will thereby extend the life of the particle filter. The SR 500/SR 500 EX fan should always be used with two particle ...
Sundström Safety AB
Fluid temperature: -10 °C - 55 °C
... separate particle filter, i.e. it cannot be combined with a gas filter. The filter is of P3 R* type and provides protection against all types of particulate pollutants. ...
Sundström Safety AB
Operating pressure: 25 bar
Fluid temperature: -30 °C - 180 °C
Strainer for liquids and gases sturdy construction different materials different mesh sizes magnet separator (with SFM) Operation: Inside the strainer SF, SFD and SFM a screen basket is fitted to retain solids. Additionally ...
Operating pressure: -0.5 bar - 0.8 bar
The high-pressure filter is used in all those machines operating with air in their system, therefore needing cleaning systems to filter the air before reinserting it in the ambience. For this reason, ...
Operating pressure: -0.5 bar - 0.8 bar
... jet of air cleans cyclically the filtering fabric. The low-pressure jet filter uses compressed air at 0,5 – 0,6 bars. The air enters the head filter, which serves also as reservoir, ...
Operating pressure: -0.5 bar - 0.8 bar
... passes through filtering sleeves, leaving the dust on their external surface. A temporised compressed air jet manages to clean upstream the filtering fabric. We call “special filters” ...
Flow: 10 m³/h - 300 m³/h
High Extraction Magnetic Filter(HEMF) is suitable use for processing fine particle materials, especially purification of the non-metal mineral, remove magnetic particle(iron ore, Titanic iron ore), such as feldspar, quartz, ...
Flow: 10 m³/h - 300 m³/h
Lab-Scale High Extraction Magnetic Filter HEMF is born for fine-grained non-metallic mineral purification, especially silica sand, kaolin, feldspar, nepheline, beach sand, sea sand and so on. It can also be applied for ...
... grids influenced by a magnenetic field created by the coil. The filter box keep the iron-particles .A special cycle of demagnetization periodically cleans the filter box. The FVP filters ...
Filtration size: 7 µm - 150 µm
The belts for continuous and discontinuous vacuum belt filters are matched to the requirements of the system, and the customer’s needs. Belts can be manufactured in widths up to 6 m. As well as our innovative closure ...
Operating pressure: 110 Pa - 400 Pa
Flow: 150 m³/h - 2,085 m³/h
... highest efficiency with adapted nominal airflows Pharmaceutical technology Description Filter classes H14-U16 Structure/Media high-performance filter media with spacers of thermoplastic ...
Operating pressure: 800 Pa
MULTIFIL GAS TUR8INE Filters remove airborne particulate matter from combustion engine intake air, providing full protection from foulding, corrosion and erosion of the turbines key components, MULTIFIL ...
Operating pressure: 0 psi - 250 psi
Filtration size: 5 µm - 40 µm
Flow: 22 ft³/min - 24 ft³/min
Parker's 14F is a miniature particulate filter that delivers high moisture removal in a compact package. This type of filter is generally used in industrial applications where liquid ...
Watts Fluid Air
The tilting pan filter has been part of our product range for over 50 years and there are over 300 tilting pan filters installed worldwide. This filter is used primarily in the manufacturing ...
Operating pressure: 3,000 psi
Filtration size: 0.5 µm
Flow: 0.5 l/min - 40 l/min
... 6200 - "Tee" type filter. The Series 6200 filter provides the reliability of Mott precision porous metal media in a compact Tee Type filter housing, that allows easy element changeout ...
Mott
Operating pressure: 0.35, 0.7 bar
Filtration size: 10, 40 µm
... breather caps have two main goals: • They avoid the introduction of large dirty particles or objects into the tank. • They filter and clean the air exchanged between the tank and the atmosphere when there are flow ...
Flow: 1 m³/min - 4 m³/min
Fluid temperature: -30 °C - 120 °C
Mikropor’s air intake elements are designed for the removal of dust or particulate in the air intake systems of compressors, machines, pumps, blowers, etc. Based on the density of the dust load, Mikropor offers ...
Operating pressure: 90 psi - 115 psi
... Costs Because each Modu-Kleen Series 669 bin vent filter is a separate operating unit, you can quickly determine when a filter needs changing. And only that filter has to be replaced, ...
DESCRIPTION The Apollo® YCS (612) Carbon Steel Wye Strainers are designed with large area screens to protect piping systems and process equipment from unwanted foreign particles with minimum pressure loss. FEATURES • Body is ASTM ...
Flow: 0.5 us gal/min
... System II utilizes the S-101 carbon block pre-filter to reduce chlorine tastes and odors and other particulate matter in the water. The system’s Thin Film Composite (TFC) reverse osmosis cartridge then ...
... performance minimize downtime lower maintenance costs over the filter’s lifetime IDEA: OEM &ODM Variey 316L Stainless Steel Filter and Elements Over 20+Years Design Sintered Filters ...
Operating pressure: 37, 135 Pa
Filtration size: 0.3 µm
Flow: 30, 95 l/min
The RSG P3 Plastic Filter is a HEPA filter with an absorption capacity of 99.997%. In addition it is as a parallel pleated high-efficiency particulate filter (P100/P3) ...
RSG Safety B.V.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining