Under load pumps

Additional eccentric screw pump on carriage, with temperature controlled pipeline and pressure maintaining valve that only opens if the system has reached the required pressure.

... Our screw pumps are specific to pump waste, rain, drinking water and sludge. This tool, with more than 2000 years of history, has evolved and been perfected to adapt to each epoch. We now offer design, manufacturing, assembly and start-up of this machinery ...

Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C

... The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via a separate line, directly from the pump. It is particularly ...

Flow: 5, 10.5 l/min
Power: 0.06 kW

... - Working Pressure: 1 - 5 Kg/cm - Max. painting pressure: 5 Kg/cm - Max. pump speed: 160 times/min. - Air consumption: 11.5 CFM - Free speed: (1:1) 5 200 RPM - Agitation shaft: 8 mm - Proppeler: 60 mm -Diameter of ring: 318 mm ...

The EUR 1 pneumatic pump is a single-acting pump suitable for all types of applications. The maximum amount of grease supplied during every pumping cycle is 30 cm³ (an amount that is approximately sufficient for 100 lubrication nozzles). The pump supplies, ...

Pressure: 18.5 bar - 34.3 bar
Power: 224 kW - 1,275 kW

Drilling pump is also called mud pump, which transport high pressure, high specific gravity, high sand concentration drilling fluid to bottom of hole. Drilling fluid is used to cool bit, wash out bottom of hole, break rock and bring out debris. Drilling ...

... A wide range of piston and diaphragm pumps are available for use with fluids from water consistencies up to pastes. Materials include: - Adhesives - Epoxies - Lubricants - Mastics - Silicones - Urethanes Configurations ...

Flow: 10 l/min

The Viscomat - DC is a new range of transfer pumps and are utilized for those provisions where it is important to exchange the oil from stem or tanks and where it is not display for the association with the force line or to the establishment of compacted ...

The archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow clearance which well meet the lifting requirements for water containing ...

Pressure: 0 bar - 350 bar
Power: 50 W

... PEG-520 is pump for grease with a 2 kg transparent reservoir.The standard version comes with a single output, additional pumping elements will have to be ordered separately. ...

Flow: 45 l/min - 90 l/min
Pressure: 0.06, 0.3 MPa
Power: 0.75 kW

... The BT90 pump is applicable to gasoline, kerosene, diesel and some compatible fuel. Its inside construction includes Air Separator, Check Valve, By-pass Valve, Float Valve, Overflow Prevention Valve, Inlet and Outlet Filter, etc. Features and Benefits: ØSmall ...

Flow: 10 l/min
Pressure: 10 bar
Power: 0.55 kW

... ELECTRIC PUMP FOR FRESH OIL GEAR PUMP TZ10I, NON-CALIBRATABLE, NON-PORTABLE Electrically-driven gear pump for pumping and dispensing liquid lubricating, non-flammable media. Description For engine oil, gear oil, hydraulic oil and radiator antifreeze ...

Flow: 6.5 l/min
Pressure: 420 MPa
Power: 60 ch

... DOUBLE INTENSIFIERS STRUCTURE CAN DRIVE 4 ROBOT ARMSAT THE SAME TIME. Motor Rating：45kW/60HP Pressure Range (Deadhead) ：60,000psi Flow Rate at Max. Pressure：1.5gal/min Attenuator Volume：2L Length：66.93in Width：43.31in Height：55.12in ...

Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m

Diesel engine centrifugal pumps are commonly used in various applications where large volumes of liquids need to be moved or pressurized. They are commonly used in water supply systems, irrigation systems, agricultural applications, industrial processes, ...

Power: 0 kW - 55 kW

... Hydraulic pump motor unit - for applications where the system requires hydraulic flow. The AC Hydraulic motor pumps are made up of an AC Motor driving a Hydraulic gear pump assembly. AC Motors are either 240V 1 phase or 415V 3 phase. As standard the ...

Product feeling pump with pneumatic or electric functioning. The pump lets to transfer the product by the undervacuum homogenizer to the hopper of the filling machine. It can stop itself thanks to an ultranonic level probe. With this system the product ...

The Bigas Alsina, S.A. blood pumps, are designed to allow the transport of this waste material in an efficient way, avoiding all those problems that ussualy arise inside the pumps, due in most cases because are not prepared for doing this job. It's the ...

Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW

The PCM EcoMoineau™ MX pump comes with an integrated maintenance in place system as a standard feature. It is specifically designed to provide easy and rapid maintenance. Thanks to its maintenance in place system, maintenance operations can be carried ...

Flow: 130 l/min
Pressure: 0.3 bar

... Specification Voltage 220-240 V Frequency 50 Hz Overheating protection Thermal cut-off Degree of protection IP00 Ambient temperature up to 60° C Higher on request Insulation class F Phase 1~ Life time Depends on application and medium to be ...

Pressure: 4 bar - 8 bar

... Piston metering pneumatic pump with 1.2L and 4L transparent oil tank Piston metering pneumatic pump, air pressure 4-8bar, 0-0.04ml/stroke; ...

Flow: 0.01 l/min
Pressure: 20 MPa
Power: 24 W

... Progress method ● Use manufacturer's warranty grease. ● Never use molybdenum disulfide grease. ● Use lithium grease. (If it is other than Lube original grease, please be sure to consult.) ● Be careful not to mix any foreign matter when replenishing ...

... Having a properly sized pump and reliable water supply for the evaporation system is critical to performance. Coldmist offers a full range of pumps and water supply options including: Small evaporator pumps (for 1 – 2 evaporators), Medium (for ...

Flow: 1,350 l/min - 2,200 l/min
Pressure: 60,000, 70,000, 80,000 Pa
Power: 2.2, 3.7 kW

... Continuous Operating Vacuum 60 kPa or less (V/VB) 80 kPa or less (VH / VBH) Continuous Operating Pressure 60 kPa or less (B/VB) 70 kPa or less (BH) 80 kPa or less (VBH) Flow Rate 1350 to 2200 L/min (60 Hz) • Safe and Environmentally Conscious CE ...

Flow: 20 m³/h - 40 m³/h
Pressure: 0 MPa
Power: 4,000 W

... ◆ The water powder mixing pump is sufficiently blended with a high-speed rotating impeller to deliver the desired mixture. ◆ Uses: Suitable for milk powder, whey powder, paste powder, etc., etc., and liquids are mixed with liquids. The mixier is used ...

Flow: 0 m³/h - 475 m³/h
Pressure: 6 bar
Power: 0.55 kW - 30 kW

... The MPTK-I pump is a highly efficient chopper-pump which is designed for pumping heavily contaminated fluids, as well as fluids with a high content of solids. All MPTK-I pumps are equipped with a knife system at the inlet to the pump, which ensures ...