Submersible pumps

Flow: 0 m³/h - 200 m³/h
Head: 3 m - 671 m
Power: 0.55 kW - 190 kW

MAT 6", 8" and 10" submersible pumps, thanks to their design of the impellers and diffusers , adapt to medium flow rates and high heads. Designed for pumping clean water in civil and industrial applications ...

Flow: 2 m³/h - 15,000 m³/h
Pressure: 10 MPa
Head: 0 m - 1,000 m

ASP5560 series pump is multistage、radial-sectional vertical barrel pump.It is designed and manufactured according to API610 version 10《Centrifugal pumps for petroleum petrochemical and ...

Flow: 0 l/min - 100 l/min
Head: 6 m
Power: 150, 300 W

Dewatering Pumps PXJ-150 ●For residual water up to 3mm water level ●Easy to place in narrow space such as sumps or wells with slim body ●Three kinds of connection dia, 1″, 3/4″ and 1/2″, are available with one delivery flange

Flow: 5.5 m³/h
Head: 7 m
Power: 300, 160 W

... integrated non-return valve puddle pump FSP 330 with ENS 1.1 fits into pipes with an inner diameter larger than 200 mm protection grade IP 68 – fully submersible Application portable ...

... the pump body, it can be installed in pools or tanks of different depths. The rotor and stator parts are inserted into the pool, and the reduction motor is located above the liquid level without contacting the medium. ...

Flow: 3,500 m³/h
Pressure: 3.5 bar
Head: 30 m

... slurry pump is a type of centrifugal pump, designed for pumping liquid containing solid particles in mining, metallurgy,coal washing ,sewage water treatment,power plant,dredging.and chemical and petroleum industries ...

Flow: 20 l/min - 24 l/min
Length: 200, 169 cm
Width: 97, 100 cm

Our ‘HS Pumps’ are designed for working at greater depths and include a choice of solids, drainer, high head or chopper pumps. Options include multiple hydraulic circuits, up to 100m hydraulic hoses, ...

Flow: 0 m³/h - 85 m³/h
Head: 0 m - 565 m
Power: 3 kW - 45 kW

... and vibration free smooth operation. The Pumpsets are compact and slim and can be easily installed in narrow wells. Power consumption & operating cost is less due to high pump efficiency. All pumps ...

Flow: 25,000 l/h
Head: 5 m - 7 m

Submersible pumps with high capacities are used for the removal and drainage of water from buildings and trenches without using electric power. These pumps have certain advantages that ...

Flow: 5 l/min
Pressure: 2 bar - 7 bar
Head: 70 m

New pump line with a brand new designing that offers reinforced pumping potentials. The updated designing provides even bigger performance provided with economy Benefits • Optimal performance • Economical air consumption, ...

Flow: 0 m³/h - 42 m³/h
Head: 1.5 m - 16 m
Power: 0.75 kW - 1.5 kW

SUBMERSIBLE ELECTROPUMPS GXB USES: The GXB serie submersible electropumps is widely used in household systems,in handcrafts and industry to dispose of clean or slightly dirty water or other liquids. ...

Flow: 10 l/min - 400 l/min
Pressure: 8, 14 bar
Head: 14 m - 106.9 m

Stainless steel multistage vertical pumps. Pumping of clean non-loaded fluids, pressurizing system, irrigation, drinking and glycol water, water treatment, food industry, heating and air conditioning, washing system.

Flow: 9 m³/h - 2,500 m³/h
Head: 12 m - 465 m
Power: 7.5 kW - 410 kW

... has simple structure with motor and pump integrated, easy to install, maintain or disassemble, covers little floor space. It works safely and reliably, causes no pollution to water source. QJ Deep Well Submersible ...

Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m

... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump ...

Flow: 6 m³/h - 4,800 m³/h
Head: 4 m - 60 m

Capacity: 6-4800m³/h with 2950RPM,1450RPM,980RPM,740RPM,580RPM, Head: 4-60M Medium: Sewage (PH5-9) Medium temperature: ≤40℃ Material: Cast Iron, SS Motor: 380V,415V,660V;IPX8;50HZ,60HZ;

Flow: 0.4 m³/h - 65 m³/h
Head: 6 m - 305 m
Fluid temperature: -15 °C - 105 °C

The non-self-priming vertical immersion multistage centrifugal pump, and the motor shaft is directly connected with the pump shaft through the coupling. The impeller guide vane is made of stainless Steel ...

Flow: 0 m³/h - 30 m³/h
Head: 0 m - 50 m
Height: 226 mm - 960 mm

Summary of pneumatic air operated diaphragm pump QBY pneumatic air operated diaphragm pump is the one of the most innovative pump. For all kinds of corrosive liquid, with particles, ...

Flow: 0 l/min - 50 l/min
Pressure: 0 bar - 220 bar

Our Hydraulic submersible pumps HB – HC – HV are particularly suitable to drain flooded areas. As they have no electrical components, they are completely SAFE to work under water. The water hose is available ...

Flow: 82, 36, 14 us gal/min
Head: 0'00" ft - 240'00"

... eliminate suction lift limitations in deep manholes or excavations over 25 feet deep, the Hydraulic Submersible pump handles up to 4.25 inch solids and pumps efficiently at heads up to ...

Flow: 0 l/min - 820 l/min
Pressure: 0 bar - 50 bar

Pumped Liquid Hydraulic oils, synthetic hydraulic liquids, native oils, lubricating oils Main Fields Of Application For generation of pressure in oil-hydraulic systems, lubricating oil supplying, general industrial technologies

Pressure: 0 bar - 27.6 bar
Power: 5.5 kW
Fluid temperature: -32 °C - 107 °C

Overview LWB-150 LPG Turbine Pump,for high differential pressure application using, for underground and aboveground tank application. Advantage A cost effective alternative to submersible designs. Meeting ...

Flow: 0 us gal/min - 55,000 us gal/min
Pressure: 0 psi - 115 psi
Head: 0'00" ft - 180'00"

TYPE MCV Single stage vertical centrifugal, sleeve-bearing pump. Handling of abrasive and corrosive liquids Vertical mixed flow pump designed for desalination plants to work as intake pump Suitable ...

Sample Pro Low Flow Pneumatic Groundwater Sampling Pump The Sample Pro portable pump combines the unparalleled sample accuracy and high reliability of a bladder pump in an easy-to-use ...

Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 30 bar
Head: 0 m - 300 m

The Osna VKI is an array of high-pressure multi-stage vertical pumps for pumping clear and slightly contaminated liquids in pressure boosting plants, cold and hot water circulation, filter units, machine tools, and irrigation ...

Flow: 700 m³/h

... is a line-shaft pump engineered by Pompe Garbarino. It is vertically suspended, and features a single stage configuration. The parts of this unit are designed based on MU or MCA pumps. The pump ...