Round pipe expansion joints

Nominal diameter: 800 mm - 1,200 mm
Operating temperature: -40 °C - 80 °C
Pressure: 16 bar

Rubber expansion absorbers are designed to compensate the temperature deformations in main pipelines with an internal from 800 mm to 1200 mm, for designed operating pressures up to 1.6 MPa. The devices ...

Nominal diameter: 25 mm - 150 mm
Operating temperature: 180 °C

... excellent flexion capabilities with high corrosion resistance. The ARMYLOR compensators and bellows compensate for the thermal expansion that occurs in pipelines. Each unit has three and five convolutions bellows. ...

Nominal diameter: 15 mm - 500 mm
Length: 35 mm - 230 mm

PTFE-expansion joints, 2 convolutes (PN 10) Lining-Materials: * PTFE (virgin or conductive) Different lining thicknesses and flange connections upon request. Flange design: * loose-loose Material: ...

Nominal diameter: 65 mm
Operating temperature: -10 °C - 100 °C
Pressure: 10, 16 bar

Compensators made of steel (electro galvanized) DN65, sleeve EPDM flange acc. DIN EN 1092-1 PN 10/16 sleeves: - EPDM media: - liquid media and non-hazardous gases (no steam) design: - straightway form product feature: - Compensators ...

Nominal diameter: 20 mm - 1,000 mm
Operating temperature: -40 °C - 130 °C
Length: 130 mm - 300 mm

... and pipe systems – with and without tie rods. It is also possible to provide expansion joints with special accessories in order to fully exploit the advantages of the expansion ...

... packing to minimise maintenance. The Expansion Joint is available with flanges or pipe ends that are bevelled for welding also they can be ordered with a restriction device. Once fabricated ...

Nominal diameter: 80 mm

Expansion Compensator VARICOMP® The innovative VARICOMP® Expansion Compensator is used for compensating expansions and tensions in pipe systems resulting from temperature ...

Nominal diameter: 2,400 mm
Operating temperature: 729, 343, 538 °C
Length: 620 mm

... This type of Expansion Joint is made up of one single bellows equipped with floating flanges. MTE This type of Expansion Joint is made up of one single bellows fitted ...

Nominal diameter: 15 mm - 3,000 mm
Operating temperature: 1,000 °C

Corrugated tube expansion joints are single or multi-layer stainless steel expansion joints with higher expansion absorption and lower ...

Operating temperature: 120 °F
Length: 20'00"

... mechanical joint, furnished in pipe sizes 4” to 12” and in fitting sizes 4” to 48”, is a flexible stuffing box type connection used primarily in underground service. The AMERICAN mechanical joint ...

Nominal diameter: 1.5 in - 12 in

Axial expansion joint PN10/16 flanged connection • Standard use applications Operating conditions PN10/16 flange dimension zinc electroplated carbon steel Bellow materials : DIN 1.4541/AISI321 ...

Operating temperature: 180 °F - 400 °F

Alleviate piping stress, noise and vibration Permit axial compression and elongation Permit lateral and angular movement Are non-corrosive and abrasion-resistant elastomers Full face integral flanges, ...

Nominal diameter: 20 mm - 200 mm
Operating temperature: -10 °C - 100 °C
Length: 70, 90 mm

The W8 series joints are suitable to dampen vibrations and noise. YES: for water plants, pumping stations, conditioning and heating, industrial and agricultural purposes, compressed air circuits. NO: for compensation ...

... the ambient temperature and the installation of the pipeline, the pipeline will produce a certain amount of elongation;Due to the settlement and deformation of the foundation, the pipeline will deviate ...

Nominal diameter: 25 mm - 3,000 mm
Operating temperature: -20 °C - 400 °C
Pressure: 6 bar - 64 bar

... contact surface of the fluid. Contact surface of the expansion joint can be minimized by using axial expansion joints with liner. Application of Axial Expansion ...

Nominal diameter: 15 mm - 700 mm

These expansion joints are designed to take up linear movements in a piping system. The advantage of axial expansion joints is the fact that they take ...

Operating temperature: 0 °C - 700 °C

MULTILAYER THRUST WITH OR WITHOUT CONVEYOR OR ANGLE AND UNIVERSAL (DOUBLE BELLOWS). DIMENSIONS: DN 9 to DN 1000. MAXIMUM OPERATING TEMPERATURE 700 ° C. RUNS ON YOUR DESIGN

Nominal diameter: 15 mm - 800 mm
Operating temperature: -196 °C - 550 °C
Length: 50 mm - 500 mm

Axial expansion joints are designed to accept movements of extension and compression in the axis direction. The length of expansion joint in neutral position is called ...

Nominal diameter: 20 mm - 65 mm
Operating temperature: -10 °C - 120 °C
Length: 200, 240 mm

Double Sphere Union Type Rubber Expansion Joint Working Pressure and Température Working pressure PN16. Explosive Pressure 48 bar. Vacuum Rating 400mmHg. Température from -10*0 to 120*0 for EPDM. Température ...

Product description: Axial expansion joint with fixed flanges, internal sleeves on request. HFA / MFA

Nominal diameter: 76.2 mm
Operating temperature: -55 °C - 150 °C
Length: 152.4 mm

he Style 204 family of spool-type expansion joints are manufactured with the industry standard narrow arch design. This style is intended to be used in dynamic conditions where both pressure and vacuum ...

Nominal diameter: 32 mm - 400 mm
Operating temperature: -10 °C - 110 °C
Length: 95 mm - 265 mm

Before to assemble the joint at the pipeline check inside the body to be completely clean, possible impurities have to be removed in order to ensure a right functioning. If compressed air is at your disposal, ...

Nominal diameter: 25 mm - 1,000 mm
Length: 100 mm - 300 mm
Pressure: 10, 16 bar

Flapcon EJ10 Series Rubber Expansion Joints can use for absorbing longditudinal axial movements in pipe lines, lateral movements in high pressure and angular movements in defective pipe ...

Nominal diameter: 32 mm - 900 mm
Operating temperature: -10 °C - 90 °C
Length: 95 mm - 255 mm

... mechanical equipment. Reduce stress compensating for axial, leteral and angular movements caused by contraction and expansion of pipe lengths due to thermal changes.